Item 301 Bituminous Prime Coat

10 questions • 2026-01-10
Anonymous
Report

Question

1 Quality Test for every ____ or ____.

Answer

Question

Shall be only applied to surfaces which are dry or slightly moist

Answer

Question

The liquid bituminous material shall be sprayed by means of a pressure distributor of not less than ____ capacity.

  • 1000L

  • 1500L

  • Skip

Question

Pressure distributor mounted on pneumatic tires of such width and number that the load produced on the road surface will not ____ per cm width of tire.

  • 1kN

  • 2kN

  • Skip

Question

The tank shall have a heating device able to heat a complete change of bituminous liquid to ____.

  • 135°C

  • 180°C

  • Skip

Question

The drop on temperature when the tank is filled with bituminous liquid and not heated will be less than:

  • 2°C per hour

  • 3°C per hour

  • Skip

Question

The distributor shall be designed so that the deviation from the prescribed rate of application does not exceed ___ and shall be equipped with a device for hand spraying of the bituminous liquid.

  • 10%

  • 15%

  • Skip

Question

The rate of application of the bituminous material shall be within the range of ____.

  • 0.2 to 0.7 L/sq.m

  • 1 to 2 L/sq.m

  • Skip

Question

The prime coat shall be left undisturbed for a period of at least ___ or until such time it has sufficiently cured as determined by the engineer and shall not be opened to traffic.

  • 12 hrs

  • 24 hrs

  • Skip

Question

Bituminous Prime Coat shall be measured by:

Answer

Item 301 Bituminous Prime Coat

TestMaker

Score

0 / 10

Correct rate

0%

Correct: 0

Incorrect: 0

Unanswered: 10

 
ankimaker.com

Question list

  • 1

    1 Quality Test for every ____ or ____.

    40T, 200 drums

  • 2

    Shall be only applied to surfaces which are dry or slightly moist

    prime coat

  • 3

    The liquid bituminous material shall be sprayed by means of a pressure distributor of not less than ____ capacity.

    1000L

  • 4

    Pressure distributor mounted on pneumatic tires of such width and number that the load produced on the road surface will not ____ per cm width of tire.

    1kN

  • 5

    The tank shall have a heating device able to heat a complete change of bituminous liquid to ____.

    180°C

  • 6

    The drop on temperature when the tank is filled with bituminous liquid and not heated will be less than:

    2°C per hour

  • 7

    The distributor shall be designed so that the deviation from the prescribed rate of application does not exceed ___ and shall be equipped with a device for hand spraying of the bituminous liquid.

    10%

  • 8

    The rate of application of the bituminous material shall be within the range of ____.

    1 to 2 L/sq.m

  • 9

    The prime coat shall be left undisturbed for a period of at least ___ or until such time it has sufficiently cured as determined by the engineer and shall not be opened to traffic.

    24 hrs

  • 10

    Bituminous Prime Coat shall be measured by:

    square meter