AVIONICS 2

24問 • 1年前

Rev Caap

通報

問題一覧

The BCL:

Monitors battery charging

In a battery only configuration, this supplies the AC essentials.

Battery 1

The monitoring or close observation of behavior, activities, or information for the purpose of influencing, managing or directing.

Surveillance

This enables the pitot-static probe the means of de-icing and anti-icing

PITOT-STATIC HEATER, PITOT-STATIC HEATER SWITCH

The temperature measured in this way is used in to calculate True Airspeed (TAS)

TAT PROBE

This is adjusted for atmospheric factors related to altitude, such as temperature and air density change. For computations related to flight planning, the True Airspeed is used.

NONE OF THE ABOVE

The readout without taking into account any installation and instrument uncertainties or atmospheric conditions

IAS

Is the distance of how high an object is relative to the ground

AGL

Examples include cabin environment (pressure, temperatures etc.) flight control position, and auxiliary power units etc.

MISCELLANOUS INSTRUMENTS

VHF Frequency

118MHz-136 MHz

This controls the channel and volume of transmission/reception. Mostly used for Transmitting

ACP

It routes the signals generated by the crew and directs the signals to and from the appropriate radio or interphone system.

AMU

It is a signaling method which can alert an individual aircraft that a ground station wishes to communicate with it.

SELCAL

W Frequency Range

75Ghz-110GHz

The number of oscillations of a wave per unit time

Frequency

The lowest part of a wave

Trough

It is the distance between corresponding points of two consecutive waves.

Wavelength

The most significant deviation from equilibrium of a point on a vibrating body or wave in terms of displacement or distance traveled.

Amplitude

Rotating knobs in an ACP controls __________

Volume

Indicator light that represents an active system in the RMP

Green

An electromagnetic switch that is designed to operate electrically and used for switching the circuits by using low power signals.

Relay

Are typically used for high electrical loads and are designed with additional safety features like spring-loaded contacts that ensure that the electrical circuit is made open when de-energized.

Contactors

The batteries are connected to the DC BAT BUS if they need charging, When they are fully charged, BCL disconnects them.

TRUE

It is a single spool turbine that powers an electrical generator and air compressor

APU

AFCAR & PCAR

Rev Caap · 37問 · 1年前

AFCAR & PCAR

37問 • 1年前

Rev Caap

AFCAR & PCAR (Optimized)

Rev Caap · 63問 · 1年前

AFCAR & PCAR (Optimized)

Airframe Check

Airframe Check

Data & Entry

Data & Entry

Docs & Forms

Docs & Forms

Engine Check

Engine Check

Limits & Privileges

Limits & Privileges

Human Factor

Human Factor

Human Factors Model

Human Factors Model

Physics Fundamentals

Physics Fundamentals

Parts & Procedures

Parts & Procedures

Basic Math

Basic Math

AVIONICS

Rev Caap · 100問 · 1年前

AVIONICS

100問 • 1年前

Rev Caap

問題一覧

The BCL:

Monitors battery charging

In a battery only configuration, this supplies the AC essentials.

Battery 1

The monitoring or close observation of behavior, activities, or information for the purpose of influencing, managing or directing.

Surveillance

This enables the pitot-static probe the means of de-icing and anti-icing

PITOT-STATIC HEATER, PITOT-STATIC HEATER SWITCH

The temperature measured in this way is used in to calculate True Airspeed (TAS)

TAT PROBE

This is adjusted for atmospheric factors related to altitude, such as temperature and air density change. For computations related to flight planning, the True Airspeed is used.

NONE OF THE ABOVE

The readout without taking into account any installation and instrument uncertainties or atmospheric conditions

IAS

Is the distance of how high an object is relative to the ground

AGL

Examples include cabin environment (pressure, temperatures etc.) flight control position, and auxiliary power units etc.

MISCELLANOUS INSTRUMENTS

VHF Frequency

118MHz-136 MHz

This controls the channel and volume of transmission/reception. Mostly used for Transmitting

ACP

It routes the signals generated by the crew and directs the signals to and from the appropriate radio or interphone system.

AMU

It is a signaling method which can alert an individual aircraft that a ground station wishes to communicate with it.

SELCAL

W Frequency Range

75Ghz-110GHz

The number of oscillations of a wave per unit time

Frequency

The lowest part of a wave

Trough

It is the distance between corresponding points of two consecutive waves.

Wavelength

The most significant deviation from equilibrium of a point on a vibrating body or wave in terms of displacement or distance traveled.

Amplitude

Rotating knobs in an ACP controls __________

Volume

Indicator light that represents an active system in the RMP

Green

An electromagnetic switch that is designed to operate electrically and used for switching the circuits by using low power signals.

Relay

Are typically used for high electrical loads and are designed with additional safety features like spring-loaded contacts that ensure that the electrical circuit is made open when de-energized.

Contactors

The batteries are connected to the DC BAT BUS if they need charging, When they are fully charged, BCL disconnects them.

TRUE

It is a single spool turbine that powers an electrical generator and air compressor

APU