How long are AD compliance records required to be kept?

Where are technical descriptions of certificated propellers found?

"Check thrust bearing nuts for tightness on new or newly overhauled engines at the first 50-hour inspection following installation. Subsequent inspections on the thrust bearing nuts will be made at each third 50-hour inspection. From the above statement, at what intervals should you check the thrust bearing nut for tightness?"

Which regulation provides information regarding instrument range marking for an airplane certificated in the normal category?

What is the maintenance recording responsibility of the person who complies with an Airworthiness Directive?

What regulations are covered by 14 CFR Part 1?

"(1) The Federal Aviation Regulations require approval after compliance with the data of a Supplemental Type Certificate. (2) An installation of an item manufactirer in accordance with the Technical Standard Order system requires no further approval for installation in a particular aircraft. Regarding the statements,"

Primary responsibility for compliance with Airworthiness Directives lies with the

"(1) Propellers are NOT included in the Airworthiness Directive system. (2) A certificated powerplant mechanic may make a minor repair on an aluminum propeller and approve it for return to service. Regarding the statements,"

"A complete detailed inspection and adjustment of the valve mechanism will be made at the first 25 hours after the engine has been placed in service. Subsequent inspections of the valve mechanism will be made each second 50-hour period. From the above statement, at what intervals will valve mechanism inspections be performed?"

Type Certificate Data Sheets are issued for which of the following products?

An aircraft Type Certificate Data Sheet contains

What is the maximum penalty for cheating or other unauthorized conduct when taking an FAA mechanic test?

"(1) A Supplmental Type Certificate may be issued to more than one applicant for the same design change, providing each applicant shows compliance with applicable airworthiness requirement. (2) An installation of an item manufactured in accordance with the Technical Standard Order system requires no further approval for installation in a particular aircraft. Regarding the statements,"

"The Air Transport Association of America (ATA) Specification No. 100 (1) Establishes a standard for the presentation of technical data in maintenance manuals. (2) Divides the aircraft into numbered systems and subsystems in order to simplify location maintenance instructions. Regarding the statements,"

Placards required on an aircraft are specified in

"Which of the following are sometimes used as authorization to deviate from an aircraft's original type design? 1. FAA Form 337 2. Supplemental Type Certificate 3. Airworthiness Directives 4. Technical Standard Order"

When is a mechanic responsible for checking AD compliance?

What does the acronym TSO mean regarding a type certificated aircraft part, material, component and/or process

"The following is a table of airspeed limits as given in an FAA-issued aircraft specification: - Normal-exceed speed 293 knots - Maximum landing gear operation speed 174 knots - Maximum flap extended speed 139 knots The high end of the white arc on the airspeed instrument would be at"

Specifications pertaining to an aircraft model manufactured under a type certificate, of which less than 50 are shown on the FAA Aircraft Registry, can be found in

When an airworthy (at the time of sale) aircraft is sold, the Airworthiness Certificate

Under the Federal Aviation Regulations, an aviation maintenance technician is required to perform maintenance on an aircraft so that is

A Technical Standard Order (TSO) is issued by whom?

What does the Type Certificate Data Sheet designation code '2 PCSM' mean?

An aircraft mechanic is privileged to perform alterations on U.S. certificated aircraft; however, the work must be done in accordance with FAA-approved technical data before the aircraft can be returned to service. Which is NOT approved data?

The issuance of an Airworthiness Certificate is governed by

Airworthiness Directives are issued primarily to

"The action required by an AD may take what form? 1. Inspection 2. Part(s) replacement 3. Design modification 4. Change in the operating procedure(s) 5. Overall change in the content, firm, and disposition of the aircraft maintenance records."

Technical information about older aircraft models, of which no more than 50 remain in service can be found in the

"(1) Manufacter's data and FAA publications such as Airworthiness Directives, Type Certificate Data Sheets, and advisory circulars are all approved data. (2) FAA publications such as Technical Standard Orders, Airworthiness Directives, Type Certificate Data Sheets, and Aircraft Specifications and Supplemental Type Certificates are all approved data. Regarding the statements,"

Which regulation provides the airworthiness standards for an airplane certificated in the normal category?

Aviation Maintenance Alert (formerly General Aviaition Airworthiness Alerts)

The following words an example of what kind of statement in an AD? "Required within the next 25 hours time-in-service after the effective data of this AD, unless already accomplished."

What information is generally contain in Aircraft Specifications or Type Certificate Data Sheets?

Which of the following includes all the regulatory definitions of 'maintenance'?

Suitability for the use of a specific propeller with a particular engine-airplane combination can be determined by reference to what informational source?