CGD - Sanitary Design | 暗記メーカー

暗記メーカー

CGD - Sanitary Design

19問 • 13日前

ユーザ名非公開

問題一覧

1

A pipe installed to vent, a fixture trap and which connects with the vent system above the fixture served or terminates in the open air.

Individual vent

2

Trap size of fixtures for Wash basin.

1 ¼"

3

Trap size of fixtures for slop sinks (ordinary).

2”

4

Minimum cost. Least efficient subject to clogging, noisy. Simple washout and emptying through small irregular passage way, prohibited by some health codes.

Wash down

5

Trap size of fixtures for Urinals (through).

2”

6

Includes water supply and distribution pipe; plumbing fixture and traps, soil, waste and vent pipes; house drain and house sewers including their respective connections.

Plumbing system

7

Trap size of fixtures for Water closets.

3”

8

Ratio of water closets for female population for elementary and secondary school.

Ratio of 1:30

9

A valve which in the water flow is shut off by a flat disk that is screwed down onto its seat.

Compression valve

10

The luminous flux density incident on a surface.

Illumination

11

A short length of pipe with threads at each end; used to join couplings or fittings.

Nipple

12

Trap size of fixtures for Sinks (Dishwashers).

1”

13

A pipe connecting upward from a soil and waste stack to a vent stack for the purpose of preventing pressure changes in the stack.

Yoke vent

14

Trap size of fixtures for Drinking Fountain.

1 ¼"

15

A trench containing course aggregate and distribution tile pipe through which septic tank effluent may flow covered with earth.

Absuption trench

16

Trap size of fixtures for Combination Fixture.

1 ½"

17

Color coding of high pressure steam.

White

18

A passage under a road, embankment or canal which allow for the flow of water.

Culvert

19

Is the backflow of used, contaminated or polluted water from a plumbing fixture due to negative pressure.

Back siphonage

YT1 Materials Engineer EXAM

YT1 Materials Engineer EXAM

ユーザ名非公開 · 100問 · 13日前

YT1 Materials Engineer EXAM

YT1 Materials Engineer EXAM

100問 • 13日前

ユーザ名非公開

YT2 Materials Engineer EXAM

YT2 Materials Engineer EXAM

ユーザ名非公開 · 100問 · 13日前

YT2 Materials Engineer EXAM

YT2 Materials Engineer EXAM

100問 • 13日前

ユーザ名非公開

Project Engineer YT 1

Project Engineer YT 1

ユーザ名非公開 · 100問 · 13日前

Project Engineer YT 1

Project Engineer YT 1

100問 • 13日前

ユーザ名非公開

Project Engineer EXAM

Project Engineer EXAM

ユーザ名非公開 · 62問 · 13日前

Project Engineer EXAM

Project Engineer EXAM

62問 • 13日前

ユーザ名非公開

Project Engineer EXAM 68

Project Engineer EXAM 68

ユーザ名非公開 · 100問 · 13日前

Project Engineer EXAM 68

Project Engineer EXAM 68

100問 • 13日前

ユーザ名非公開

Project Engineer EXAM 82

Project Engineer EXAM 82

ユーザ名非公開 · 100問 · 13日前

Project Engineer EXAM 82

Project Engineer EXAM 82

100問 • 13日前

ユーザ名非公開

July 2023 PE Refresher

July 2023 PE Refresher

ユーザ名非公開 · 70問 · 13日前

July 2023 PE Refresher

July 2023 PE Refresher

70問 • 13日前

ユーザ名非公開

August 2019 Special PE Exam

August 2019 Special PE Exam

ユーザ名非公開 · 93問 · 13日前

August 2019 Special PE Exam

August 2019 Special PE Exam

93問 • 13日前

ユーザ名非公開

RNPCP Chapter 1 to 5

RNPCP Chapter 1 to 5

ユーザ名非公開 · 86問 · 13日前

RNPCP Chapter 1 to 5

RNPCP Chapter 1 to 5

86問 • 13日前

ユーザ名非公開

Plumbing Code 4

Plumbing Code 4

ユーザ名非公開 · 100問 · 13日前

Plumbing Code 4

Plumbing Code 4

100問 • 13日前

ユーザ名非公開

Plumbing Code 5

Plumbing Code 5

ユーザ名非公開 · 100問 · 13日前

Plumbing Code 5

Plumbing Code 5

100問 • 13日前

ユーザ名非公開

Plumbing Code 6

Plumbing Code 6

ユーザ名非公開 · 100問 · 13日前

Plumbing Code 6

Plumbing Code 6

100問 • 13日前

ユーザ名非公開

Plumbing Code 7

Plumbing Code 7

ユーザ名非公開 · 100問 · 13日前

Plumbing Code 7

Plumbing Code 7

100問 • 13日前

ユーザ名非公開

Plumbing Code 8

Plumbing Code 8

ユーザ名非公開 · 100問 · 13日前

Plumbing Code 8

Plumbing Code 8

100問 • 13日前

ユーザ名非公開

Plumbing Code 3

Plumbing Code 3

ユーザ名非公開 · 100問 · 13日前

Plumbing Code 3

Plumbing Code 3

100問 • 13日前

ユーザ名非公開

Sanitation, Plumbing Design, and Installation 2

Sanitation, Plumbing Design, and Installation 2

ユーザ名非公開 · 97問 · 13日前

Sanitation, Plumbing Design, and Installation 2

Sanitation, Plumbing Design, and Installation 2

97問 • 13日前

ユーザ名非公開

Sanitation, Plumbing Design, and Installation 1

Sanitation, Plumbing Design, and Installation 1

ユーザ名非公開 · 99問 · 13日前

Sanitation, Plumbing Design, and Installation 1

Sanitation, Plumbing Design, and Installation 1

99問 • 13日前

ユーザ名非公開

Sanitation, Plumbing Design, and Installation 3

Sanitation, Plumbing Design, and Installation 3

ユーザ名非公開 · 96問 · 13日前

Sanitation, Plumbing Design, and Installation 3

Sanitation, Plumbing Design, and Installation 3

96問 • 13日前

ユーザ名非公開

Sanitation, Plumbing Design, and Installation 4

Sanitation, Plumbing Design, and Installation 4

ユーザ名非公開 · 95問 · 13日前

Sanitation, Plumbing Design, and Installation 4

Sanitation, Plumbing Design, and Installation 4

95問 • 13日前

ユーザ名非公開

Sanitation, Plumbing Design, and Installation 5

Sanitation, Plumbing Design, and Installation 5

ユーザ名非公開 · 97問 · 13日前

Sanitation, Plumbing Design, and Installation 5

Sanitation, Plumbing Design, and Installation 5

97問 • 13日前

ユーザ名非公開

問題一覧

1

A pipe installed to vent, a fixture trap and which connects with the vent system above the fixture served or terminates in the open air.

Individual vent

2

Trap size of fixtures for Wash basin.

1 ¼"

3

Trap size of fixtures for slop sinks (ordinary).

2”

4

Minimum cost. Least efficient subject to clogging, noisy. Simple washout and emptying through small irregular passage way, prohibited by some health codes.

Wash down

5

Trap size of fixtures for Urinals (through).

2”

6

Includes water supply and distribution pipe; plumbing fixture and traps, soil, waste and vent pipes; house drain and house sewers including their respective connections.

Plumbing system

7

Trap size of fixtures for Water closets.

3”

8

Ratio of water closets for female population for elementary and secondary school.

Ratio of 1:30

9

A valve which in the water flow is shut off by a flat disk that is screwed down onto its seat.

Compression valve

10

The luminous flux density incident on a surface.

Illumination

11

A short length of pipe with threads at each end; used to join couplings or fittings.

Nipple

12

Trap size of fixtures for Sinks (Dishwashers).

1”

13

A pipe connecting upward from a soil and waste stack to a vent stack for the purpose of preventing pressure changes in the stack.

Yoke vent

14

Trap size of fixtures for Drinking Fountain.

1 ¼"

15

A trench containing course aggregate and distribution tile pipe through which septic tank effluent may flow covered with earth.

Absuption trench

16

Trap size of fixtures for Combination Fixture.

1 ½"

17

Color coding of high pressure steam.

White

18

A passage under a road, embankment or canal which allow for the flow of water.

Culvert

19

Is the backflow of used, contaminated or polluted water from a plumbing fixture due to negative pressure.

Back siphonage