hu | 暗記メーカー

hu

25問 • 1年前

問題一覧

How would you identify a type of ballast condition when the ship is heavily loaded, and the water ballast tanks are kept empty?

Light ballast

How is tank inspection interval done for the Water Ballast tanks of Tankers and Gas carriers?

At least once every 12 months

How is tank inspection interval done for the cargo holds of container ships ?

At least once every 30 months

What may be initiated at defects in welded joints and metal fittings to the coamings that will invite stress concentration?

Cracking

What part in the upper deck area is most liable to corrosion that when not paid attention will lead to water ingress in cargo holds, shifting of cargo and /or problem with the stability of the ships

Hatch cover

Which of the following details the specific guidelines about what to inspect during ship's 5 yearly cycle of statutory surveys of IACS with respect to hull and structure of bulk carriers and oil tankers?

Enhanced Survey Program

Which of the following is an annex that refers to the Guidelines on enhance survey programme of inspection during survey of oil tankers ?

Annex B

The Reporting and evaluation of surveys, acceptable and continued structural integrity, a condition evaluation report of the survey and results to be issued to the owner" falls on what Chapters of Annexes of Resolution A744(18) in 1994 SOLAS conference ?

The immediate and thorough repairs to damages and wastages falls on what chapters of Annexes of resolution A744(18) in 1994 SOLAS conference ?

Chap. 6

On bulk carriers of 100,000 tons deadweight and above, what survey is to be performed by the two ACS surveyors ?

Intermediate survey

What survey may be commenced at the fourth annual survey and be progressed during the succeeding year with a view to completion by the fifth-anniversary date ?

Renewal survey

which of the following is the segments in the preparation of the damage report were the surveys guarantee that the survey was meant to his knowledge and imphasizes that his work was carried out without

Ending

Prior to opening or closing a hatch, who should you informed after the hydraulic system has been topped up?

Chief engineer / watch officer

Which is not a test for weathertightness of hatch covers?

Chalk test

What should the hatch cover be made first before it becomes watertight?

Weathertight

What are fitted at the forward and after part of the lower hold leading to double bottom spaces?

Manholes

What are fitted on the port and starboard sides of the lower hold and ‘tween decks of the cargo spaces of a general cargo ship?

Timber sweat battens

Which of the following is the best time for carrying out a cargo space inspection?

The cargo have been discharged and the cargo space have been cleaned.

Which of the following is/are the cause/s of damages sustained by ship’s structural parts and equipment?

Improper handling of equipment used during cargo operations

hydro carbon gas air mixture usually giving the result and percentage lower explosively limit or lower flammable limit

Combustible gas indicator

Which of the following shall you display at the entrance of the enclosed space to be entered?

A copy of the permit to work

An oxygen indicator or analyzer is an instrument used to determine if there is________________.

sufficient oxygen in an enclosed space to support life

During the designing and construction stages of a ship, which of the following are introduce at various locations for maintaining the stability of the ship during the sea voyage ?

Ballast tank

Which of the following does not belong to the purposes of ballasting operations of ship?

Ballasting helps in increasing ship's stresses on the hull and does not provides for transverse stability

Many ports around the world have a restriction for usage of ballast water. What type of ballast condition would it be when these ballast water are provided to correct the trim and list of the ship during loading or discharging operation ?

Port ballast

seam 2

Gabriel Bionat · 30問 · 2年前

seam 2