maintenance publications

38問 • 2年前

問題一覧

1. propellers are not included in the airworthyness directive system. 2. a certificated powerplant mechanic may make a minor repair on an aluminum propeller and approve for return to service

2 is true

1 the federal aviation regulation require approval after compliance with the data of a supplemental type certificate 2 an installation of an item manufactured in accordance with the technical standard order system requires no further approval for installation in a particular aircraft

1 is true

type certificate data sheets are issued for which of the following products

aircraft, engines and propellers

where are technical descriptions of certified propellers found

propeller type certificate data sheet

1 manufacturer’s data and faa publications such as airworthiness directives, type certificate data sheets, and advisory circulars are all approved data 2 faa publications such as technical standard orders, airworthiness directives, type certificates are all approved data

2 is true

the following is a table of airspeed limits as given in an faa-issued aircraft specification: normal-exceed speed 293 knots maximum landing gear operation speed 174 knots maximum flap extended speed 139 knots the high end of the white arc on the airspeed instrument would be at

139 knots

which regulation provides the airworthiness standards for an airplane certificated in the normal category?

14 cfr part 23

placards required on an aircraft are specified in

aircraft specidications or type certificate data sheets

aviation maintenance alerts (formerly general aviation airworthiness alerts)

provide information about aircraft problems and suggested corrective system

what is the maintenance recording responsibility of the person who complies with an air worthiness directive?

make an entry in the maintenanace record of that equipment

primary responsibility for compliance with airworthiness directives lies with the

aircraft owner or operator

a technical standard order (tso) is issued by whom?

the administrator

check thrust bearing nuts for tightness on new or newly overhauled engines at the first 50-hour inspection following installation. subsequent inspections on thrust bearing nuts will be made at each third 50-hour inspection

150 hours

a complete detailed inspection and adjustment of the valve mechanism will be made at the first 25 hours after the engine has been placed in service. subsequent inspections of the valve mechanism will be made each 50-hour period.

100 hour

how long are ad compliance records required to be kept?

they shall be retained, and then transferred with the aircraft when it is sold

what does the type certificate data designation code ‘2pcsm’ mean

two place(number of seats), closed, sea, monoplane

sutability for the use of a specific propeller with a particular engine-airplane combination can be determined by reference to what informational source?

aircraft specifications or aircraft type certificate data sheet.

an aircraft type certificate data sheet contains

location of the datum

the air transport association of america (ata) specification no. 100 1 establishes a standard for the presentation of technical data in maintenanace manuals. 2 divides the aircraft into numbered systems and simplify locating maintenanace instructions.

both true

which of the following includes all the regulatory definitions of maintenanace?

overhaul, repair, parts replacement, inspection, and preservation

1 a supplimental type certificate may be issued to more than one applicant for the same design change, providing each applicant shows compliance with the applicable airworthiness requirement. 2 an installation of an item manufactured in accordance with the technical standard order system requires no further approval for installation in a particular aircraft

1 is true

what is the maximun penalty for cheating or other unauthorized conduct when taking an faa mechanic test?

ineligibility to receive any certificate or rating for one year, and suspention or revocation of any certificate held

which regulation provides information regarding instrument range markings for an airplane certified in the normal category?

14 cfr part 23

what information is generally contained in aircraft specifications or type certificate data sheets?

control surface movements

the action required by an ad may take what from 1 inspection 2 parts replacement 3 design modification 4 change in operating procedure 5 overall chage in the content , firm and disposition of the aircraft maintenance records

1,2,3 and/or 4

airworthiness directives are issued primarily to

correct an unsafe condition

specifications pertaining to an. aircraft model manufactured under a type certificate, of which less than 50 are shown on the faa aircraft registry, can be found in the

aircraft listing

the following words are example of what kind of statement in an ad? ‘required within the next 25 hours time-in-service after the effective date of this ad, unless already accomplished

compliance

under the federal aviation regulations, an aviation maintenance technician is required to perform maintenanace on an aircraft so that it

is at least equal to its original or properly altered condition

when is a mechanic reponsible for checking ad compliance?

when performing an inspection required under part 91, 125, or 135

when information is generally contained in aircraft specifications or type certificate data sheets?

control surface movements

the issueance of an airworthiness certificate is governed by

14 cfr part 21

an aircraft mechanic is privileged to perform major alterations on u.s certified aircraft; however, the work must be done in accordance with faa-aproved technical data before the aircraft can be returned to service. which is not approved data

ac 43. 13-2a

technical information about older aircraft models, of which no more than 50 remain in service, can be found in the

aircraft listing

where are technical descriptions of certificated propellers found?

propeller type certificate data sheets

the air transport assosiation of america (ata) specification no. 100 1 establishes a standard for the representation of technical data in maintenanace manuals 2 divedes the aircraft into numbered systems and subsystems in order to symplify locating maintenanace instructions

1,2 true

which of the following are sometimes used as authorization to deviate from an aircraft’s original type design? 1 faa form 337 2 supplemental type certificate 3 airworthiness directives 4 technical standard order a. 1,2,3 and 4

1,2 and 3

when an airworthy (at the time of sale) aircraft is sold, the airworthiness certificate

is transferred with the aircraft

airlaw and airworthyness

ユーザ名非公開 · 12問 · 2年前

airlaw and airworthyness