Removal of accessories that are listed as required equipment on the aircraft or engine specification is an example of

Who is responsible for maintaining an aircraft's airworthy condition including compliance with all airworthiness directives (PCAR 5.3.1.2)

Changes to the basic design of the fuel or oil system is considered

"A special flight permit may be issued for an aircraft that may not currently meet applicable airworthiness requirements, but is capable of safe flight when: 1. Flying the aircraft to a base where repairs, alterations, or maintenance are to be performed, or to a point of storage. 2. Delivering or exporting the aircraft. 3. Production flight testing new production aircraft. 4. Evacuating aircraft from areas of impending danger. 5. Conducting customer demonstration flights in new production aircraft that have completed production flight tests. Which statements are correct?"

Which part of Philippine Civil Aviation Regulation prescribes the requirements for certification of an aircraft and aeronautical components for continuing airworthiness?

The restoration of an aircraft/aeronautical product by using methods, techniques, and practices acceptable to the Authority, when it has been dissasembled, cleaned, inspect as permitted, repaired as necessary, reassembled, and tested to the same tolerances and limits as a new item, using either new parts or used parts that conform to new part tolerances and limits.

Simple or minor preservation operations and the replacement of small standard parts not involving complex assembly operation is known as

No person or entity, other than the Authority, may approve an aircraft, airframe, aircraft engine, propeller, appliance, or component part for return to servie after it has undergone maintenance, preventive maintenance, rebuilding, or modification, except as provided in the following

Who is responsible for ensuring that all maintenance required to be carried out in the hangar plus any defect rectification carried out during base maintenance, is carried out to specified design and quality standards

In compliance with the recent experience requirements, a licensed AMT may not exercise the privileges of his/her license or rating unless he/she served as an AMT under his/her license and rating for at least 6 months within preceding

Owners or operators of airplane over 5,700 kg and helicopters over 3.175 maximum take-off weight shall report to the Authority and to the organization responsible for the aircraft type design any failure, malfunction, or defect be made within

Who is responsible for ensuring that all aircraft maintenance records are kept up to date?

Disassembly of crankcase or crankshaft of a reciprocating engine equipped with an integral supercharger is anexample of (Part IS.5.1.1.2)

Rewinding the field coil of an electrical accessory is an example of?

How long does a holder of a certificate issued under 14 CFR Part 65 have to notify the authority after any change in permenant mailing address?

Change to the hub design is?

Conversions of any sort for the purpose of using fuel of a rating or grade other than that listed in the engine specifications is (Part IS 5.1.1.2)

Who is responsible for maintaining the aircraft from unairworthy condition?

The installation or removal of equipment of equal or less weight and in the same location as the last listed as optional equipment in the aircraft specifications is

Modification of the basic design not made in accordance with applicable airworthiness directives is considered as (Part IS: 5.1.1.2)

Standard certificate of airworthiness directives, special certificate of airworthiness directives, and certificate of airworthiness issued for restricted or limited category aircraft, as long as the maintenance, preventive maintenance and alterations are performed, are effective for how many year/s?

A document signed by an authorized representative of an Approved Maintenance Organization (AMO) in respect to an inspection, repair, or modification on a complete aircraft, engine, or propeller after it has received maintenance performed (Part IS: 5.1.1.2)

Calibration of avionics or computer equipment is an example of?

Which is considered to be typical preventive maintenance operations (Part IS 5.1.1.2)

An applicant for an AMT license and any assocated rating shall be at least

The AMO shall relieve the person performing maintenance functions from all duties for how many consecutive hours during any 7 consecutive day period?

What is classified as a major repair?

Any maintenance operation requiring the opening of cold and hot sections of a turbine is considered

The alteration of an aircraft or aeronautical product in conformity with an approved standard is called

No person may assign, nor shall any person perform maintenance functions for aircraft unless that person had a minimum rest period of how many hours prior to beginning of duty?

Following unscheduled duty periods, the person performing maintenance functions for an aircraft shall have mandatory rest period of

In situations involving unscheduled aircraft unservicability, persons performing maintenance funtions for aircraft ay be continued on duty for

An example of powerplant major repair is

Replacing any cowling not requiring removal of the propeller or disconnection of flight controls is considered

A certificate or rating issued to an approved maintenance organization is valid for how many year/s from the date of issuannce subject to compliance with the AMO procedure manual?

The contracting state on whose register is entered

All Philippine registered aircraft used in general aviation shall be re-weighed

Fabrication performed in the wing main ribs and compressions members is a (IS: 5.1.1.2)

A permanant record of every maintenance (not including preventive maintenance) repair of building alterations on any airframe, powerplant, propeller, or appliance shall be maintained by

Who is authorized to repair an aicraft instrument?

An experimental certificate for research and development, showing compliance with regulations, crew training, or market survery, after the date of issue or renewal unless the authority prescribes a shorter period, are effective for how many year/s?

Replacing defective wiring or cotter pins is

Calibration and repair of instruments is an example of (Part IS: 5.1.1.2)?

No person may schedule a personnel to perform a maintenace task on an aircraft for more than how many consecutive hours of duty?

All Philippine registered aircraft used in commercial or aerial work operations shall be re-weighed

A special flight permit may be issued for an aircraft that may not currently meet applicable airworthiness requirements, but is capable of safe flight for the purposes of (PCAR 5.4.1.4)

A certification confirming that the maintenance work to which it relates has been compiled with in accordance with applicable standardsd of airworthiness using approved data.

Where would you find the recommended statement for recording the approval or disapproval for return to service of an aircraft after a 100-hour or annual inspection?

The Contracting state which approved the original type certificate and any subsequent supplemental type cetrificates for an aircraft, or which approved the design of an aeronautical product or appliance.

An applicant for an AMT license for Powerplant and Airframe ratings relying solely on practical experience shall provide documentary evidence of

The Approved Maintenance Organization (AMO) shall relieve the person performing maintenance funtions from all duties for 24 hours after working for

Removal, installation, and repair of landing gear tires in PCAR 5.1.1.2 is?

Special repair to structural engine parts by welding, plating, metalizing, or other methods is an example of (Part 5.1.1.2)

What is the regulatory definition of preventive maintenance?

An Aviation Maintenance Technician or Specialist who seeks reinstatement of his/her license that has already expired 24 months from expiration date shall

Installation of an accessory that is not approved for the engine is an example of

If an aircraft is not approved for return to service after an annual inspection and it needs to fly to another location to perform a modification,

Replacing or cleaning spark plugs and setting of spark plug gap clearance is considered as? (Part IS 5.1.1.2)

Refinishing decorative coating of fuselage, wings, tail group surfaces (excluding balanced control surfraces), fairings, cowling, landing gear, cabin, or cockpit interior when removal or disassembly of any primary structure or operating system is not required is

When overhauling electrical equipment, all necessary information should be obtained from

The owner of an aircraft or, in the case of a leased aircraft, the lessee, shall be responsible for maintaining the aircraft in an airworthy condition

A holder of an AMT license desiring to renew must accomplish and submit the requirements within how many days prior to the expiry of his/her license?

The state that has jurisdication over the organization responsible for the final assembly of the aircraft engine or propeller