Refresher SPDI 1

9 questions • 2026-01-10
Anonymous
Report

Question

Standard for the Installation of Standpipe and Hose Systems

  • NFPA 14

  • NFPA 170

  • NFPA 54

  • NFPA 13

  • Skip

Question

The tensile strength of A53 pipes should be a minimum of 48,000 psi for ______________.

  • Grade D

  • Grade C

  • Grade B

  • Grade A

  • Skip

Question

The wetted perimeter and cross-sectional area of a channel is 5 m and 9 sq. m respectively. What is the hydraulic radius of the channel?

  • 0.56 m

  • 1.80 m

  • 1.27 m

  • 2.10 m

  • Skip

Question

A device that measures altitude, the distance of a point above sea level.

  • Altimeter

  • Hydrometer

  • Barometer

  • Hygrometer

  • Skip

Question

Every passage to an attic water heater shall have a solid continuous flooring not less than _________ in width.

  • 24 inches

  • 36 inches

  • 48 inches

  • 60 inches

  • Skip

Question

A rectangular channel with depth of 300 mm and a width of 450mm has average nail flow velocity of 0.8 m/sec and C = 55. Calculate the gradient.

  • 1:650 m is required

  • 1:750 m is required

  • 1:608 m is required

  • 1:708 m is required

  • Skip

Question

How does the safety feature of a service hot water system works?

  • Electrically

  • Manually

  • Mechanically

  • Automatically

  • Skip

Question

Joints between Lead pipe and Cast iron shall be made by means of _____________.

  • Soldering or Wiping

  • Welding

  • Bell or Hub & Spigot

  • Adaptor fitting

  • Skip

Question

When permitted by the DENR, which of the following is not a basis for determining the type of private sewage disposal system to be used?

  • Soil Porosity

  • Number of Occupants

  • Location

  • Ground Water Level

  • Skip

Refresher SPDI 1

TestMaker

Score

0 / 9

Correct rate

0%

Correct: 0

Incorrect: 0

Unanswered: 9

 
ankimaker.com

Question list

  • 1

    Standard for the Installation of Standpipe and Hose Systems

    NFPA 14

  • 2

    The tensile strength of A53 pipes should be a minimum of 48,000 psi for ______________.

    Grade A

  • 3

    The wetted perimeter and cross-sectional area of a channel is 5 m and 9 sq. m respectively. What is the hydraulic radius of the channel?

    1.80 m

  • 4

    A device that measures altitude, the distance of a point above sea level.

    Altimeter

  • 5

    Every passage to an attic water heater shall have a solid continuous flooring not less than _________ in width.

    24 inches

  • 6

    A rectangular channel with depth of 300 mm and a width of 450mm has average nail flow velocity of 0.8 m/sec and C = 55. Calculate the gradient.

    1:608 m is required

  • 7

    How does the safety feature of a service hot water system works?

    Automatically

  • 8

    Joints between Lead pipe and Cast iron shall be made by means of _____________.

    Soldering or Wiping

  • 9

    When permitted by the DENR, which of the following is not a basis for determining the type of private sewage disposal system to be used?

    Number of Occupants