Building Materials - Aluminum Part 2

通報

問題一覧

How much lighter is titanium compared to stee

40%

What metals are commonly alloyed with titanium

Aluminum, iron, molybdenum, and manganese

Is a metal containing iron as a principal

ferrous metal

Is any metal containing little or no iron

Non-ferrous metal

A malleable, ductile, magnetic, silver-white metallic element from which pig iron and steel are made

iron

What is the commercial form in which iron is first prepared

pig iron

What is the carbon content in pig iron

3% to 4%

The types of cast iron that generally

Gray cast iron, Malleable cast iron

Cast iron that has been annealed by transforming the carbon content into graphite and removing it completely

Malleable cast iron

A tough, malleable, relatively soft iron that is readily forged and welded, having a fibrous structure containing approximately 0.2% corbon and a small amount of uniformly distributed slag

Wrought iron

What percentage of slag (iron silicate) does wrought iron contain

2.5%

In what forms is wrought iron available

Pipes, plates, sheets, special shapes, and bars

Any various iron-based our having a carbon content less than that of a cast iron and more than that wronght iron

steel

Which of the following are considered impurities in steel

Phosphorus, sulfur, oxygen, and nitrogen

What is the minimum iron content in plain carbon steel

95%

What is the maximum carbon content in steel

Ordinary an alloyed steel in which the residual elements, as carbon, manganese, phosphorus sulfur and silicon are controled

carbon steel

A low-carbon steel containing from 0.15-0.25% carbon, also called soft steel

mild steel

What is the carbon content range of mild steel

0.15-0.25%

What is the maximum width for steel strip as per the definition

12 inches

What gauge sizes are commonly available for corrugated steel

18, 20, 22, 24, 26

Rigidized sheet fabricated from low-carbon cold or hot-rolled steel sheets which are either galvanized or covered with some type of bituminous coating.

corrugated steel

Used for concrete reinforcement, lath for plaster, stucco, and cement, fence, insect screens

steel mesh and wire cloth

Used windows and doors for residential, commercial, industrial, institutional and other types such as for fire-rated materials

steel windows and doors

Used for finished hardware and other miscellaneous accessories such as males screws, rivets, etc

hardware

A carbon steel containing from 0.25-0.45% carbon

medium steel

A medium carbon steel with its carbon content control to give both the strength and ductility necessary for its use.

structural steel

What are the available angle of structural steel channels

I - beams, H - beams, T - beams, Z - beams

These are usually used for reinforcing treatment and are available in commercial sizes

reinforcing bars

A high carbon steel containing 0.45-0.85% carbon

Hard steel

A high-carbon steel containing 0.85-1.80% carbon

spring steel

A carbon steel containing more than 1.50% carbon. These steels are high quality carbon and alloys steels that are commonly used to make cutters, reamers, bits, etc. Used for machining metels, plastics, and wood

cast steel/carbon tool steel

Descriptive happy metal that has been formed at room temperature, usually to obtain desire or improve surface finish for higher tensile strength

cold forme/cold rolled

Descriptive okay na tab for obtained by rolling the metal while still hot, results in dark, oxidized simply rough surfaces

Hot rolled

"cor-ten steel", are high strength, hello anong steel with a carbon constant of less than 0.2% by weight. It was originally developed in the 1930s by the United States Steel to prevent corrosion and abrasion in their ore wagons

weathering steel

A hot rolled structural steel section having a H shape with wide parallel flanges, designated by the prefix W followed by the size and weight of the member

W shape

A hot-rolled structural steel shape similar to but not classified as W shape, designated by the prefix M followed by the size and weight of member

M shape

A hot-rolled structural steel section similar to W shape but having flanges and web of equal thickness and typically used as load bearing pile, designated by the prefix HP the size and weight of the member

HP shape

A hot-rolled structural steel section having I shape with slope inner flange surfaces, designated by the prefix S followed by the size of the weight of the member also called american standard be

S shape

A hot rolled structural steel section having a rectangular C shape with slope inner flange surfaces, designated by the prefix C followed by the size and weight of the member

American Standard Channel

A hot rolled steel section similar to C shape but designated by the prefix MC followed by the size and weight of the member

miscellaneous channel

A hot rolled structural steel section having a L shape, designated by the prefix followed by the length of each leg and their thickness also called:

iron angle

an angle iron having leg of equal length

equal angle

an angle iron having legs of unequal length

unequal leg angle

A structural member consisting of a pair of angles joined back to back

double angle

Name the Steel Section

S Shape, W Shape, HP Shape, M Shape

Name the Channel

C Shape, MC Shape, L Shape, Double angle

A structural section cut from W, S or M-shaped are having T shape. It is designated by the prefix WT, ST or MT depending on the section from which it cut

structural tee

A rolled metal bar having a T-shaped cross also called T-bar

tee

A rolled metal bar having a Z-shaped cross also called Z-bar

zee

A rolled metal bar having a T-shaped cross also called T-bar

tee

A long, solid piece of metal, esp. one having a square, rectangular or other simple cross section shape

bar

A hollow structural steel shape of square, angular or circular section. It is designated by the prefix TS followed by the side dimensions or diameter and the wall thickness

structural tubing

A pipe a standard weight of wall thickness, designated as pipe (nominal inside diameter) standard.

standard pipe

A structural steel pipe having increased sickness for greater strength, designated as Pipe (nominal inside diameter) X- strong

extra-strong pipe

A structural steel pipe having a wall thickness greater than that of extra-strong pipe, designated pipe (nominal insight diameter) XX- strong

double extra strong pipe

Name the Structural Tee

WT Shape, MT Shape, ST Shape

What is the primary material used for reinforcement in concrete construction

Steel bars

What are the two types of steel bars

Billet-steel bars and rail-steel bars

Are made by the open hearth furnace by the acid Bessemer furnace from ingots and come in three grades: structural, intermediate and hard. For architectural purposes the intermediate grade is the most generally used

billet-steel bars

Are rolled from standard T-rails and come only in one grade

rail-steel bars

What is the range of steel bar diameters

6mm to 31mm

What are the standard lengths of steel bars

6m and 10m

A steel bar for reforcing concrete, usually specified by the number equivalent to its diameter in eight of an inches are in millimeters

reinforcing bar

A reinforcing bar, hot rolled with surface deformations to develop a greater bound with concrete

deformed bar

Type of bar, for be like supplement requirement, S1 (A615)

Type S

Type of bar, for new billet (A615)

Type N

Type of bar, for rail meeting ASTM A617, grade 60 bend

Type R

Type of bar, for rail (A616)

Type I

Type of bar, for axle (A617)

Type A

Type of bar, for low alloy (A706)

Type W

What is the specified yield point for ASTM A615 steel

Grades 40 and 60

What is the specified yield point for ASTM A616 steel

Grades 50 and 60

What is the specified yield point for ASTM A617 steel

Grades 40 and 60

What is the specified yield point for ASTM A706 steel

Grades 60

Which ASTM designation corresponds to low- alloy steel

ASTM A706

Which ASTM designation corresponds to billet steel

ASTM A615

Which ASTM designation corresponds to axle steel

ASTM A617

Which ASTM designation corresponds to rail steel

ASTM A616

Philippine Standard Designation: 6mm Near ASTM Designation: ______ & ______ Nominal Sectional Area (mm 2): ______ Unit Weight (kg/m): ______

#2, 1/4", 28.27, 0.222

Philippine Standard Designation: 10mm Near ASTM Designation: ______ & ______ Nominal Sectional Area (mm 2): ______ Unit Weight (kg/m): ______

#3, 3/8", 78.54, 0.616

Philippine Standard Designation: 12mm Near ASTM Designation: ______ & ______ Nominal Sectional Area (mm 2): ______ Unit Weight (kg/m): ______

#4, 1/2", 113.10, 0.888

Philippine Standard Designation: 16mm Near ASTM Designation: ______ & ______ Nominal Sectional Area (mm 2): ______ Unit Weight (kg/m): ______

#5, 5/8", 201.10, 1.579

Philippine Standard Designation: 20mm Near ASTM Designation: ______ & ______ Nominal Sectional Area (mm 2): ______ Unit Weight (kg/m): ______

#6, 3/4", 314.20, 2.466

Philippine Standard Designation: 28mm Near ASTM Designation: ______ & ______ Nominal Sectional Area (mm 2): ______ Unit Weight (kg/m): ______

#9, 1-1/8", 615.75, 4.833

Philippine Standard Designation: 26mm Near ASTM Designation: ______ & ______ Nominal Sectional Area (mm 2): ______ Unit Weight (kg/m): ______

#8, 1", 491.90, 3.854

Philippine Standard Designation: 32mm Near ASTM Designation: ______ & ______ Nominal Sectional Area (mm 2): ______ Unit Weight (kg/m): ______

#10, 1-1/4", 804.25, 6.313

Philippine Standard Designation: 32mm Near ASTM Designation: ______ & ______ Nominal Sectional Area (mm 2): ______ Unit Weight (kg/m): ______

#11, 1-3/8", 1017.90, 7.991

A grid of longitudinal and transverse steel wires or bars welded together at all points of intersection, usually specified by the size of breed in inches and the wire gauge, also called welded wire mesh

welded wire fabric

A mesh of cold drones tail wires mechanically twisted from the hexagonally shaped openings. Also call triangle mesh wire fabric.

woven wire fabric

What is dimension of longitudinal wires from centers

What is dimension of cross wires apart

4" or 8"

manufactured from solid steel sheets which may be stamped, perforated, or deformed into an opening mesh. The forms into which sheet can be shaped include diamond, crimp, herringbone and Z-rib

expanded mesh

permanent centering or self centering laths are produced in many forms. Laths are furnish either in flat or segmental sheets, press into a series of solid ribs, between which the metal stamped, perforated or deformed in two open mesh-work

lathe

A carbon steel to which various elements, as chromium, cobalt, copper, manganese, molybdenum, nickel, tungsten, or vanadium, have been added in sufficient amount of take particular physical or chemical properties

alloy steel

A high strength, hello alloy steel that forms an oxidized coating when exposed to rain or moisture in the atmosphere which adheres firmly to the base of the metal

weathering steel

Any of a group of low carbon steels containing less than 2% alloy in a chemical composition specifically develop or increased strength, ductility and resistance to corrosion

high strength low-alloy steel

An ally containing a minimum 12% chromium sometimes with nickel, manganese or molybdenum as additional. Characterized by their resistance to heat, oxidation and corrosion

stainless steel

Building laws Part 1

Building laws Part 1

Building laws Part 2

Mari Alberca · 99問 · 1年前

Building laws Part 2

99問 • 1年前

Building laws Part 3

Building laws Part 3

Building laws Part 4

Building laws Part 4

Building Iaws Part 5

Building Iaws Part 5

Building Iaws Part 6

Building Iaws Part 6

Building Iaws Part 7

Mari Alberca · 48問 · 1年前

Building Iaws Part 7

48問 • 1年前

Architectural Design & Site Planning Part 1

Architectural Design & Site Planning Part 1

Architectural Design & Site Planning Part 2

Mari Alberca · 99問 · 1年前

Architectural Design & Site Planning Part 2

99問 • 1年前

Architectural Design & Site Planning Part 3

Architectural Design & Site Planning Part 3

Architectural Design & Site Planning Part 5

Architectural Design & Site Planning Part 5

Architectural Design & Site Planning Part 6

Architectural Design & Site Planning Part 6

Architectural Design & Site Planning Part 7

Architectural Design & Site Planning Part 7

Architectural Design & Site Planning Part 8

Architectural Design & Site Planning Part 8

Architectural Design & Site Planning Part 9

Architectural Design & Site Planning Part 9

Architectural Design & Site Planning Part 10

Mari Alberca · 30問 · 1年前

Architectural Design & Site Planning Part 10

30問 • 1年前

Mari Alberca · 105問 · 1年前

Plumbing Part 1

Plumbing Part 1

105問 • 1年前

Plumbing Part 2

Plumbing Part 2

Mari Alberca · 104問 · 1年前

Plumbing Part 3

Plumbing Part 3

104問 • 1年前

Plumbing Part 4

Plumbing Part 4

Plumbing Part 5

Plumbing Part 5

Mari Alberca · 101問 · 1年前

Plumbing Part 6

Plumbing Part 6

101問 • 1年前

Building Material Part 1

Mari Alberca · 99問 · 1年前

Building Material Part 1

99問 • 1年前

Building Material Part 2

Building Material Part 2

Building Material Part 3

Building Material Part 3

Mari Alberca · 104問 · 1年前

Building Materials - Sitework

Building Materials - Sitework

104問 • 1年前

Building Materials - Concrete Part 1

Building Materials - Concrete Part 1

Mari Alberca · 110問 · 1年前

Building Materials - Concrete Part 2

Building Materials - Concrete Part 2

110問 • 1年前

Mari Alberca · 110問 · 1年前

Building Materials - Concrete Part 3

Building Materials - Concrete Part 3

110問 • 1年前

Building Materials - Masonry Part 1

Building Materials - Masonry Part 1

Structural Conceptualization Part 1

Mari Alberca · 96問 · 1年前

Structural Conceptualization Part 1

96問 • 1年前

Structural Conceptualization Part 2

Structural Conceptualization Part 2

Structural Conceptualization Part 3

Structural Conceptualization Part 3

Structural Conceptualization Part 4

Structural Conceptualization Part 4

Structural Conceptualization Part 5

Mari Alberca · 46問 · 1年前

Structural Conceptualization Part 5

46問 • 1年前

Theory of Architecture Part 1

Theory of Architecture Part 1

Theory of Architecture Part 2

Theory of Architecture Part 2

Theory of Architecture Part 3

Theory of Architecture Part 3

Theory of Architecture Part 4

Theory of Architecture Part 4

Professional Practice

Mari Alberca · 79問 · 1年前

Professional Practice

79問 • 1年前

Mock Exam 1

Mari Alberca · 27問 · 1年前

Mock Exam 1

27問 • 1年前

Great Buildings

Mari Alberca · 72問 · 1年前

Great Buildings

72問 • 1年前

Electrical & Mechanical Part 1

Mari Alberca · 91問 · 1年前

Electrical & Mechanical Part 1

91問 • 1年前

Filipino Architect

Mari Alberca · 60問 · 1年前

Filipino Architect

60問 • 1年前

Electrical & Mechanical Part 2

Mari Alberca · 26問 · 1年前

Electrical & Mechanical Part 2

26問 • 1年前

Ph Architecture

Mari Alberca · 22問 · 1年前

Ph Architecture

22問 • 1年前

vernacular terms filipino

Mari Alberca · 96問 · 1年前

vernacular terms filipino

96問 • 1年前

Tropical design

Tropical design

Tropical design 2

Tropical design 2

Tropical design 3

Tropical design 3

Tropical design 4

Mari Alberca · 46問 · 1年前

Tropical design 4

46問 • 1年前

Building Materials - Masonry Part 2

Mari Alberca · 56問 · 1年前

Building Materials - Masonry Part 2

56問 • 1年前

Building Materials - Aluminum Part 1

Building Materials - Aluminum Part 1

Building Materials - Wood Part 1

Building Materials - Wood Part 1

Building Materials - Wood Part 2

Mari Alberca · 70問 · 1年前

Building Materials - Wood Part 2

70問 • 1年前

Mari Alberca · 101問 · 1年前

Building Materials - Plastic Part 1

Building Materials - Plastic Part 1

101問 • 1年前

Mari Alberca · 141問 · 1年前

Building Materials - Thermal and Moisture Protection

Building Materials - Thermal and Moisture Protection

141問 • 1年前

Mari Alberca · 107問 · 1年前

Building Materials - Doors

Building Materials - Doors

107問 • 1年前

HOA - Ancient Architecture

Mari Alberca · 42問 · 1年前

HOA - Ancient Architecture

42問 • 1年前

HOA - Western Asia

Mari Alberca · 80問 · 1年前

HOA - Western Asia

80問 • 1年前

HOA - Ancient Egypt

Mari Alberca · 90問 · 1年前

HOA - Ancient Egypt

90問 • 1年前

Mari Alberca · 232問 · 1年前

HOA - Ancient Greek

HOA - Ancient Greek

232問 • 1年前

Building Materials - Windows

Mari Alberca · 75問 · 1年前

Building Materials - Windows

75問 • 1年前

Mari Alberca · 138問 · 1年前

Buildings Materials - Hardwares

Buildings Materials - Hardwares

138問 • 1年前

Mari Alberca · 149問 · 1年前

Buildings Materials - Hardwares (Images)

Buildings Materials - Hardwares (Images)

149問 • 1年前

Mari Alberca · 119問 · 1年前

Buildings Materials - Finish Hardwares

Buildings Materials - Finish Hardwares

119問 • 1年前

Mari Alberca · 156問 · 1年前

Buildings Materials - Finish Hardwares (Images)

Buildings Materials - Finish Hardwares (Images)

156問 • 1年前

Building Materials - Glass & Glazing

Mari Alberca · 69問 · 1年前

Building Materials - Glass & Glazing

69問 • 1年前

Mari Alberca · 178問 · 1年前

HOA - Roman

HOA - Roman

178問 • 1年前

HOA - Mesoamerica

Mari Alberca · 20問 · 1年前

HOA - Mesoamerica

20問 • 1年前

Building Material - Glass & Glazing (Images)

Mari Alberca · 25問 · 1年前

Building Material - Glass & Glazing (Images)

25問 • 1年前

Mari Alberca · 181問 · 1年前

Building Materials - Finishes

Building Materials - Finishes

181問 • 1年前

HOA - Byzantine

Mari Alberca · 77問 · 1年前

HOA - Byzantine

77問 • 1年前

Building Materials - Finishes (Images)

Mari Alberca · 39問 · 1年前

Building Materials - Finishes (Images)

39問 • 1年前