Question
Have several causes, most of which are related to the thermal characteristics of the x-ray tube
Question
must be dissipated for the x-ray tube to continue to function.
Question
Three Methods of Heat Dissipation
Question
results in reduced tube life (also the first reason for tube failure)
Question
caused by excessive temperature of the anode
Question
what may result to cracking of the anode.
Question
should not be applied to a cold cathode.
Question
results from maintaining the anode at elevated temperatures for prolonged times.
Question
what’s the final cause of tube failure?
Question
caused when vaporized tungsten coats the inside of the glass or metal enclosure is interacted with electrons.
RPC F1
Score
0 / 10
Correct rate
0%
Correct: 0
Incorrect: 0
Unanswered: 10
Question list
1
Have several causes, most of which are related to the thermal characteristics of the x-ray tubeX-Ray Tube Failure
2
must be dissipated for the x-ray tube to continue to function.Heat
3
Three Methods of Heat DissipationRadiation - transfer of heat by emission of infrared radiation. Convection - transfer of heat by the movement of a heated substance from one place to another Conduction - transfer of heat from one area of an object to another.
4
results in reduced tube life (also the first reason for tube failure)Excessive heat
5
caused by excessive temperature of the anodeLocalized Surface Melting & Pitting
6
what may result to cracking of the anode.Too rapid increase in temperature of the anode
7
should not be applied to a cold cathode.Maximum radiographic technique
8
results from maintaining the anode at elevated temperatures for prolonged times.Second type of tube failure
9
what’s the final cause of tube failure?Tube Arcing
10
caused when vaporized tungsten coats the inside of the glass or metal enclosure is interacted with electrons.Tube Arcing
11
- causes disturbed electrical balance on the x-ray tube, - causing abrupt, intermittent changes in tube currentTube Arcing
12
guides the the radiologic technologists in using the x-ray tubeRating Chart
13
Three types of Rating charts- Radiographic Rating Chart - Anode Cooling Chart - Housing Cooling Chart
14
most important of the three types of rating chartsRadiographic Rating Chart
15
shows scales of mA and kVpX and Y
16
- contains the thermal capacity of the anode and its heat dissipation characteristics. - has a limited capacity in storing heat.Anode Cooling Chart
17
- has a shape similar to that of the anode cooling chart and is used precisely the same way. - complete cooling after maximum heat capacity requires from 1 to 2 hoursHousing Cooling Chart
18
- describes the energy deposition of a particular type of radiation, which largely determine the biological consequence of radiationLinear Energy Transfer
19
- proportional to the square of the charge of the particle. - inversely proportional to the particle's kinetic energy.Linear Energy Transfer
20
what is the unit of LETkeV/um
21
High Linear Energy Transfer Radiation range3-200 keV/um
22
Low Linear Energy Transfer Radiation0.2-3 keV/um
23
High Linear Energy Transfer is mediated by what?alpha particles, proton, neutrons
24
- Greater density of interactions at cellular level - produce biological damage in a given volume of tissueHigh Linear Energy Transfer
25
Low Linear Energy Transfer is mediated by what?Electrons, Positrons, Gamma rays, X-rays
26
less likely to produce tissue damage in the same volume of tissueLow Linear Energy Transfer
27
conveys which radiographic techniques are safe and unsafe for x-ray tube operationRadiographic Rating Charts
28
average energy deposited per unit path length along the track of an ionizing particleLinear Energy Transfer
29
LET of Linac X-rays (6-15 MeV)0.3 keV/um
30
LET of Beta Particle (1 MeV)0.3 keV/um
31
LET of Cobalt-60 Y-rays0.2 keV/um
32
LET of 250 kVp x-rays (standard)2 keV/um
33
LET of 150 MeV protons0.5 keV/um
34
LET of Neutrons0.5-100 keV/um
35
LET of Alpha Particles50-200 keV/um
36
LET of Carbon ions40-90 keV/um