Question
concerned with providing occupational radiation protection dose to the public
Question
scientist concerned with research and operational aspects of radiation safety
Question
Cardinal Principles of Radiation Protection KMI
Question
______: This is called when the time of exposure should be kept to a minimum ______: to reduce motion blur, one shot ______: to reduce patient & personnel exposure, moving images
Question
_____ _____ is inversely related to the distance between the source & the patient
Question
the intensity of radiation at a location is inversely proportional to the square of its distance
Question
what to do to greatly reduce the level of radiation exposure? composition (lead), protective apron 0.5 mm of ______, reduces occupational exposure to 25%
Question
thickness of absorber necessary to reduce radiation intensity to half its original value
Question
thickness of absorber necessary to reduce radiation intensity to one-tenth its original value
Question
contained within protective housing, reduces leakage radiation
RADPRO 1&2
Score
0 / 10
Correct rate
0%
Correct: 0
Incorrect: 0
Unanswered: 10
Question list
1
concerned with providing occupational radiation protection dose to the publicHealth Physics
2
scientist concerned with research and operational aspects of radiation safetyHealth Physicist
3
Cardinal Principles of Radiation Protection KMI- keep time of exposure as low as possible - maintain a large distance as possible between source of radiation - insert shielding material
4
______: This is called when the time of exposure should be kept to a minimum ______: to reduce motion blur, one shot ______: to reduce patient & personnel exposure, moving images> Minimize Time > Radiography > Fluoroscopy
5
_____ _____ is inversely related to the distance between the source & the patientRadiation dose
6
the intensity of radiation at a location is inversely proportional to the square of its distanceInverse Square Law
7
what to do to greatly reduce the level of radiation exposure? composition (lead), protective apron 0.5 mm of ______, reduces occupational exposure to 25%Use Shielding > Lead
8
thickness of absorber necessary to reduce radiation intensity to half its original valueHalf Value Layer
9
thickness of absorber necessary to reduce radiation intensity to one-tenth its original valueTenth Value Layer
10
contained within protective housing, reduces leakage radiationProtective X-ray Tube Housing
11
condition of exposure, must positively indicate when x-ray tube is energized, kVp & mA indicatorsControl Panel
12
collimators for special examinationCones & Diaphragm
13
- They must be adjusted so that with any image receptor size in use and at all standard SIDs, - no longer required by continue to be part of the most radiographic imaging systems.Positive Beam Limitation
14
Each radiographic tube should be provided with a mechanism Purpose is to ensure proper alignment of the x-ray beam & the IRBeam Alignment
15
the output radiation intensity should be constant from one exposure to another. This is checked by making repeated radiation exposures through the same technique and observing the average variation in radiation intensity.Reproducibility
16
When adjacent mA stations are used, for example, 100 mA and 200 mA, the exposure time is adjusted for constant mAs, the output radiation intensity should remain constant. When the exposure time remain constant, causing the mAs to increase in proportion to the increase in mA, radiation intensity should be proportional to mAs. Radiation Intensity: ___/____Linearity > mR/mAs
17
_______: it is when RT may be in the exposure room during exposure, but only if protective apparel is worn ______ ______: fixed, not a long cordOperator Shield > Exposure Control
18
These are parts of _______ ____: should be assigned ____: at least 2m from x-ray tube during exposureMobile X-ray Imaging System > Lead Apron > Exposure Switch
19
radiation from x-ray tubeLeakage Radiation
20
radiation from patientScatter Radiation
21
receives the imageImage Receptor
22
in charge of quality & contrastkVp
23
in charge of quantity and densitymAs
24
What do you call this? and what is the minimum? at least mm Al when above 70 kVp at least mm Al when 50-70 kVp at least mm Al when below 50 kVpFiltration 2.5mm Al 1.5mm Al 0.5mm Al