問題
The PATTERN OF INTERCONNECTION of nodes in a network is called the —.
問題
TOPOLOGY also determines the MANNER in which — within the network.
問題
- POPULAR topology for DATA NETWORK
問題
- IN BUS TOPOLOGY, normally — is used.
問題
- Single transmission medium onto which VARIOUS NODES ARE ATTACHED.
問題
- — at both end of BUS ABSORB SIGNAL, removing it from BUS.
問題
The — connects nodes over a network using a CENTRAL CONTROL UNIT called the —
問題
You can easily add nodes to a — by ATTACHING the REQUIRED NODES to the HUB.
問題
Setting up a — requires a LOT OF CABLING because all the nodes have to connect to the hub.
問題
The — connects the nodes on a network through a POINT-TO-POINT CONNECTION.
TOPOLOGY
得点
0 / 10
正答率
0%
正解: 0
不正解: 0
未解答: 10
問題一覧
1
The PATTERN OF INTERCONNECTION of nodes in a network is called the —.Topology
2
TOPOLOGY also determines the MANNER in which — within the network.information is exchanged
3
- POPULAR topology for DATA NETWORKBus Topology
4
- IN BUS TOPOLOGY, normally — is used.coaxial cable
5
- Single transmission medium onto which VARIOUS NODES ARE ATTACHED.Bus Topology
6
- — at both end of BUS ABSORB SIGNAL, removing it from BUS.Terminators
7
The — connects nodes over a network using a CENTRAL CONTROL UNIT called the —star topology hub
8
You can easily add nodes to a — by ATTACHING the REQUIRED NODES to the HUB.star-based network
9
Setting up a — requires a LOT OF CABLING because all the nodes have to connect to the hub.star topology
10
The — connects the nodes on a network through a POINT-TO-POINT CONNECTION.ring topology
11
Data is accepted from one neighboring node transmitted to other.Ring Topology
12
IN RING TOPOLOGY, DATA travels in —one direction.
13
If ONE of the nodes on the network STOPS, the ENTIRE NETWORK STOPS functioning.Ring Topology
14
Each node is connected to MORE THAN ONE NODE.Mesh Topology
15
Provide an ALTERNATE ROUTE mechanismMesh Topology
16
Excellent for LONG DISTANCE NETWORKINGMesh Topology
17
Supports back-up and reroutingMesh Topology
18
Used in LARGE INTERNETWORKING environments with stars, rings and buses as nodesMesh Topology
19
The — is created where the nodes are connected in a HIERARCHICAL MANNER.tree topology
20
In tree topology, the device at the root is referred to as the — for all the other nodes or devices in the network.parent
21
The nodes below a parent node are referred to as —child nodes.
22
The — can be a COMBINATION OF TWO OR MORE basic topologies such as bus, ring, star, mesh, or tree.hybrid topology
23
combine MORE THAN TWO TOPOLOGIES, which, in turn, enable you to get advantages of the constituent topologiesHybrid networks
24
NETWORK TOPOLOGIESBus Star Ring Mesh Tree Hybrid
25
topologyHybrid Topology
26
topologyTree Topology
27
topologyMesh Topology
28
topologyRing Topology
29
topologyStar Topology
30
topologyBus Topology