ログイン

NDT test 4
11問 • 2年前
  • Zachary Halycz
  • 通報

    問題一覧

  • 1

    What are the 6 Basic steps of Liquid Penetrant Inspection?

    1. pre clean 2. apply penetrant 3. remove penetrant 4. apply developer 5. inspect 6. post clean

  • 2

    why is the drying step not included in the 6 basic steps?

    it’s dependant on “type of developer used”

  • 3

    most important step of “6 basic steps”?

    pre-cleaning

  • 4

    is abrasive cleaning permitted? why or why not?

    NEVER •will peen surface, plug defects with sand blast

  • 5

    how can a penetrant be applied?

    1. dipped 2. spray 3. brush 4. flow on 5. drain dwell “drain in rack during dwell” 6. immersion dwell “part left submersed in penetrant”

  • 6

    if too much penetrant is left on the part after the removal of excess penetrant, what is this called?

    background or noise

  • 7

    what is the length of time a penetrant stays on a part called?

    dwell time

  • 8

    if you place a test piece in the tank, totally submerging it for dwell time, what is this called?

    immersion dwell

  • 9

    what are the parameters of the water rinse?

    1. temp 2. pressure 3. distance 4. angle 5. water 6. excess penetrant removed

  • 10

    can an emulsifier be brushed on a test piece? why or why not?

    NEVER brush emulsifier on penetrant •uneven application & can’t control time

  • 11

    What is it called when you MUST allow your eyes to adjust to low level lighting when doing inspection using fluorescent dye in darkened area?

    eye adaptation

  • Composites test 2

    Composites test 2

    Zachary Halycz · 54問 · 2年前

    Composites test 2

    Composites test 2

    54問 • 2年前
    Zachary Halycz

    Systems test 2, 2023

    Systems test 2, 2023

    Zachary Halycz · 49問 · 2年前

    Systems test 2, 2023

    Systems test 2, 2023

    49問 • 2年前
    Zachary Halycz

    History test 1

    History test 1

    Zachary Halycz · 52問 · 2年前

    History test 1

    History test 1

    52問 • 2年前
    Zachary Halycz

    Composites and material test 1

    Composites and material test 1

    Zachary Halycz · 41問 · 2年前

    Composites and material test 1

    Composites and material test 1

    41問 • 2年前
    Zachary Halycz

    Systems test 2, 2023

    Systems test 2, 2023

    Zachary Halycz · 49問 · 2年前

    Systems test 2, 2023

    Systems test 2, 2023

    49問 • 2年前
    Zachary Halycz

    Electricity test 2

    Electricity test 2

    Zachary Halycz · 35問 · 2年前

    Electricity test 2

    Electricity test 2

    35問 • 2年前
    Zachary Halycz

    Engines test 1 good copy

    Engines test 1 good copy

    Zachary Halycz · 45問 · 2年前

    Engines test 1 good copy

    Engines test 1 good copy

    45問 • 2年前
    Zachary Halycz

    Composites test 2

    Composites test 2

    Zachary Halycz · 63問 · 2年前

    Composites test 2

    Composites test 2

    63問 • 2年前
    Zachary Halycz

    Engines test 2

    Engines test 2

    Zachary Halycz · 56問 · 2年前

    Engines test 2

    Engines test 2

    56問 • 2年前
    Zachary Halycz

    Basic systems, sem 2, test 1

    Basic systems, sem 2, test 1

    Zachary Halycz · 61問 · 2年前

    Basic systems, sem 2, test 1

    Basic systems, sem 2, test 1

    61問 • 2年前
    Zachary Halycz

    History test 1

    History test 1

    Zachary Halycz · 52問 · 2年前

    History test 1

    History test 1

    52問 • 2年前
    Zachary Halycz

    Electricity test 2

    Electricity test 2

    Zachary Halycz · 35問 · 2年前

    Electricity test 2

    Electricity test 2

    35問 • 2年前
    Zachary Halycz

    Composites test 2

    Composites test 2

    Zachary Halycz · 54問 · 2年前

    Composites test 2

    Composites test 2

    54問 • 2年前
    Zachary Halycz

    Engines test 2

    Engines test 2

    Zachary Halycz · 60問 · 2年前

    Engines test 2

    Engines test 2

    60問 • 2年前
    Zachary Halycz

    Engines test 1 good copy

    Engines test 1 good copy

    Zachary Halycz · 41問 · 2年前

    Engines test 1 good copy

    Engines test 1 good copy

    41問 • 2年前
    Zachary Halycz

    Structures sem 2, test 1

    Structures sem 2, test 1

    Zachary Halycz · 50問 · 2年前

    Structures sem 2, test 1

    Structures sem 2, test 1

    50問 • 2年前
    Zachary Halycz

    Basic systems test 4 final

    Basic systems test 4 final

    Zachary Halycz · 17問 · 3年前

    Basic systems test 4 final

    Basic systems test 4 final

    17問 • 3年前
    Zachary Halycz

    Basic systems, sem 2, test 1

    Basic systems, sem 2, test 1

    Zachary Halycz · 67問 · 2年前

    Basic systems, sem 2, test 1

    Basic systems, sem 2, test 1

    67問 • 2年前
    Zachary Halycz

    Electricity sem 2, test 1

    Electricity sem 2, test 1

    Zachary Halycz · 31問 · 2年前

    Electricity sem 2, test 1

    Electricity sem 2, test 1

    31問 • 2年前
    Zachary Halycz

    Structures test 2, memorization

    Structures test 2, memorization

    Zachary Halycz · 11問 · 2年前

    Structures test 2, memorization

    Structures test 2, memorization

    11問 • 2年前
    Zachary Halycz

    問題一覧

  • 1

    What are the 6 Basic steps of Liquid Penetrant Inspection?

    1. pre clean 2. apply penetrant 3. remove penetrant 4. apply developer 5. inspect 6. post clean

  • 2

    why is the drying step not included in the 6 basic steps?

    it’s dependant on “type of developer used”

  • 3

    most important step of “6 basic steps”?

    pre-cleaning

  • 4

    is abrasive cleaning permitted? why or why not?

    NEVER •will peen surface, plug defects with sand blast

  • 5

    how can a penetrant be applied?

    1. dipped 2. spray 3. brush 4. flow on 5. drain dwell “drain in rack during dwell” 6. immersion dwell “part left submersed in penetrant”

  • 6

    if too much penetrant is left on the part after the removal of excess penetrant, what is this called?

    background or noise

  • 7

    what is the length of time a penetrant stays on a part called?

    dwell time

  • 8

    if you place a test piece in the tank, totally submerging it for dwell time, what is this called?

    immersion dwell

  • 9

    what are the parameters of the water rinse?

    1. temp 2. pressure 3. distance 4. angle 5. water 6. excess penetrant removed

  • 10

    can an emulsifier be brushed on a test piece? why or why not?

    NEVER brush emulsifier on penetrant •uneven application & can’t control time

  • 11

    What is it called when you MUST allow your eyes to adjust to low level lighting when doing inspection using fluorescent dye in darkened area?

    eye adaptation