quiz

29問 • 2年前

ユーザ名非公開

通報

問題一覧

all

producing treated wood that is highly leach-resistant and safe to use in applications with regular human contact. fix

FIXATION

Consists in placing the wood in cylinders into which the preservative is pumped under adik ba si range

PRESSURE TREATMENT

Thisconsists first in placing the wood in a bath of hot preservative for an hour or more. It is then withdrawn and quickly placed in a bath of cold preservative. This is generally used for creosote preservative pamandilu

HOT AND COLD BATH METHOD

the most common wood composite. It gets its name from its construction: it is made of several thin plies, or veneers, of wood that have been glued together. Each ply or veneer is glued so that its grain is at right angles to the grain of the previous ply.

PLYWOOD

all

This is a paneling material made by reducing and refining wood chips into small, threadlike fibers, and then pressing them under heat in hydraulic pressure into dense, smooth, and very rigid panels. masys

HARDBOARD

light brown in color and has a fairly hard, smooth surface on one side and a screened impression on the other. It is flexible and easy to bend. It is suitable for interior use only and where it is not subject to moisture. electrifan

STANDARD HARDBOARD

somewhat denser than the Standard but not as dense as Tempere

PANEL HARDBOARD

the densest type, made by impregnating standard board with tempering compound of oils and resins and baking it to polymerize the tempering materials. It is dark brown in color, brittle and stiff, with improved machining qualities and greater resistance to moisture and water penetration, making it ideal for exterior use

TEMPERED HARDBOARD

is made by bonding together wood particles with an adhesive under heat and pressure to form a rigid board with a relatively smooth surface, often faced with veneer. It is made by binding phenolic resin or urea formaldehyde glu micro cp

CHIP BOARD

This is a non-combustible building board with a gypsum core enclosed in tough, smooth paper. It is designed to be used without addition of plaster for walls, ceilings or partitions. It is extensively used in “dry-wall” construction, where plaster is eliminated

GYPSUM BOARD

This type is used for surface layer on interior walls and ceilings. The regular wallboard comes with grey liner paper backing and special paper finish on the facing and edges suitable for decoration. The foil-backed gypsum board has aluminum foil bonded to the liner paper to serve as vapor barrier and thermal insulation. Predecorated gypsum board comes with a decorative vinyl or paper sheet on its fac simpli yamu

WALL BOARD

This is used as base layer in multi-ply construction, where several layers of gypsum boards are desired for high fire resistance, sound control and strength in walls

BACKING BOARD

To save space, this type is used as a base in a multi-ply construction of self-supporting (studless) gypsum walls. It comes in 1” (25mm) thickness or 2- factory-laminated, 1⁄2 “ thick layers of backing board

CORE BOARD

For use in fire-rated assemblies, this may be wallboard, backing board, or coreboard made more fire-resistant by addition of glass-fiber or other reinforcing materia cut keyboard

TYPE X GYPSUM BOARD

This type comes with water-resistant gypsum core and water-repellant face paper. It maybe used as base for walls of bathrooms, showers, and other areas exposed to wetting. backing atyu ne babo

WATER RESISTANT BACKING GYPSUM BOARD

This type is used as fire protection and bracing of exterior frame walls. It must be protected from the weather by an exterior facing.

GYPSUM SHEATHING

This type is used as a permanent form in the casting of gypsum concrete roof decks.

GYPSUM FORMBOARD

made of small wood chips and base materials including cotton stalk, rice straw, bagasse, conventional wood chips and sawdust that have been pressed and glued togethe malati

PARTICLE BOARD

of finished lumber which is further cut and processed at a lumber mill. Millwork includes doors, windows, mouldings, trim and other ornamental forms of wood.

MILLWORK

Are used to fisnish the joint between the cieling

CORNICE

conceal and finish the joint between the wall and flooring

BASE BOARD

Popular brands are “LUCITE” and “PLEXIGLASS”, this material combines the transparency of glass (but not scratch-proof quality) with plastics’ shatterproof quality. Used principally for skylights, skydomes, safety glass, paints, adhesive pamintura

ACRYLIC

In spite of its sensitivity to solvent action, its is one of most important thermoplastics because of its excellent transparency and rigidity and its easy moldability. It is non-water absorbent, it is found in colorful, but brittle wall tiles. It is one of several plastics used in lighting fixture diffusers. In foam form, it has become an important thermal insulator. Also found in paint for concrete. mouth wash

POLYSTYRENE

a largely amorphous, rigid, tough, solvent- resistant, flame-resistant thermoplastic. Used for resilient floor tile, films, pipes, and for paint lacquers, adhesives and safety gl boga

PVC

family of linear polyesters, is a white, substantially amorphous, very tough and strong material with good heat resistance up to 150 deg C and excellent dimensional stability. It is injection-molded to produce plates, rods, gears, and other shaped parts that advantageously replace die-cast metal parts. Used for skyli panulu

POLYCARBONATE

The term nylon refers to a family of polymers called linear polyamides. It is desired for the following properties: exceptionally strong, elastic, abrasion resistant, easy to wash, resistant to damage from oil and many chemicals, can be precolored or dyed in wide range of colors, and resilient pamadwas

NYLON

used in buildings for its remarkable adhesive qualities. It may also be used for special paints that are chemically resistant and for special caulking compounds. pandikit

EPOXY

btect

btect

btect

btect

summer btect

summer btect

summer btect II

summer btect II

btect division 3

btect division 3

midterm

midterm

quiz

quiz

quiz

quiz

metal

metal

WATER PROOFING

WATER PROOFING

GLASS

GLASS

plan midterm

plan midterm

final plan

final plan

ppract

ppract

history

history

building utilities

building utilities

structural

structural

HOUSING AND URBAN PLANNING

ユーザ名非公開 · 98問 · 1年前

HOUSING AND URBAN PLANNING

toa

toa

btect

btect

問題一覧

all

producing treated wood that is highly leach-resistant and safe to use in applications with regular human contact. fix

FIXATION

Consists in placing the wood in cylinders into which the preservative is pumped under adik ba si range

PRESSURE TREATMENT

HOT AND COLD BATH METHOD

PLYWOOD

all

HARDBOARD

STANDARD HARDBOARD

somewhat denser than the Standard but not as dense as Tempere

PANEL HARDBOARD

TEMPERED HARDBOARD

CHIP BOARD

GYPSUM BOARD

WALL BOARD

This is used as base layer in multi-ply construction, where several layers of gypsum boards are desired for high fire resistance, sound control and strength in walls

BACKING BOARD

CORE BOARD

For use in fire-rated assemblies, this may be wallboard, backing board, or coreboard made more fire-resistant by addition of glass-fiber or other reinforcing materia cut keyboard

TYPE X GYPSUM BOARD

This type comes with water-resistant gypsum core and water-repellant face paper. It maybe used as base for walls of bathrooms, showers, and other areas exposed to wetting. backing atyu ne babo

WATER RESISTANT BACKING GYPSUM BOARD

This type is used as fire protection and bracing of exterior frame walls. It must be protected from the weather by an exterior facing.

GYPSUM SHEATHING

This type is used as a permanent form in the casting of gypsum concrete roof decks.

GYPSUM FORMBOARD

made of small wood chips and base materials including cotton stalk, rice straw, bagasse, conventional wood chips and sawdust that have been pressed and glued togethe malati

PARTICLE BOARD

of finished lumber which is further cut and processed at a lumber mill. Millwork includes doors, windows, mouldings, trim and other ornamental forms of wood.

MILLWORK

Are used to fisnish the joint between the cieling

CORNICE

conceal and finish the joint between the wall and flooring

BASE BOARD

ACRYLIC

POLYSTYRENE

a largely amorphous, rigid, tough, solvent- resistant, flame-resistant thermoplastic. Used for resilient floor tile, films, pipes, and for paint lacquers, adhesives and safety gl boga

PVC

POLYCARBONATE

NYLON

used in buildings for its remarkable adhesive qualities. It may also be used for special paints that are chemically resistant and for special caulking compounds. pandikit

EPOXY