Question
X-ray film consists of transparent, blue-tinted base what?
Question
What does an emulsion covering both sides of an x-ray film compose of?
Question
Gelatin of an X-ray film emulsion consists of? SB, SC, SI
Question
Today, what is the base used for film?
Question
There are 4 types of film that are used in radiography DPNS
Question
film that is • Small, lightweight and packaged in cardboard/plastic holders. • Also used in radiographic badges to determine the amount of xe ray exposure technicians receive • People are allowed 5 rads/ rems per year.
Question
Putting emulsion on both sides of the base doubles the amount of radiation-sensitive silver halide, and thus increases the what of the film?
Question
The _____ _____ are thin enough so developing. fixing, and drying can be accomplished in a reasonable time.
Question
The _____ suspended in the gelatin on both sides of the base, that creates an image.
Question
The factors that must be considered when selecting a film and developing a radiographic technique. CTKR
P2
Score
0 / 10
Correct rate
0%
Correct: 0
Incorrect: 0
Unanswered: 10
Question list
1
X-ray film consists of transparent, blue-tinted base what?Cellulose Acetate w/ 3% Nitrocellulose
2
What does an emulsion covering both sides of an x-ray film compose of?Gelatin
3
Gelatin of an X-ray film emulsion consists of? SB, SC, SI- silver bromide, - silver chloride - silver lodide(halides)
4
Today, what is the base used for film?Polyester Plastic
5
There are 4 types of film that are used in radiography DPNS1. dental flim 2. Photofluorographic film 3. Non screen film 4, screen flim
6
film that is • Small, lightweight and packaged in cardboard/plastic holders. • Also used in radiographic badges to determine the amount of xe ray exposure technicians receive • People are allowed 5 rads/ rems per year.Dental film
7
Putting emulsion on both sides of the base doubles the amount of radiation-sensitive silver halide, and thus increases the what of the film?Film speed
8
The _____ _____ are thin enough so developing. fixing, and drying can be accomplished in a reasonable time.Emulsion Layers
9
The _____ suspended in the gelatin on both sides of the base, that creates an image.Silver
10
The factors that must be considered when selecting a film and developing a radiographic technique. CTKR1. Composition, shape, and size of the part being examined and, in some cases, its weight and location. 2. Type of radiation used, whether x-rays from an x-ray generator or gamma rays from a radioactive source 3. Kllovoltages avallable with the x-ray equipment or the intensity of the gamma radiation 4. Relative Importance of high radiographic detall or quick and economical results.
11
if High resolution and contrast sensitivity is of overall importance, a ____ and finer grained flim should be usedslower
12
What are the materials used for base of an x-ray film?Cellulose triacetate or polyester for support
13
an adhesive layer containing gelatin and solvents that bind emulsion and base,Substratum
14
- part of x-ray film that is made up of silver halide and gelatin - usually contains suspended particles like silver bromide or silver chloride suspended in gelatin.Emulsion
15
supports, separates, and protects the silver halide crystals.Gelatin
16
layer of x-ray film that is gelatin, protects emulsion from damage.Protective layer
17
this is suspended in gelatin and change their physical nature on exposure to lonizing rays like X-rays or gamma rays.Silver halide particles
18
Four types of X-ray films include FFFF- Film with single coating of emulsion layer - Film with double coating of emulsion layer - Film with Intensifying Screen - Film without Intensifying Screen
19
Films that can be differentiated based on the Emulsion coating BGR1. Blue light-sensitive emulsion coating. 2. Green light-sensitive emulsion coating (Orthochromatic) 3. Red light-sensitive emulsion coating (Panchromatic)
20
•Films that can be differentiated based on the Speed of the film SFU1. Standard speed film 2. Fast-speed film 3. Ultra-speed film
21
This technique is called a direct technique and can be used for multiple speeds and industrial and medical UsesMetal screens or no screens
22
can be used alone (non-screen film) in a light-proof container or more typically with intensifying screens (screen flim).X-ray film
23
exposed by the direct action of x-radiation. This type of film is manufactured to be more sensitive to lonizing radiation and requires greater exposures.Non-screen film
24
include less frequently utilized screens used for specific usage conditions.Special purpose films
25
- Thase are X-ray fims with a single-side coating instead of a dual-side coating and are used to photograph a screen on which an X-ray image has been formed - This screen is flourescent in nature and is sensitive to blue or blue-greon colored light emission.Fluorographic films
26
2 Special Purpose Films FX1. Fluorographic films 2. X-ray paper
27
Modern technology allows for rapid utilizing an X-ray paper. An _________ is used to carry out this process, and it uses developing agents within the emulsion to obtain prompt results. It can also be cost-effective as the price of the X-ray paper is low.Instant cycle processor unit
28
four image properties that affect the overall quality of the finished radiograph BCRDbrightness, contrast, recorded detail and distortion.
29
What are visibility properties? BC- Brightness - Contrast
30
2 Accuracy Properties SD- Spatial Resolution - Distortion
31
- Heart of the x-ray film - active component in which the image is formed and consists of many small silver halide crystals suspended in gelatin.Emulsion
32
The ______ of a particular film determines the amount of exposure required to produce an image.Sensitivity
33
film with a high sensitivity (speed) requires ____ exposure than a film with a lower sensifivity (speed).Less
34
sensitivity of film chosen when the reduction of patient exposure and heat loading of the x-ray equipment are important considentions.High sensitivity films
35
films that are used to reduce image noise.Low sensitivity (speed) films
36
The sensitivity of film is determined by a number of factors, What is it? DEH- design, - exposure conditions, - how it is processed.
37
An _______ in temperature speeds up the development process and increases film sensitivity because ______ exposure is required to produce a specific film density.- Increase - Less
38
The spectral sensitivity is a characteristic of film that must be taken into account in sclecting film for use with specific intensifying screens and cameras. True or FalseTrue
39
Film should be most sensitive to the color of the light that is emitted by the IICL- intensifying screens, - intensifier tubes, - cathode ray tubes, - lasers.
40
What will happen to the sensitivity if a blue sensitive film is used with a green emitting intensifying screen?Combination will have drastically REDUCED SENSITIVITY
41
Safelight safety should include SBLD- safelight color, - brightness, - location - duration of film exposure.
42
Therefore, the ______ & _____ of the safelight must be selected properly so as to minimize film exposure.brightness and distance
43
Silver bromide can be made sensitive te green light by adding _________ to the emulsion.sensitizing dyes
44
A single exposure step that produces a film density of about 1 density unit (above the base plus fog value) is selected and designated the?Speed step
45
Two other steps are selected, and the difference between them is used as a measure of film contrast. this is what?Contrast Index
46
Bending unprocessed film can produce ______ which can appear as either dark or light areas in the processed image.artifacts or "kink marks,"
47
Handling film, especially in a dry environment, can produce a build-up of ______ the discharge produces dark spots and streaks.static electricity
48
• Determine by the size of the silver halide crystals • Thickness of emulsion • Presence of radiosensitive dyesFilm Speed Sensitivity
49
-major factor determining speedSize/Large Ag Br Crystals (faster film)
50
• More sensitive film-lower mAgreater film speed
51
films that are small grain, better definition, more exposure timeSlow speed
52
FAST SPEED FILM - D (ultra speed) E (ekta) F (ultra ekta)MEMORIZE
53
Different densities between light and dark regions of radiographFilm Contrast
54
Speed of later generation?E
55
crystal size that results in -lower exposure time-poor definitionLarger crystals
56
It absorbs x ray and emit visible light which exposes screen filmIntensifying screen
57
is sensitive to UV and blue light (300-500 nm)Silver halide crystal
58
are coated with sensitizing dyes to increase absorptionGreen light-silver halide crystal
59
type of emission of Gadolinium oxysulfide, terblum activatedGreen emission
60
type of emission of ytrium, tantalite, niobium activatedBlue & UV emission
61
Latent Image Formation 1. ______ interaction releases electrons. 2. ______ migrate to the sensitivity center (contaminant in the ____ _____ crystal, usually silver ____) 3. At the sensitivity center, ____ ____ is formed by attracting an interstitial _____ _____---latent image center. 4. The process is repeated ____ ____ resulting in the build up of ____ ____. 5. The remaining silver halide is converted to _____ during processing.- Radiation - Electrons - Silver halide - Sulfide - Atomic silver - Silver ion - Many times - Silver atoms - Silver