暗記メーカー

暗記メーカー

​
ログイン
6 Seam
30問 • 1年前
  • Gabriel Bionat
    • 通報

    問題一覧

  • 1

    Deadweight is defined as the weight carried onboard ship which sides

    ballast, fuel, fresh water, bunker

  • 2

    What is the basic data included in the GA plan?

    Class

  • 3

    What will be your basis when calculating the amount to load to bring the ship to the appropriate load line in sea water

    true mean draft at full Ioaded condition

  • 4

    It is the purpose of taking moments about the keel when loading or discharging of cargoes

    to find the final KG for loading, discharging several cargoes

  • 5

    Which is not included in the GA plan that depicts the division and arrangement of the ship

    cross section

  • 6

    It is the basis for the width and height measurements of cargo hold for bale capacity.

    inside the cargo battens and underside of the deck beams.

  • 7

    It is where the grain capacity of a cargo hold is measured with allowance for the volume occupied by the beams and frames.

    inside the shell plating and wooden ceiling to underside of the deck

  • 8

    It is the definition of Stowage Factor.

    the volume of cargo occupied by one metric ton of its weight

  • 9

    What is needed in order to calculate the number of tonnes a hold will contain?

    cubic capacity of cargo hold and stowage factor of cargo

  • 10

    What will you obtain if you have the weight of cargo and its stowage factor?

    the volume of cargo

  • 11

    It is the minimum length of ship that is required to carry an approved loading manual

    24m over

  • 12

    It is dependent on the underwater volume of the ship

    displacement

  • 13

    It is the main purpose of the loading manual

    If vessel complies with stability regulations

  • 14

    It is not included in the calculations performed by stability instrument

    calculations of fuel consumption

  • 15

    What is the indicator if any of the limitations of the ship is not complied?

    a "not complied" warning displayed on screen and print out without sound

  • 16

    It is the draft to be used when using the deadweight scale

    mean draft at amidship

  • 17

    A ship is floating on an even keel, what will happen to the draft aft if you load somewhere forward of the center of floatation?

    it will increase by bodily sinkage and decrease by change of trim

  • 18

    This happens when you move from higher density water to lower density water

    displacement will be the same while draft will increase

  • 19

    It is the information obtained from highest point of curve of statical stability.

    maximum GZ and angle of heel it will occur

  • 20

    This is one of the reasons why the ship "list"

    uneven movement of weights from the centerline

  • 21

    Which of the following number of ordinates is applicable to Simpson's First rule?

    5, 9, 13, 17, etc.

  • 22

    It is the difference of load displacement and the present displacement

    deadweight available

  • 23

    It is the increase in draft when a ship goes from salt water to fresh water and vice versa

    dock water allowance

  • 24

    It is the increase in draft when a ship goes from salt water to dock water and vice versa

    dock water allowance

  • 25

    It is the multiplier of Simpson's Rule number 1

    1, 4, 1

  • 26

    How do you calculate the displacement in dock water, given the displacement in salt water, while maintaining the salt water draft?

    displacement in salt water multiply by dock water density divided by salt water density

  • 27

    It is where fresh water allowance is applicable.

    when floating at summer or fresh water loadline

  • 28

    Which tan has the greatest free surface effect?

    length and width is the same, height one meter, half filled

  • 29

    Dividing the length of the tank in two will reduce the free surface effect by how may percent?

    0

  • 30

    Dividing the width of the tank in four will reduce the free surface effect by how many percent

    1/16

    • seam 2

    seam 2

    Gabriel Bionat · 30問 · 2年前

    seam 2

    seam 2

    30問 • 2年前
    Gabriel Bionat

    mar env

    mar env

    Gabriel Bionat · 64問 · 2年前

    mar env

    mar env

    64問 • 2年前
    Gabriel Bionat

    NAV 6

    NAV 6

    Gabriel Bionat · 48問 · 2年前

    NAV 6

    NAV 6

    48問 • 2年前
    Gabriel Bionat

    (Far)MGMTt

    (Far)MGMTt

    Gabriel Bionat · 40問 · 2年前

    (Far)MGMTt

    (Far)MGMTt

    40問 • 2年前
    Gabriel Bionat

    (Cele)Seam 5

    (Cele)Seam 5

    Gabriel Bionat · 40問 · 2年前

    (Cele)Seam 5

    (Cele)Seam 5

    40問 • 2年前
    Gabriel Bionat

    Marrlaw

    Marrlaw

    Gabriel Bionat · 39問 · 2年前

    Marrlaw

    Marrlaw

    39問 • 2年前
    Gabriel Bionat

    NAV 5 EXAM

    NAV 5 EXAM

    Gabriel Bionat · 40問 · 2年前

    NAV 5 EXAM

    NAV 5 EXAM

    40問 • 2年前
    Gabriel Bionat

    (Fern)Marlaw

    (Fern)Marlaw

    Gabriel Bionat · 44問 · 2年前

    (Fern)Marlaw

    (Fern)Marlaw

    44問 • 2年前
    Gabriel Bionat

    Nav 4

    Nav 4

    Gabriel Bionat · 28問 · 2年前

    Nav 4

    Nav 4

    28問 • 2年前
    Gabriel Bionat

    (Aba)OBT

    (Aba)OBT

    Gabriel Bionat · 35問 · 2年前

    (Aba)OBT

    (Aba)OBT

    35問 • 2年前
    Gabriel Bionat

    MARPOWER EXAM

    MARPOWER EXAM

    Gabriel Bionat · 71問 · 2年前

    MARPOWER EXAM

    MARPOWER EXAM

    71問 • 2年前
    Gabriel Bionat

    (Aba)Mar Envi

    (Aba)Mar Envi

    Gabriel Bionat · 35問 · 2年前

    (Aba)Mar Envi

    (Aba)Mar Envi

    35問 • 2年前
    Gabriel Bionat

    Marcom

    Marcom

    Gabriel Bionat · 47問 · 2年前

    Marcom

    Marcom

    47問 • 2年前
    Gabriel Bionat

    indigenous

    indigenous

    Gabriel Bionat · 46問 · 2年前

    indigenous

    indigenous

    46問 • 2年前
    Gabriel Bionat

    MGMT

    MGMT

    Gabriel Bionat · 34問 · 2年前

    MGMT

    MGMT

    34問 • 2年前
    Gabriel Bionat

    seam 22

    seam 22

    Gabriel Bionat · 23問 · 2年前

    seam 22

    seam 22

    23問 • 2年前
    Gabriel Bionat

    NAVI 6

    NAVI 6

    Gabriel Bionat · 59問 · 2年前

    NAVI 6

    NAVI 6

    59問 • 2年前
    Gabriel Bionat

    What

    What

    Gabriel Bionat · 35問 · 2年前

    What

    What

    35問 • 2年前
    Gabriel Bionat

    11

    11

    Gabriel Bionat · 57問 · 2年前

    11

    11

    57問 • 2年前
    Gabriel Bionat

    Capital - Asia

    Capital - Asia

    Gabriel Bionat · 49問 · 2年前

    Capital - Asia

    Capital - Asia

    49問 • 2年前
    Gabriel Bionat

    問題一覧

  • 1

    Deadweight is defined as the weight carried onboard ship which sides

    ballast, fuel, fresh water, bunker

  • 2

    What is the basic data included in the GA plan?

    Class

  • 3

    What will be your basis when calculating the amount to load to bring the ship to the appropriate load line in sea water

    true mean draft at full Ioaded condition

  • 4

    It is the purpose of taking moments about the keel when loading or discharging of cargoes

    to find the final KG for loading, discharging several cargoes

  • 5

    Which is not included in the GA plan that depicts the division and arrangement of the ship

    cross section

  • 6

    It is the basis for the width and height measurements of cargo hold for bale capacity.

    inside the cargo battens and underside of the deck beams.

  • 7

    It is where the grain capacity of a cargo hold is measured with allowance for the volume occupied by the beams and frames.

    inside the shell plating and wooden ceiling to underside of the deck

  • 8

    It is the definition of Stowage Factor.

    the volume of cargo occupied by one metric ton of its weight

  • 9

    What is needed in order to calculate the number of tonnes a hold will contain?

    cubic capacity of cargo hold and stowage factor of cargo

  • 10

    What will you obtain if you have the weight of cargo and its stowage factor?

    the volume of cargo

  • 11

    It is the minimum length of ship that is required to carry an approved loading manual

    24m over

  • 12

    It is dependent on the underwater volume of the ship

    displacement

  • 13

    It is the main purpose of the loading manual

    If vessel complies with stability regulations

  • 14

    It is not included in the calculations performed by stability instrument

    calculations of fuel consumption

  • 15

    What is the indicator if any of the limitations of the ship is not complied?

    a "not complied" warning displayed on screen and print out without sound

  • 16

    It is the draft to be used when using the deadweight scale

    mean draft at amidship

  • 17

    A ship is floating on an even keel, what will happen to the draft aft if you load somewhere forward of the center of floatation?

    it will increase by bodily sinkage and decrease by change of trim

  • 18

    This happens when you move from higher density water to lower density water

    displacement will be the same while draft will increase

  • 19

    It is the information obtained from highest point of curve of statical stability.

    maximum GZ and angle of heel it will occur

  • 20

    This is one of the reasons why the ship "list"

    uneven movement of weights from the centerline

  • 21

    Which of the following number of ordinates is applicable to Simpson's First rule?

    5, 9, 13, 17, etc.

  • 22

    It is the difference of load displacement and the present displacement

    deadweight available

  • 23

    It is the increase in draft when a ship goes from salt water to fresh water and vice versa

    dock water allowance

  • 24

    It is the increase in draft when a ship goes from salt water to dock water and vice versa

    dock water allowance

  • 25

    It is the multiplier of Simpson's Rule number 1

    1, 4, 1

  • 26

    How do you calculate the displacement in dock water, given the displacement in salt water, while maintaining the salt water draft?

    displacement in salt water multiply by dock water density divided by salt water density

  • 27

    It is where fresh water allowance is applicable.

    when floating at summer or fresh water loadline

  • 28

    Which tan has the greatest free surface effect?

    length and width is the same, height one meter, half filled

  • 29

    Dividing the length of the tank in two will reduce the free surface effect by how may percent?

    0

  • 30

    Dividing the width of the tank in four will reduce the free surface effect by how many percent

    1/16