MAINTENANCE FORMS AND RECORDS

36問 • 1年前

問題一覧

For aircraft operated under part 91, which of the following records must be retained for at least one year, or until the work is repeated or superseded?

Records of maintenance, alterations, preventive maintenance, 100-hour, annual and progressive inspections

Which of the following may a certificated airframe and powerplant mechanic perform on aircraft and approve for return to service? 1. A 100-hour inspection 2. An annual inspection, under specified circumstances 3. A progressive inspection, under specified circumstances

1,3

If work performed on an aircraft has been done satisfactorily, the signature of an authorized person on the maintenance records for maintenance or alterations performed constitutes

Approval for return to service only for the work performed

Which aircraft record entry is the best description of the replacement of several damaged heli-coils in a casting?

Eight ¼--20 inch standard heli-coils were replaced. The damaged inserts were extracted , the tapped holes gaged, then new inserts installed, and tangs removed

What is the means by which the FAA notifies aircraft owners and other interested persons of unsafe conditions and prescribes the condition under which the product may continue to be operated? a

Airworthiness Directives

Which maintenance record entry best describes the action taken for a .125-inch deep dent in a straight section of 1/2 –inch aluminum alloy tubing?

Dented section removed and replaced with identical new tubing flared to 37°

Which is an appliance major repair?

Overhaul of a hydraulic pressure pump

When approving for return to service after a maintenance or alteration, the approving person must enter in the maintenance record of the aircraft

A description (or reference of acceptable data) of work performed, date of completion, the name of the person performing the work (if someone else) , signature, certificate number and kind of certificate held

Who is responsible for upkeep of the work required maintenance record of an aircraft?

The aircraft owner

Which is statement is true regarding the requirements for maintenance record format?

Any format that provides record continuity and includes the required information may be used

Where should you find this entry? ‘Removed right wing from aircraft and remove skin from outer 6 feet. Repaired buckled spar 49 inches and in figure 8 in the manufacturer’s structural repair manual No. 28-1.’

FAA Form 337

When a 100-hour inspection is completed, if separate maintenance records for the airframe, powerplant(s), and propeller(s) are maintained, where is the entry for the inspection recorded?

In each record

When work is performed on an aircraft that necessitates the use of FAA Form 337, who should prepare the form?

The person who performs or supervises the work

A certificated mechanic without an inspection authorization who signs the appropriate block on FAA Form 337 is doing what?

Certifying that he work was done in accordance with the requirements of 14CFR Part 43

For the aircraft operated under part 91, what difference is there, if any, between the record entry requirements for maintenance (e.g., repair or alteration) and the record entry requirements for inspections (beyond the description of the work performed and the type and extent of inspection?

Aircraft total time is required to be included only in the inspection entry

What is the status of data used as a basis of approving major repairs or alternations for returning to service?

Data must be FAA-approved prior to its use for that purpose.

Where is the record of compliance with Airworthiness Directives or manufacturer’s service bulletins normally indicated?

Aircraft maintenance record

If more spaces is needed for a work description entered o FAA Form 337, what information should be included on the attached sheet (s), in addition to the rest of the work description?

Aircraft nationality and registration mark, and the date the work was accomplished

After making a certain repair to an aircraft engine that is to be returned to service, an FAA Form 337 is prepared. How many copies are required and what is the disposition of the completed forms?

Two; one copy for the aircraft owner and one copy for the FAA

An aircraft owner was provided a list of discrepancies on an aircraft that was not approved for return to service after an annual inspection. Which of the following statements is/are true concerning who may correct the discrepancies? 1. Only a mechanic with an inspection authorization 2. An appropriately rated mechanic 3. Any certified repair station

Which aircraft record entry best describes repair of a dent in a tubular steel structure dented at a cluster?

Welded a reinforcing plate over the dented area

During an annual inspection, if a defect is found which makes the aircraft unairworthy, the person disapproving must

Provide a written notice of the defect to the owner

When a discrepancy list is provided to an aircraft owner or operator after an inspection, it says in effect that

Except for these discrepancies, the item inspected is airworthy

For aircraft operated under part 91, when is aircraft total time is required to be recorded in aircraft maintenance records?

After satisfactorily completing inspections

For aircraft operated under part 91, which of the following records must be retained and transferred with the aircraft when it is sold?

Records of the current status of applicable AD’s, and date and time when recurring AD’s are next due

Which statement is true regarding the use of FAA Form 337?

FAA Form 337 is not authorized for use with other U.S. registered aircraft

An FAA form 337 is used to record and document

Major repairs and major alterations.

What is /are the appropriate action (s) concerning minor repairs performed on a certificated aircraft? 1. FAA form 337’s must be completed 2. Entries must be made in the aircraft maintenance record. 3. The owner of the aircraft must submit a record of all minor repairs to the FAA at least annualy.

A person installing a product , part, or appliance on a type certificated product must make certain that the item’s records document what type of statement?

The product, part, or materials meets FAA airworthiness standards.

After a mechanic holding an airframe an powerplant rating completes a 100-hour inspection, what action is required before the aircraft is returned to service?

Make the proper entries in the aircraft’s maintenance record.

Which maintenance action is an airframe major repair?

The repair of portions of skin sheets by making additional seams.

Which maintenance record entry best describes the action taken for a control cable showing approximately 20 percent wear on several of the individual outer wires at a fairlead?

Wear within acceptable limits, repair not necessary.

Who is responsible for making the entry in the maintenance records after an annual, 100 hour, or progressive inspection?

The person approving or disapproving for return so service.

An aircraft was not approved for return to service after an annual inspection and the owner wanted to fly the aircraft to another maintenance base. Which statement is correct?

The owner must obtain a special flight permit.

In order to reconstruct lost or destroyed aircraft maintenance records, what is it necessary to establish?

Total time-in-service of the airframe.

Each person performing an annual or 100-hour inspection shall use a checklist that contains at least those items in the appendix of

14CFR Part 43.

airlaw

ユーザ名非公開 · 119問 · 1年前

airlaw