Question
discovered x-rays on November 8, 1895
Question
where Roentgen worked at when he discovered X-rays
Question
observed through a partially evacuated glass.
Question
partially evacuated glass tube, FORERUNNER for modern fluorescent lamps and x-ray tubes at the time
Question
the plate where the X-ray went was coated with this
Question
called the glow of the barium photocyanide
Question
what roentgen originally called x-rays, X as the symbol for the unknown
Question
the date where Roentgen was able to report his experiment to the scientific community
Question
year when Roentgen produced the first medical x-ray image using his wife’s hand
Question
total time that Roentgen needed to discover almost all properties of X-ray
RPC M2
Score
0 / 10
Correct rate
0%
Correct: 0
Incorrect: 0
Unanswered: 10
Question list
1
discovered x-rays on November 8, 1895Wilhelm Conrad Roentgen
2
where Roentgen worked at when he discovered X-raysWurzburg University
3
observed through a partially evacuated glass.Cathode Rays
4
partially evacuated glass tube, FORERUNNER for modern fluorescent lamps and x-ray tubes at the timeCrookes tube
5
the plate where the X-ray went was coated with thisBarium Photocyanide
6
called the glow of the barium photocyanideFluoroscence
7
what roentgen originally called x-rays, X as the symbol for the unknownX-light
8
the date where Roentgen was able to report his experiment to the scientific communityDecember 1895
9
year when Roentgen produced the first medical x-ray image using his wife’s hand1896
10
total time that Roentgen needed to discover almost all properties of X-ray1 month
11
wife of Wilhelm Roentgen, first person to have her hand imagedAnna Bertha Ludwig
12
discovery of x-rays were?Accidental
13
on this date in the U.S, the first x-ray examination was conducted. observed at the physics laboratory of Dartmouth CollegeFebruary 1886
14
first patient, who broke his wrist, in the U.S. to have an x-ray procedure.Eddie McCarthy
15
developed the Fluoroscope and investigated the fluorescent properties of 1800 other materials and Zinc Cadmium Sulfide and Calcium Tungstate.Thomas A. Edison
16
experienced severe radiation burns and died in 1904, becoming the first x-ray fatality in the United States.Clarence Dally
17
3 Radiation InjuriesSkin Damage, Loss of hair, Anemia
18
uses a film or solid-state image receptor and an x-ray tube that can be moved in any direction which will provide a fixed image.Radiography
19
conducted with an x-ray tube located underneath the table and provides moving images on a television or a flat panel display.Fluoroscopy
20
uses a rotating x-ray source and detector array to provide fixed images that can be reconstructed in any planeComputed Tomography
21
demonstrated the use of intensifying screens in 1896. development of Intensifying Screens helped reduce exposure time.Michael Pupin
22
exposed two glass x-ray plates with the emulsion surfaces together, exposure time was halved and the image was enhanced which introduced the double emulsion filmCharles L. Leonard
23
were used instead of glass as WW1 began because of supplies getting interruptedFilm
24
apparent substitute than the glass plateCellulose Nitrate
25
A Boston Dentist INTRODUCED TWO DEVICES that REDUCE EXPOSURE OF PATIENTS to x-rays and thereby minimize the possibility of x-ray burns. RESTRICTING THE BEAM with a sheet of lead with a hole in the center called a diaphragm and inserting a leather or aluminum filter improved the diagnostic quality of radiographs. This paved the way for the adoption of COLLIMATION and FILTRATIONWilliam Rollins
26
Introduced the Interrupter less Transformer. SUBSTITUTE FOR STATIC MACHINES and INDUCTION COILS in use at the time. this transformer greatly exceeded the capabilities of the Crookes tube.H.C Snook
27
Introduced the hot-cathode tube or the Coolidge tube in 1913. Far superior than the Crookes tube. Allowed x-ray INTENSITY AND ENERGY to be selected separately and with great accuracy which was not available with gas-filled tubes. Coolidge tubes are used in x-ray tubes today.William D. Coolidge
28
light amplifier tube for fluoroscopyBelle Telephone Laboratories
29
Component of the x-ray imaging system rarely seen by the radiologic technologist. Contained in a protective housing.X-ray Tube
30
Stationary Grid (Glitterblende)Gustav Bucky Grid
31
Moving GridPotter-Bucky Grid
32
Most frequently used. Consists of two perpendicular sets of ceiling-mounted rails. Allows longitudinal and transverse travel of the x-ray tube. A telescoping structure attaches the x-ray tube housing to the rails.Ceiling Support System
33
A term used when the x-ray tube is centered above the examination table at the standard SIDPreferred Detent Position
34
Has a single column with rollers at each end. The x-ray tube slides up and down the column as the column rotates.Floor to Ceiling Support System
35
Often equipped in Interventional Radiology suites. Variations: L-Arm and U-arm The system is ceiling mounted and provides very flexible x-ray tube positioning.C-Arm Support System
36
- Guard against excessive radiation exposure, electric shock, and leakage radiation. - This also incorporates specially designed high-voltage receptacles to protect against accidental electric shock. - Provides MECHANICAL SUPPORT for the x-ray tube and protects it from damage caused by rough handling. - x-rays emitted through its window are useful beamsProtective Housing
37
special section of the x-ray tube to which x-rays are emitted through.Window
38
Acts as insulators against electric shock Thermal cushion for heat dissipationOil
39
activated so as the x-ray tube cannot be used until it cools downMicroswitch
40
Contains the components of the x-ray tube and creates an electronic vacuum tube. 30 to 50 cm long and 20 cm in diameter. Made of Pyrex glass (Enables the x-ray tube to withstand tremendous heat generated) Vacuum allows for more x-ray production and longer tube life.Glass Enclosure
41
can reduce electron flow, reduce x-rays produced, produce more heatPresence of gas in x-ray tube
42
contained controlled quantities of gasCrookes tube
43
vacuum tubes that has no gas insideCoolidge Tube
44
An improvement in x-ray tube design. As a glass tube ages, parts of the Tungsten target vaporizes and coat the inside of the enclosure.Metal Enclosure
45
causes alteration of the electrical properties of the tube, allowing tube current to stray and interact with the glass enclosure. Result: Arcing and Tube Failure. This also maintain a constant electric potential between the electrons of the tube current and the enclosure. Longer life and less likely to fail.Metal Enclosure
46
Negative side of the x-ray tube. Primary parts: Filament and Focusing CupCathode
47
Coil of wire through which an electric current is conducted causing it to glow and emit large quantity of heat. This emits electrons when it is fully heated. Size: 2mm in diameter; 1 or 2 cm in length Made of THORIATED TUNGSTENFilament
48
Provides higher rate for ejection of electrons from the filament (Thermionic Emission) Melting point of 3410 degrees Celsius (Thorium and Tungsten) Does not vaporize easily vaporizes over time and is deposited to the internal components causing arcing and lead to tube failureTungsten
49
Adding 1% to 2% of this to the tungsten enhances thermionic emission and prolongs tube lifeThorium
50
A metal shroud where the filament is embedded. Electron beam tends to spread out owing to electrostatic repulsion and miss the anode. This is negatively charged so that it electrostatically confines the electron beam to a small area of the anodeFocusing Cup
51
Positive side of the x-ray tube. This conducts electricity, radiates heat, and contains the target. Three functions of this are Electrical Conductor Mechanical Support for the target Thermal DissipatorAnode
52
two types of anodeStationary & Rotating
53
3 Common anode materials* Copper * Molybdenum * Graphite
54
Used dental x-ray imaging. Does not move when an x-ray exposure occurs. Tungsten Alloy embedded in the copperStationary Anode
55
Used in general purpose x-ray. Must be capable of producing high intensity x-ray beams in a short time. Allows electrons beam to interact with a much larger target area. Heat is not confined to a small area. 3400 rpm. 10,000 rpm for high capacity x-ray tubes.Rotating Anode
56
base of an anodeGraphite
57
target part of anodeTungsten-Rhenium Alloy
58
parts holding the target of the anodeMolybdenum
59
2 elements that have lower mass density than tungsten making the anode lighter and easier to rotateGraphite and Molybdenum
60
form of extremely localized corrosion that leads to the creation of small holes in the metalPitting (Bubbling)
61
Why a tungsten target?- High atomic number (74) - High thermal conductivity, efficient metal for dissipating the heat - A high melting point (3400 degrees Celsius) Can stand under high tube current without pitting or bubbling - High atomic number (74)
62
Powers the rotating anode. Works by electromagnetic induction.Induction Motor
63
Located outside of the glass envelope. Consists of series of electromagnets equally spaced around the neck of the tube. Can be a permanent magnet or an electromagnet. Sends pulses of energy to the rotor which makes it rotate in the anodeStator
64
Shaft inside the glass envelope. Made of copper and iron fabricated into one mass. Allows the anode target to rotate once electricity is supplied.Rotor