compre set 3
問題一覧
1
what is the minimum design thickness for asphalt overlay projects?
50mm
2
what is the minimum STE individual years of experience for Class A category AA contractor?
10yrs
3
what is the maximum allowable single project cost for Small B category C contractor?
15 million
4
what is the maximum allowable contract cost for medium A category B contractors?
150 million
5
what is the minimum width of turnouts, loading and unloading bay, to accommodate all types of vehicle?
3.60m
6
what is the standard color for all DPWH steel bridges? international ___
orange
7
national route numbering (NRS) should remain over the medium term and reviews shall be undertaken on a periodic ____ cycle
6 yrs
8
what is the minimum width of zebra (longitudinal bars) for pedestrian crossing markings?
4.0m
9
pedestrian crossing markings at road intersections without channelized islands shall be placed outside the intersection area at least ___ set back from the edge of road.
2.0m
10
who is the approving official if the work suspension order (WSO) is beyond 120 CD?
undersecretary
11
what is the standard dimension for project billboard?
1.22m x 2.44m
12
for road projects with length of 10km or more, additional billboard shall also be installed at every ____ interval
5.0km
13
no other billboards shall be allowed to be installed ____ before and after all DPWH projects and in-between the project limits or within the road right-of-way.
100m
14
it is acceptable for "as-built plans" as a reason for final variation order if the cumulative increase in value of work does not exceed ___ of the adjusted original contract price.
5%
15
what is the maximum amount for regional directors to procure, implement, and approved plans, POW, and ABC?
400million
16
what is the maximum amount for DE to procure, implement, and approved plans, POW, and ABC?
150million
17
what is the maximum amount for "ALL" DE to approved POW, ABC and plans like as-built and as-staked?
50million
18
what is the minimum pavement thickness for farm to market roads?
200mm
19
what is the minimum radius of horizontal curve for farm to market roads
30m
20
what is the minimum radius of horizontal curve for tourism roads?
50m
21
the RROW boundary marker poats shall be installed along the RROW limit line on each side of the road at ____ km interval
1km
22
on highly urbanized area, RROW marker shall be concrete block embedded on the surface along the edge of concrete sidewalk on each side of the road at ___ interval.
200m
23
all permanent bridges along national roads shall be provided with the informative signs to be posted on conspicuous place within ___ before the abutment at both approaches.
5m
24
what is the negative slippage for ICU stage
10%
25
what is the negative slippage for Terminal stage
15%
26
what is the maximum distance outside the shoulder for kilometer post from the edge of the road pavement?
2.5m
27
if the shoulder is lwss than 2.0m, what is the setback distance of the kilometer post from the edge of the shoulder?
0.5m
28
what is the spacing of dowel bars for 280mm thick PCCP
300mm
29
what is the spacing of dowel bars for 300mm thick PCCP
274mm
30
vertical clearance for bridges over navigable waterways is the sum of highest water level (hwl) and height of vessel (hv) and the K factor. what is the constant value of the k factor?
1.0m
31
contractor shall shoulder all the expenses for the alteration and/or reconstruction of the structure and a fine of ____% of the original total contract price, if they violated the minimum vertical clearance for Bridges over navigable waterways.
2.0
32
what is the setback distance from the RROW limit for welcome arches and overhead boundary markers?
2.0m
33
what is the minimum vertical clearance of the welcome arch/overhead boundary marker from the roadway surface?
5.33m
34
what is the minimum vertical clearance of the overhead utilities and power lines from the roadway surface to the calculated lowest point of cable sag?
5.50m
35
what is the minimum vertical clearance of the overhead utilities and power lines from the sidewalka surface to the calculated lowest point of cable sag?
4.88m
36
what is the minimum sidewalk width as per accessibility law BP 344 along national highways?
1.20m
37
what is the minimum ans maximum height of signages on walls and doors as per accessibility law BP344
1.40m-1.60m
38
during re-blocking construction of PCCP, the breaking and restoration of pavement in 2-lane carriageway shall be limited to 1-lane and not more than ____ in length at any time in non-urban areas.
100m
39
during re-blocking construction of PCCP, the breaking and restoration of pavement in 2-lane carriageway shall be limited to 1-lane and not more than ____ in length at any time in urban areas.
50m
40
the cut-off date of physical accomplishments to be reflected in progress billings shall be reckoned on the ____ day of each month instead of the 25th day of the month.
10th
41
monthly accomplishment for any DPWH project shall constitute the works completed and accepted from the ___ day of the preceding month up to the ___ day of the current month.
11th and 10th
42
what is the minimum PCCP width on national roads
6.7m
43
what is the minimum PCCP width of tourism roads?
6.1m
44
what is the minimum PCCP slab thickness on national roads?
280mm
45
for span lengths of 21-30m, what bridge type shall be use as per DO 30 series of 2011?
PSCG
46
for span lengths of 6-12m, what bridge type shall be use as per DO 30 series of 2011?
flat slab
47
which of the following contractor category is not required for ISO 9000 certification?
none of the above
48
what is the minimum individual years of construction experience for Sustaining Technical Employee (STE)?
3 yrs
49
what is the minimum individual years of construction experience for Sustaining Technical Employee (STE) for all Classes and Categories of a contractor?
10 yrs
50
what is the minimum financial capacity, net worth / equity of a class A category A contractor in pesos?
30 million
51
what is the minimum financial capacity, net worth/ equity of a class A category AAAA contractor in pesos?
1 billion
52
what do you call the project scheduling technique used for DPWH projects?
PDM
53
if the actual soil bearing capacity of the natural ground is less than 96 kPa at depth of 1.5m, what is the maximum depth of the isolated footing?
2.0m
54
what is design speed for Flat terrain of tourism roads?
60 kph
55
what is design speed for mountainous terrain of farm to market roads?
30 kph
56
what is design speed for flat terrain of farm to market roads?
30 kph
57
what is the roadway cross slope for PCCP?
1.50%
58
what is the roadway cross slope for gravel surfacing of sidewalk?
3.0%
59
it is the physical island at the center of a divides roadway separating traffic flows.
median island
60
it is designed to control and direct traffic movent, usually turning.
channelizing island
61
as a minimum requirement for bridge projects, ___ bored pile(s) shall be tested representing each pile size.
1
62
for buildings, at least ____ of the total number of bored piles shall be tested.
5%
63
as per BP 344, handrails attached to walls should have a clearance no less than 50mm from the wall and handrails on ledges should have a clearance not less than ____.
40mm
64
what is the minimum raised height required for signages/symbols labeling public rooms and places?
1 mm
65
to guide the blind, sidewalks should as much as possible follow straight forward routes with
right
66
what is the minimum width of the refuge island and its total length?
1.5m, 30m
67
the refuge island shall be provided in roadways having clear carriageway width of at least ___ lanes.
4
68
what is the flood flow velocity criteria in designing slope protection works?
3m/sec
69
what is the minimum desirable length of turnouts, unloading and loading bays, on national roads?
60m
70
what is the maximum length of turnouts, unloading and loading bays, on national roads?
185m
71
if the actual soil bearing capacity of school building did not meet the required 96 kpa soil bearing capacity, the implementing office may opt to perform / use the following except one:
H-piles
72
what is the width of the stop line in urban roads?
450mm
73
what is the width of the stop line in rural roads?
600mm
74
when using reclaimed asphalt pavement (RAP) as partial replacement to coarse aggregate in hot-mix asphalt (HMA), what is the maximum % for item 310 grading D and grading B?
25%, 40%
75
if the actual condition of the soil in school building is susceptible to liquefaction, ground improvement technique may be performed except one;
none of the above
76
the minimum bridge carriageway width for tourism roads
6.70m
77
the minimum bridge carriageway width for 5.0m width-farm to market roads
5.60m
78
the minimum bridge carriageway width for 6.1m width-farm to market roads
6.70m
79
what is the flood frequency used in hydraulic analysis for bridge design?
50 yrs
80
for pre-cast concrete curb and gutter, minimum curb inlet interval (D) is ___ in flooded areas and ___ in other areas.
10m, 20m
81
for multi-span bridges, pile bearing capacity test shall be conducted ___ at each abutment and 1 at every other pier
1
82
pile integrity test shall be conducted on at least ___ of the total number of bored piles at each abutment and pier of bridges or at the entire foundation area of buildings.
50%
83
cross hole sonic logging test (CSL) is recommended for bored piles with embedded length of more than ___.
30m
84
what is the minimum width of a curb cut-out?
0.90m
85
when the AADT is greater than ___ vehicles, paving of shoulder is necessary
1,250
86
minimum distance between two consecutive pedestrian refuge islands along the highway shall not be less than ___ meters
500m
87
what is the navigable clearance of a bridge over navigable waterways with the given data: HWL=15m AND HV=10m
26m
88
if the length and width of the drainage area is equal to 50m and 100m respectively; what should be the length of the channel?
136.8m
89
compute the amount of liquidated damages (LD) given the following data:
Remaining scope of work amount is Php1,000,000.00 and the contractor completed the remaining scope of work in 15 CD time.
Php 15,000.00
90
defects liability period
1 yr
91
as per RA 11058, the general contractor must provide one (1) construction safety and health officer for every ___ units of heavy equipment assigned to the project site to oversee the effective compliance with the COSH program
10 units
92
what is the maximum gradient for curb cut-outs?
1:12
93
as per BP 344 requirements, what is the walking speed design on the crossings?
0.90m/sec
94
what is the length of tangent between reverse curves for both tourism and farm to market roads?
30m
95
for roadway obstructions, such as bridge piers, what is the width of the black and white stripes on the object markings?
300m
96
for roadway obstructions markings, what is the minimum width of the black and white strips on the object markings?
100mm
97
what is the maximum gradient for sidewalk as per BP 344?
1:20
98
for raised median island, planting of trees should not be permitted on high speed multilane divided highway and the surface level of soil fill shall be lower than the top of island-50mm for island height less than or equal to ___ and 10mm for island height greater than ___
0.45m
99
the pavement thickness of turnout, unloading and loading bays, shall in no case be less than ___ for asphalt and 230mm for concrete with supporting base layers
100mm
100
during road re-blocking works, holes of ___ diameter and spaced at 300mm shall be drilled at 1/2 of the existing concrete pavement thickness to permit the load transfer transverse construction joints.
26mm
module 2
module 2
Wilson Angelo Oraza · 259問 · 2年前module 2
module 2
259問 • 2年前module 3
module 3
Wilson Angelo Oraza · 107問 · 2年前module 3
module 3
107問 • 2年前module 4
module 4
Wilson Angelo Oraza · 59問 · 2年前module 4
module 4
59問 • 2年前item #
item #
Wilson Angelo Oraza · 25問 · 2年前item #
item #
25問 • 2年前compre set 1
compre set 1
Wilson Angelo Oraza · 100問 · 2年前compre set 1
compre set 1
100問 • 2年前compre set 4
compre set 4
Wilson Angelo Oraza · 50問 · 2年前compre set 4
compre set 4
50問 • 2年前問題一覧
1
what is the minimum design thickness for asphalt overlay projects?
50mm
2
what is the minimum STE individual years of experience for Class A category AA contractor?
10yrs
3
what is the maximum allowable single project cost for Small B category C contractor?
15 million
4
what is the maximum allowable contract cost for medium A category B contractors?
150 million
5
what is the minimum width of turnouts, loading and unloading bay, to accommodate all types of vehicle?
3.60m
6
what is the standard color for all DPWH steel bridges? international ___
orange
7
national route numbering (NRS) should remain over the medium term and reviews shall be undertaken on a periodic ____ cycle
6 yrs
8
what is the minimum width of zebra (longitudinal bars) for pedestrian crossing markings?
4.0m
9
pedestrian crossing markings at road intersections without channelized islands shall be placed outside the intersection area at least ___ set back from the edge of road.
2.0m
10
who is the approving official if the work suspension order (WSO) is beyond 120 CD?
undersecretary
11
what is the standard dimension for project billboard?
1.22m x 2.44m
12
for road projects with length of 10km or more, additional billboard shall also be installed at every ____ interval
5.0km
13
no other billboards shall be allowed to be installed ____ before and after all DPWH projects and in-between the project limits or within the road right-of-way.
100m
14
it is acceptable for "as-built plans" as a reason for final variation order if the cumulative increase in value of work does not exceed ___ of the adjusted original contract price.
5%
15
what is the maximum amount for regional directors to procure, implement, and approved plans, POW, and ABC?
400million
16
what is the maximum amount for DE to procure, implement, and approved plans, POW, and ABC?
150million
17
what is the maximum amount for "ALL" DE to approved POW, ABC and plans like as-built and as-staked?
50million
18
what is the minimum pavement thickness for farm to market roads?
200mm
19
what is the minimum radius of horizontal curve for farm to market roads
30m
20
what is the minimum radius of horizontal curve for tourism roads?
50m
21
the RROW boundary marker poats shall be installed along the RROW limit line on each side of the road at ____ km interval
1km
22
on highly urbanized area, RROW marker shall be concrete block embedded on the surface along the edge of concrete sidewalk on each side of the road at ___ interval.
200m
23
all permanent bridges along national roads shall be provided with the informative signs to be posted on conspicuous place within ___ before the abutment at both approaches.
5m
24
what is the negative slippage for ICU stage
10%
25
what is the negative slippage for Terminal stage
15%
26
what is the maximum distance outside the shoulder for kilometer post from the edge of the road pavement?
2.5m
27
if the shoulder is lwss than 2.0m, what is the setback distance of the kilometer post from the edge of the shoulder?
0.5m
28
what is the spacing of dowel bars for 280mm thick PCCP
300mm
29
what is the spacing of dowel bars for 300mm thick PCCP
274mm
30
vertical clearance for bridges over navigable waterways is the sum of highest water level (hwl) and height of vessel (hv) and the K factor. what is the constant value of the k factor?
1.0m
31
contractor shall shoulder all the expenses for the alteration and/or reconstruction of the structure and a fine of ____% of the original total contract price, if they violated the minimum vertical clearance for Bridges over navigable waterways.
2.0
32
what is the setback distance from the RROW limit for welcome arches and overhead boundary markers?
2.0m
33
what is the minimum vertical clearance of the welcome arch/overhead boundary marker from the roadway surface?
5.33m
34
what is the minimum vertical clearance of the overhead utilities and power lines from the roadway surface to the calculated lowest point of cable sag?
5.50m
35
what is the minimum vertical clearance of the overhead utilities and power lines from the sidewalka surface to the calculated lowest point of cable sag?
4.88m
36
what is the minimum sidewalk width as per accessibility law BP 344 along national highways?
1.20m
37
what is the minimum ans maximum height of signages on walls and doors as per accessibility law BP344
1.40m-1.60m
38
during re-blocking construction of PCCP, the breaking and restoration of pavement in 2-lane carriageway shall be limited to 1-lane and not more than ____ in length at any time in non-urban areas.
100m
39
during re-blocking construction of PCCP, the breaking and restoration of pavement in 2-lane carriageway shall be limited to 1-lane and not more than ____ in length at any time in urban areas.
50m
40
the cut-off date of physical accomplishments to be reflected in progress billings shall be reckoned on the ____ day of each month instead of the 25th day of the month.
10th
41
monthly accomplishment for any DPWH project shall constitute the works completed and accepted from the ___ day of the preceding month up to the ___ day of the current month.
11th and 10th
42
what is the minimum PCCP width on national roads
6.7m
43
what is the minimum PCCP width of tourism roads?
6.1m
44
what is the minimum PCCP slab thickness on national roads?
280mm
45
for span lengths of 21-30m, what bridge type shall be use as per DO 30 series of 2011?
PSCG
46
for span lengths of 6-12m, what bridge type shall be use as per DO 30 series of 2011?
flat slab
47
which of the following contractor category is not required for ISO 9000 certification?
none of the above
48
what is the minimum individual years of construction experience for Sustaining Technical Employee (STE)?
3 yrs
49
what is the minimum individual years of construction experience for Sustaining Technical Employee (STE) for all Classes and Categories of a contractor?
10 yrs
50
what is the minimum financial capacity, net worth / equity of a class A category A contractor in pesos?
30 million
51
what is the minimum financial capacity, net worth/ equity of a class A category AAAA contractor in pesos?
1 billion
52
what do you call the project scheduling technique used for DPWH projects?
PDM
53
if the actual soil bearing capacity of the natural ground is less than 96 kPa at depth of 1.5m, what is the maximum depth of the isolated footing?
2.0m
54
what is design speed for Flat terrain of tourism roads?
60 kph
55
what is design speed for mountainous terrain of farm to market roads?
30 kph
56
what is design speed for flat terrain of farm to market roads?
30 kph
57
what is the roadway cross slope for PCCP?
1.50%
58
what is the roadway cross slope for gravel surfacing of sidewalk?
3.0%
59
it is the physical island at the center of a divides roadway separating traffic flows.
median island
60
it is designed to control and direct traffic movent, usually turning.
channelizing island
61
as a minimum requirement for bridge projects, ___ bored pile(s) shall be tested representing each pile size.
1
62
for buildings, at least ____ of the total number of bored piles shall be tested.
5%
63
as per BP 344, handrails attached to walls should have a clearance no less than 50mm from the wall and handrails on ledges should have a clearance not less than ____.
40mm
64
what is the minimum raised height required for signages/symbols labeling public rooms and places?
1 mm
65
to guide the blind, sidewalks should as much as possible follow straight forward routes with
right
66
what is the minimum width of the refuge island and its total length?
1.5m, 30m
67
the refuge island shall be provided in roadways having clear carriageway width of at least ___ lanes.
4
68
what is the flood flow velocity criteria in designing slope protection works?
3m/sec
69
what is the minimum desirable length of turnouts, unloading and loading bays, on national roads?
60m
70
what is the maximum length of turnouts, unloading and loading bays, on national roads?
185m
71
if the actual soil bearing capacity of school building did not meet the required 96 kpa soil bearing capacity, the implementing office may opt to perform / use the following except one:
H-piles
72
what is the width of the stop line in urban roads?
450mm
73
what is the width of the stop line in rural roads?
600mm
74
when using reclaimed asphalt pavement (RAP) as partial replacement to coarse aggregate in hot-mix asphalt (HMA), what is the maximum % for item 310 grading D and grading B?
25%, 40%
75
if the actual condition of the soil in school building is susceptible to liquefaction, ground improvement technique may be performed except one;
none of the above
76
the minimum bridge carriageway width for tourism roads
6.70m
77
the minimum bridge carriageway width for 5.0m width-farm to market roads
5.60m
78
the minimum bridge carriageway width for 6.1m width-farm to market roads
6.70m
79
what is the flood frequency used in hydraulic analysis for bridge design?
50 yrs
80
for pre-cast concrete curb and gutter, minimum curb inlet interval (D) is ___ in flooded areas and ___ in other areas.
10m, 20m
81
for multi-span bridges, pile bearing capacity test shall be conducted ___ at each abutment and 1 at every other pier
1
82
pile integrity test shall be conducted on at least ___ of the total number of bored piles at each abutment and pier of bridges or at the entire foundation area of buildings.
50%
83
cross hole sonic logging test (CSL) is recommended for bored piles with embedded length of more than ___.
30m
84
what is the minimum width of a curb cut-out?
0.90m
85
when the AADT is greater than ___ vehicles, paving of shoulder is necessary
1,250
86
minimum distance between two consecutive pedestrian refuge islands along the highway shall not be less than ___ meters
500m
87
what is the navigable clearance of a bridge over navigable waterways with the given data: HWL=15m AND HV=10m
26m
88
if the length and width of the drainage area is equal to 50m and 100m respectively; what should be the length of the channel?
136.8m
89
compute the amount of liquidated damages (LD) given the following data:
Remaining scope of work amount is Php1,000,000.00 and the contractor completed the remaining scope of work in 15 CD time.
Php 15,000.00
90
defects liability period
1 yr
91
as per RA 11058, the general contractor must provide one (1) construction safety and health officer for every ___ units of heavy equipment assigned to the project site to oversee the effective compliance with the COSH program
10 units
92
what is the maximum gradient for curb cut-outs?
1:12
93
as per BP 344 requirements, what is the walking speed design on the crossings?
0.90m/sec
94
what is the length of tangent between reverse curves for both tourism and farm to market roads?
30m
95
for roadway obstructions, such as bridge piers, what is the width of the black and white stripes on the object markings?
300m
96
for roadway obstructions markings, what is the minimum width of the black and white strips on the object markings?
100mm
97
what is the maximum gradient for sidewalk as per BP 344?
1:20
98
for raised median island, planting of trees should not be permitted on high speed multilane divided highway and the surface level of soil fill shall be lower than the top of island-50mm for island height less than or equal to ___ and 10mm for island height greater than ___
0.45m
99
the pavement thickness of turnout, unloading and loading bays, shall in no case be less than ___ for asphalt and 230mm for concrete with supporting base layers
100mm
100
during road re-blocking works, holes of ___ diameter and spaced at 300mm shall be drilled at 1/2 of the existing concrete pavement thickness to permit the load transfer transverse construction joints.
26mm