暗記メーカー

暗記メーカー

​
ログイン
AFCAR 2
19問 • 1年前
  • Dale Cabanlong
    • 通報

    問題一覧

  • 1

    Airframe minor repairs  includes

    wing and control surface fairings

  • 2

    When can you consider the repair on the following airframe, a major repair

    The repair damaged areas in the plywood stressed covering exceeding (6) inches in any direction

  • 3

    Changes to the basic design of the fuel or oil system is considered

    airframe major modification

  • 4

    Replacing defective safety wiring or cotter pins is

    preventive maintenance

  • 5

    What does it mean it is said that a component conforms with a technical standard order?

    it does not require an STC when used in an alteration

  • 6

    The restoration of an engine mounts to a condition for safe operation after damage is classified as

    airframe major repair

  • 7

    Strengthening or reinforcing the fuselage longeron.

    airframe major repair

  • 8

    When a major repair alteration results in any change in the aircraft operating limitations or data contained in approved airplane flight manual appropriate amendments to the aircraft operating limitations shall be made  in

    the form and manner prescribed by the CAAP

  • 9

    Replacement of components or complete units such as landing gears with parts supplied by the original manufacturer or manufactured in accordance with approved drawings is considered

    airframe minor repair

  • 10

    Which of the following is a portion of the required permanent maintenance record entry after 100-hour inspection?

    The date of the inspection and aircraft time in service

  • 11

    Change in the basic design made in accordance with the “ASSEC” of the air transportation approved recommendation of the “Landing gear shock strut” manufacturing or in accordance with ATO airworthiness directives are considered to be

    appliance minor alteration

  • 12

    Removal of accessories that are listed as required equipment on the aircraft or engine specifications is an example of

    powerplant major modification

  • 13

    Separation or disassembly of a crankcase or crankshaft of a reciprocating engine equipped with an integral supercharger is an example of

    powerplant major repair

  • 14

    The restoration of an aircraft/aeronautical product by using methods, techniques, and practices acceptable to the Authority, when it has been disassembled, cleaned, inspected as permitted, repaired as necessary, reassembled, and tested to the same tolerances and limits as a new item, using either new parts or used parts that conform to new part tolerances and limits

    rebuild

  • 15

    Who is responsible for ensuring that all maintenance required to be carried out in the hangar plus any defect rectification carried out during base maintenance, is carried out to specified design and quality standards?

    line maintenance manager

  • 16

    The AMO shall relieve the person performing maintenance functions from all duties for 24 consecutive hour after working for 

    7 consecutive days

  • 17

    Which part of Philippine Civil aviation Regulation prescribe the requirements for certification of an aircraft and aeronautical components or continuing airworthiness?

    PCAR PART 5 (airworthiness)

  • 18

    Change to the Hub Design is?

    propeller major modification

  • 19

    Rewinding the field coil of an electrical accessories is an example of?

    appliance major repair

    • human performance

    human performance

    Dale Cabanlong · 33問 · 1年前

    human performance

    human performance

    33問 • 1年前
    Dale Cabanlong

    nat sci

    nat sci

    Dale Cabanlong · 31問 · 1年前

    nat sci

    nat sci

    31問 • 1年前
    Dale Cabanlong

    nat sci 2

    nat sci 2

    Dale Cabanlong · 35問 · 1年前

    nat sci 2

    nat sci 2

    35問 • 1年前
    Dale Cabanlong

    nat sci 3

    nat sci 3

    Dale Cabanlong · 19問 · 1年前

    nat sci 3

    nat sci 3

    19問 • 1年前
    Dale Cabanlong

    PCAR

    PCAR

    Dale Cabanlong · 23問 · 1年前

    PCAR

    PCAR

    23問 • 1年前
    Dale Cabanlong

    PCAR 2nd

    PCAR 2nd

    Dale Cabanlong · 21問 · 1年前

    PCAR 2nd

    PCAR 2nd

    21問 • 1年前
    Dale Cabanlong

    PCAR FINAL

    PCAR FINAL

    Dale Cabanlong · 15問 · 1年前

    PCAR FINAL

    PCAR FINAL

    15問 • 1年前
    Dale Cabanlong

    AFCAR 1

    AFCAR 1

    Dale Cabanlong · 24問 · 1年前

    AFCAR 1

    AFCAR 1

    24問 • 1年前
    Dale Cabanlong

    aircraft fuel systems 1

    aircraft fuel systems 1

    Dale Cabanlong · 54問 · 1年前

    aircraft fuel systems 1

    aircraft fuel systems 1

    54問 • 1年前
    Dale Cabanlong

    問題一覧

  • 1

    Airframe minor repairs  includes

    wing and control surface fairings

  • 2

    When can you consider the repair on the following airframe, a major repair

    The repair damaged areas in the plywood stressed covering exceeding (6) inches in any direction

  • 3

    Changes to the basic design of the fuel or oil system is considered

    airframe major modification

  • 4

    Replacing defective safety wiring or cotter pins is

    preventive maintenance

  • 5

    What does it mean it is said that a component conforms with a technical standard order?

    it does not require an STC when used in an alteration

  • 6

    The restoration of an engine mounts to a condition for safe operation after damage is classified as

    airframe major repair

  • 7

    Strengthening or reinforcing the fuselage longeron.

    airframe major repair

  • 8

    When a major repair alteration results in any change in the aircraft operating limitations or data contained in approved airplane flight manual appropriate amendments to the aircraft operating limitations shall be made  in

    the form and manner prescribed by the CAAP

  • 9

    Replacement of components or complete units such as landing gears with parts supplied by the original manufacturer or manufactured in accordance with approved drawings is considered

    airframe minor repair

  • 10

    Which of the following is a portion of the required permanent maintenance record entry after 100-hour inspection?

    The date of the inspection and aircraft time in service

  • 11

    Change in the basic design made in accordance with the “ASSEC” of the air transportation approved recommendation of the “Landing gear shock strut” manufacturing or in accordance with ATO airworthiness directives are considered to be

    appliance minor alteration

  • 12

    Removal of accessories that are listed as required equipment on the aircraft or engine specifications is an example of

    powerplant major modification

  • 13

    Separation or disassembly of a crankcase or crankshaft of a reciprocating engine equipped with an integral supercharger is an example of

    powerplant major repair

  • 14

    The restoration of an aircraft/aeronautical product by using methods, techniques, and practices acceptable to the Authority, when it has been disassembled, cleaned, inspected as permitted, repaired as necessary, reassembled, and tested to the same tolerances and limits as a new item, using either new parts or used parts that conform to new part tolerances and limits

    rebuild

  • 15

    Who is responsible for ensuring that all maintenance required to be carried out in the hangar plus any defect rectification carried out during base maintenance, is carried out to specified design and quality standards?

    line maintenance manager

  • 16

    The AMO shall relieve the person performing maintenance functions from all duties for 24 consecutive hour after working for 

    7 consecutive days

  • 17

    Which part of Philippine Civil aviation Regulation prescribe the requirements for certification of an aircraft and aeronautical components or continuing airworthiness?

    PCAR PART 5 (airworthiness)

  • 18

    Change to the Hub Design is?

    propeller major modification

  • 19

    Rewinding the field coil of an electrical accessories is an example of?

    appliance major repair