forklift

67問 • 1年前

장하나

通報

問題一覧

How many days do you have after passing your assessment to apply for your High-Risk Work Licence?

60 days

What do you have to do if your HRW licence has not be renewed within 12 months of its expiry?

Retrain and sit an assessment with a Registered Training Organisation as you cannot renew.

Do you have to renew your HRW licence?

yes

How often do you have to renew your HRW licence?

every 5 years and online at WH&SQ website

Pre-Operational Checks(walk around) are required to be carried out on a forklift truck before getting on to operate, list 9?

No Visible Damage, Forks or attachments, Under machine for oil leaks, Mast, Hydraulic rams, Hoses, Data plate, Oils, Battery

What is meant by LCD?

The distance from the heel to centre of gravity.

Post Start Up Checks - List 6 checks you conduct after your seat belt is on and the engine is started.

Gauges, Lights, Horn, Reverse Beeper, Steering, Brakes

On conducting a pre-start check you find the data plate is missing or unreadable, what should you do?

Stop, Tag, Report

List 5 checks you should do on tyres and wheels on a forklift.

Air pressure is not correct., Tyres not worn down below the wear indicaror., Tyres not securely fitted to rims., No chunks missing from the rubber tyres., Tyre wear is uneven.

List 3 guards fitted to a forklift, and what do they protect.

Overhead guard - Protects the operator from falling objects, Foot guard - Protects the feet, Load guard - Stops the load from hitting the mast and protects the operator

Why is it unsafe to refuel while the engine is running?

Fuel could ignite / cause a fire

Keeping air filled tyres at correct operating pressure is important, why is this so?

Maintain stability and safety of forklift

If your view is obstructed while driving the forklift, what are 4 things you could do before you move?

Check pathway is clear, Travel in reverse, Use a spotter, Restack Load

Why should the load movement be watched when moving the forklift?

Stability of load and safety to people

Why is it unsafe to turn a forklift on a ramp or sloping surface?

Could result in the forklift tipping over, Losing the load

Explain what a hazard is

A thing or situation with potential to cause harm or damage

Explain what a risk is

The chance of a hazard causing harm or damage

What 3 penalties can the Workplace Health&Safety regulator apply if you fail to work safely when doing High Risk Work?

Licence suspended, Licence cancelled, Refusal to renew licence

List 12 site hazards you need to consider and plan for in the workplace before starting forklift operations.

Power lines, Trees, Overhead services, Awnings, Roller doors, Bridges, Buildings, Vehicles, Plant&equipment, Pedestrians, Ground conditions, Poor lighting

List 3 things that an employer must do to ensure the health and safety of all emplyees.

Provide safe plant and equipment, Provide safe systems of work, Provide adequate facilities

List 4 workplace safety information documents that you can obtain.

Code of Practice, Australian Standards, Regulations, Legislation

List 3 people you would discuss with about workplace hazards before you start work and explain why.

Other workers, Supervisor, Safety officer, So you know workplace Policies and Procedures

Before commencing work, what are 8 things you need to consider and plan for other than previously stated site hazards when planning the task?

Permits, Location, Access, Communication, Egress, Skills, PPE, Licences

When carrying out HRW as an employee/worker, you have a legislated Duty of Care. List 4 responsibilities that this implies.

Make sure of your own health, Don't put others in danger, Keep yourself safe, Comply with relevant WHS regulations

Having just completed a course and obtained you HRW forklift licence, list 4 things your employer must provide to you before operating unfamiliar equipment.

Supervision, Information, Instruction, Training

What are the minimum safe distances you must maintain when working on a forklift near power lines in QLD? Up to 132,000

What are the minimum safe distances you must maintain when working on a forklift near power lines in QLD? Between 132,000 and 330,000 volts

What are the minimum safe distances you must maintain when working on a forklift near power lines in QLD? Above 330,000 volts

How do you find out the voltage of overhead electric power lines?

Check with the local electrical authority

List 5 visual indicators used to identify power lines.

Tiger Tails, Maker balls, Warning/Danger Signs, Coloured markers, Painted power poles

List 5 steps you should take if the forklift you are operating comes in contact with electric power lines.

Warn - others to stay clear, Break - contact with lines, Stay - in the machine if it's safe, if you must leave the machine jump clear without touching the forklift and shuffle up to 8 meters away, Report - to an authorised person, Check - before re-using

When can passengers ride on a forklift?

Only if it has been designed with a seat to carry more than one person

List 6 safety control measures that can be used to protect pedestrians, other workers, vehicles or mobile plant.

Stop/Go person, Hazard lights, Signs, Barriers, Exclusion zones, Traffic management plan

What equipment is required to operate a forklift in dark or at night?

Adequate lighting

What are 4 ways you can communicate with other workers on site?

Verbal, Written, Signs, Hand signals

If a co-worker gives you a signal which is not clear to you, what should you do?

Stop and seek clarification

How can finding out weather forecasts help to plan tasks, especially in relation to outside work?

Prepare for suitable risk controls, Plan the work environment, Schedule work activities

List 4 weather-related hazards that can impact forklift operations.

Heat, Smoke, Snow and or ice, Slippery

When operating a forklift on a wet or slippery surface, what are 2 ways you can operate safely and stay safe?

Reduce Speed, No hard breaking

Raising or lowering a load near or over people is not allowed, why?

There is a risk of injury or death

Internal combustion engines(petrol, gas, diesel) produce dangerous gases(carbon monoxide). Why don't we use them in restricted spaces? And what type of forklift do you use in restricted spaces with minimal airflow?

The fumes could kill, electric

When charging batteries, why should they be charged in well-ventilated areas?

Batteries give off dangerous gases and could explode

When using the forklift why is "rear end" swing dangerous? Rapid sideways movement :

Can cause injury to persons or damage to property

If you need to move a load up or down a ramp, what direction must the load face?

Uphill

If the forklift starts to roll over sideways, what 2 things should you do?

Remain in the forklift, Brace yourself until stationary

What are 8 actions that may caused a forklift truck to tip over sideways?

Unsafe speed and turning, Uneven surfaces, Uneven load, Flat tyre, Driving too fast, Turning with load to high, Side shift not centred, Turning on a slope

List 8 actions that might cause a forklift truck to tip over frontwards or backwards when moving.

Overloaded, Hard braking, Mast tilted forward, Load not hard against heel of fork arm, Driving too fast, Forward down a slope, Uneven surfaces, Mast to high going through opening or doorway

What important role does the seatbelt perform on a forklift?

It will stop you from falling out

To maintain stability of the forklift and the load, a side-shift attachment should always be ( ) before travelling with a load.

Centre

When moving a forklift with or without a load, what is a 'safe' height to carry the load at?

At axel height or as slow as possible

Operating a forklift with a load raised in a straight line or turning is dangerous, why?

Height can reduce stability

Carrying a load on only one fork arm is unsafe, why?

Stability may be reduced, May damage the forklift, May lose the load

If the load is not fully against the heel of the fork arm, how will this affect the operation of the forklift?

Stability and capacity is reduced

List 4 ways the weight of a load can found out?

Consignment note or weighbridge docket, Weighing the load with scales, Calculate the weight, Markings may appear on the load

What is the most common load centre on forklifts in Australia?

600mm

What is the name of the steel structure supplied for the gap between a truck and a loading dock? These MUST be secured.

Dock plates, Bridge plates

Where would you look to find the forklift and attachment rated capacity?

Data plate

How would you find out the correct way of fitting any attachment to a forklift?

Manufacturer's instructions

List 5 attachments that can be used on a forklift... other than tynes.

Carpet Spike, Jib, Work Platform, Fork extensions, Drum Clamp

What effects does a jib attachment have on a forklift? Give 4 effects.

Reduced load capacity, Increase Centre of Gravity(COG), Swinging load, Reduced stability

What could the effects on a forklift be after adding any attachment? Give 2.

Capacity of the forklift will be reduced, Load Centre Distance(LCD) may increase

What do you look for when stacking loads on top of each other?

Firm Level Surface, Heavy and or Liquid goods at the bottom, High loads may be unstable

The point of balance(fulcrum) is where on a forklift?

Centre of the front wheels where the tyre touches the ground and pivots from

List 4 things you would do if the forklift you are operating breaks down in any way.

Stop operating, Lower forks to the ground(if possible), Tag out, Report to an authorised person and repair before re-using

Where is it unsafe to park a forklift in a workplace. Provide 7 areas.

Doorways, Fire-fighting equipment, On sloping surface, First aid stations, Walkways, Emergency exits, Railway crossings

What is the 'normal' parking procedure of a forklift?

Lower fork arms onto the ground, Park brake applied, Select neutral, Remove key

When leaving the forklift why should you remove the ignition key?

To prevent unauthorised use

would

would

could

could

should

should

have p.p 1

have p.p 1

have p.p 2

have p.p 2

have p.p 3

have p.p 3

구동사 1

구동사 1

구동사 2

구동사 2

구동사 3

구동사 3

부사

부사

일상생활