Item 201 Aggregate Base Course

16 questions • 2026-01-10
Anonymous
Report

Question

Grading Test and Plasticity Test (LL, PL, PI) for every:

Answer

Question

Laboratory Compaction Test and Quality Test (Grading, Plasticity, and Abrasion) for every

Answer

Question

California Bearing Ratio (CBR) Test for every:

Answer

Question

For every ____ of compacted depth at least ____ in situ density tests for every ____ or fraction thereof.

Answer

Question

In some areas where conventional base course materials are scarce or non-available, the use of ___ weathered limestone blended with ___ crushed stones or gravel shall be allowed, provided that the blended materials meet the requirements of this Item.

  • 40%, 60%

  • 60%, 40%

  • Skip

Question

The fraction passing the No. 200 sieve (0.075mm) shall not be greater than ___ of the fraction passing the No. 40 sieve (0.425mm).

  • 1/3

  • 2/3

  • Skip

Question

According to AASHTO T89 and T90, the fraction passing the No. 40 sieve (0.425mm) shall have a LL of not greater than ___ and PI of not greater than ___.

  • 25, 6

  • 35, 12

  • Skip

Question

According to AASHTO T96, the course portion retained on a No. 10 sieve (2mm) shall have a mass percent of wear of ___ max by the Los Angeles Abrasion Test.

  • 15%

  • 50%

  • 80%

  • Skip

Question

According to AASHTO T193, the material passing 19mm sieve shall have a soaked CBR value of not less than ___.

  • 15%

  • 50%

  • 80%

  • Skip

Question

Filler shall be taken from sources approved by the engineer, free from hard slumps, and shall not contain more than ___ of material retained on the No.4 sieve (4.75mm).

  • 15%

  • 50%

  • 80%

  • Skip

Item 201 Aggregate Base Course

TestMaker

Score

0 / 10

Correct rate

0%

Correct: 0

Incorrect: 0

Unanswered: 10

 
ankimaker.com

Question list

  • 1

    Grading Test and Plasticity Test (LL, PL, PI) for every:

    300cu.m

  • 2

    Laboratory Compaction Test and Quality Test (Grading, Plasticity, and Abrasion) for every

    1500cu.m

  • 3

    California Bearing Ratio (CBR) Test for every:

    2500cu.m

  • 4

    For every ____ of compacted depth at least ____ in situ density tests for every ____ or fraction thereof.

    150mm, three, 500sq.m

  • 5

    In some areas where conventional base course materials are scarce or non-available, the use of ___ weathered limestone blended with ___ crushed stones or gravel shall be allowed, provided that the blended materials meet the requirements of this Item.

    40%, 60%

  • 6

    The fraction passing the No. 200 sieve (0.075mm) shall not be greater than ___ of the fraction passing the No. 40 sieve (0.425mm).

    2/3

  • 7

    According to AASHTO T89 and T90, the fraction passing the No. 40 sieve (0.425mm) shall have a LL of not greater than ___ and PI of not greater than ___.

    25, 6

  • 8

    According to AASHTO T96, the course portion retained on a No. 10 sieve (2mm) shall have a mass percent of wear of ___ max by the Los Angeles Abrasion Test.

    50%

  • 9

    According to AASHTO T193, the material passing 19mm sieve shall have a soaked CBR value of not less than ___.

    80%

  • 10

    Filler shall be taken from sources approved by the engineer, free from hard slumps, and shall not contain more than ___ of material retained on the No.4 sieve (4.75mm).

    15%

  • 11

    Aggregate base course will be measured by _________

    cubic meter

  • 12

    Permitted variation from design thickness of layer

    +/- 10mm

  • 13

    Permitted variation from design level of surface

    +5mm/-10mm

  • 14

    Permitted surface irregularity measured by 3m straight edge

    5mm

  • 15

    Permitted variation from design crossfall or camber

    +/- 0.2%

  • 16

    Permitted variation from design longitudinal grade over 25m in length

    +/- 0.1%