compre set 1
問題一覧
1
topographic/hydrographic survey of river channel and flood plains upstream and downstream of the bridge site a distance 5 times the width of the river channel or at least?
100-200m
2
in accordance with the requirements of Geotechnical Investigation, what is the minimum number of boring shall be provided for piers or abutments over 30m wide?
2
3
for school buildings, all slab reinforcements shall be ___ clear minimum from bottom and top of slab
20mm
4
for school bldngs, camber all beams and girder at least 6mm for every ___ of span, excepr cantilevers for which the camber shall be as noted in plans but no case less than 20mm for every ___ span
4.5m,3m
5
for school bldngs, all embedded pipes for utilities etc that pass thru beams shall not exceed ___ in diameter or 1/3 beam depth whichever is less
100mm
6
lateral forces on building frame can be analyzed by approximate analytical methods, except one:
moment distribution method
7
what is the maximum free height of the PVC sheet pile for revetments to limit potential deflection?
2m
8
what method is usually adopted when there is no visible evidence of termite infestation during soil poisoning?
cordoning
9
what method is usually adopted when there is visible evidence of termite infestation during soil poisoning?
drenching
10
for buildings, what is the maximum of number of borehole for every 200sqm of the structure?
1
11
warranty period for permanent structures as per ra9184?
15yrs
12
what is the minimum vertical clearance above road carriageway for flyovers, bridges, and railways?
5.03m
13
what is the minimum vertical clearance above road carriageway for pedestrian footbridges?
5.33m
14
the minimum headroom between the pedestrian walking surface and bottom of girder of the structure like railway, flyover, and bridge above shall be ___.
2m
15
variation order should not exceed ____ of the original contract price.
10%
16
what is issued to the contractor by the DPWH to cover any increase / decrease on quantities of original work items in the contract?
change order
17
timeframe for the processing of variation orders from the preparation up to the approval by the procuring entity concerned shall not exceed ___ calendar days.
30
18
advance payment to the contractor in an amount not to exceed ___ of the total original contract amount.
15%
19
what is the periodic payment for contractors progress billing?
once a month
20
withholding vat for progress billings of the contractor shall be?
5%
21
the procuring entity shall retain from each progress payment ___ of such payment, reffered to as the "retention money."
10%
22
once the project reaches an accomplisent of ___ of the total contract amount, the procuring entity may create an inspectorate team to make preliminary inspection and submit a punch-lidt to the contractor in preparation for the final turnover of the project.
95%
23
Total amount of liquidated damages shall be deducted to the ___.
final billing
24
contract time extension may be granted only when the affected activities fall within the ___ of the PERT/CPM or PDM network
critical path
25
it reflects accomplishment duration relationship in the project.
catch up schedule
26
it is the graphical representation of the cumulative monthly cash flow of the project overvits time duration.
s curve
27
it is the difference between the targeted accomplishment and the actual accomplishment at the end of a certain period, it is expressed in percentage and indicates the performance of project implementation
time slippage
28
one eligibility requirement for contractors is to be a Filipino Citizen or at least ___ Filipino owned partnership or corporation
60%
29
defective works in a project should be brought to the attention of the contractor by the resident engineer thru:
site instruction
30
what is the designed life span of permanent bridges before it is being replaced?
50 yrs
31
what do you call the distance between two intermediate supports of bridges?
span length
32
what do you call the clearance between the Design Flood Level (DFL) or the Maximum Experienced Flood Level(MEFL) and the (soffit) of the lowest member of the bridge superstructure?
freeboard
33
this is very suitable for shallow foundation and for areas wherein the hard strata lie 3m below the NGL for firm materials and 5m below the NGL for soft materials
spread footing
34
which of the following is NOT a type of Caisson Foundation?
close
35
this is equal to the tip elevation minus the "cutoff elevation" or bottom elevation of the Pile cap
driven length
36
what is the maximum allowed span length for reinforced concrete girder?
24m
37
which of the ff is not a type of bridge superstructure
abutment
38
what is the suggested type of prestressed girder to be used when the span length is about 35m?
type 6
39
what is the suggested type of prestressed girder to be used when the span length is about 18m?
type 3
40
what is the maximum jacking force for pre-stressed girders?
85%
41
which of the following is not a type of steel deck used on bridge?
close panel
42
this is a method of determining stream discharge by measuring the cross-sectional area of the streamvand its velocity with a current meter.
velocity-area
43
MELF means maximum ___ Flood Level
experienced
44
which of the ff is not a type of flood control?
spear dike
45
Dike height=freeboard+____
DFL
46
revetment are structures constructed ____ to the flow of the river.
parallel
47
generally, what is the minimum freeboard allowance above the MELF and DFL of revetments?
0.60m
48
if the height of the revetment is more than ___, berm (banquette) must be provided to separate thr revetment into segments, for stability and maintenance/patrolling purposes.
5m
49
minimum overall thickness should be ___ for all types of revetment, except for reinforced concrete type.
300mm
50
what is the maximum length of spur dike?
100m
51
what do you call the scouring of bet material due to increased stream sediment transport capacity that results from an increase in the energy gradient?
degradation
52
groundsills are structures constructed ____ to the flow of the river.
perpendicular
53
this is a kind of cut-off channel veing constructed to carry 10% of a river discharge, and which subsequently develops capacity of up to 40%
pilot channel
54
for creeks in urban and rural areas and not subject to overbank flows, a minimum easement to be provided measured from the edge of the existing bank or the improved bank should be ___.
4.5m
55
rivers, esteros and navigating canals, not subject to overbank flows should have a minimum easement measured from the edge of the existing bank or the improved bank of ___
5.5m
56
from the time of peoject was bid to the issuance of notice to proceed, ____ calendar days is required for a project to be entitled to contract price adjustment.
120
57
this is where the computation of contract price escalation of a project that is awarded thru public bidding should be based and reckoned.
date of bidding
58
this is where the computation of contract price escalation of a project that is awarded thru simplified bidding should be based and reckoned.
approval of the contract
59
in horizontal alignment of roads and highways, what is maximum the algebraic difference of cross-over?
7%
60
for roads and highways, what is minimum recommended width of curve widening?
0.6m
61
what is the minimum diameter size of pipe culverts?
910mm
62
what is the minimum length of the radius of horizontal curve for PCCP on farm2market roads?
30m
63
what is the minimum thickness of PCCP on farm2market roads?
200mm
64
what is the minimum width of PCCP on farm2market roads per lane with average daily traffic less than 200?
2.50m
65
what is the minimum width of PCCP on national highways per lane?
3.35m
66
what is the minimum depth of roadside channel from the bottom of pavement?
600mm
67
what is the cross slope of the higher shoulder for roads and highways when the superelevation is 5%
-2%
68
what is the cross slope of the higher shoulder for roads and highways when the super elevation is 4%?
-3%
69
for effective drainage, the slope of edge of pavement shall be less than or equal to ___ between +-1.5% grade
0.3%
70
for service load design of bridges, what is the flexural stress in the extreme fiber stress in compression?
0.4f'c
71
what is the maximum height of brisge abutment?
15m
72
in urban area, what is minimum bridge pedestrian width?
1200mm
73
in rural area, what is minimum brisge pedestrian width?
750mm
74
qhat is the durometer hardness for elastomeric bearing pads which is 100% virgin chloroprene (neoprene) pads?
60
75
what is the minimum vertical clearance above road carriageway for vehicles?
4.88m
76
as per RA 9184, RULE XIX, section 62, what is the warranty period for semi-permanent structures or building types 1,2 and 3?
5yrs
77
what is the minimum end laps for prepainted steel roofing sheets?
150mm
78
for combination of bored/steel sheet pile for bank protection, what is the minimum N-value capable developing the required ultimate bearing capacity?
20
79
statement: splicing of pvc sheet piles for revetments shall be allowed.
false
80
every buildng will be designed lateral seismic forces. as a minimum, the design base shear (V=ZICW/Rw)vwill be applied to the structure and be distributed to the various levels of the structure. the factor Z (seismicity of the site) as used in the philippines is ___.
0.4 for zone 4
81
statement: no pipes shall be allowed to pass thru beams of school bldngs vertically
true
82
statement: no pipes shall be embedded in columns of the school bldngs
true
83
the spacing of the bars at the column strips for school building shall not be more than ___ slab thickness.
1 1/2
84
what is the validity/renewal period of the project engineer accreditation
3 yrs
85
the implementation of this contractor's project engineer accreditation shall take effect on ___
jan 2024
86
for roads and highways, what is minimum recommended width of curve widening?
0.6m
87
in an emergency, the head of the procuring entity may authorize a variation order beyond 10% but not more than ___ of the original contract price following the guidelines determined by governemnt procurement policy board (GPPD)
20%
88
processing of advance payment shall require that minimum of ___ of the scope of work should be workable or free from obstructions.
30%
89
during interim billing, contracts with amount of more than 100million can file a progress billing up to ___ contracts that are below 100 million can only file up to ___ of the contract amount.
95%,90%
90
in no case however, shall the total sum of liquidated damages exceed ___ of the contract price, in which event the contract shall be automatically be taken over by the procuring entity concerned or can be awarded to same qualified contractor through negotiated contract.
10%
91
statement: when a contract is not mutually terminated, the contractor is still allowed to submit bids.
false
92
who is the approving official for Work suspension Order (WSO) when the suspension period is up to 60CD?
DE
93
who is the approving official for work suspension order(WSO) when the suspension period is beyond 60CD?
RD
94
early warning stage happens when the negative slippage of the project accomplishment is ___
5%
95
terminal stage happens when the negative slippage of the project accomplishment is ____
15%
96
ICU. stage happens when the negative slippage of the project accomplishment is ___
10%
97
during bidding, the bidder may sub-contract a material or significant portion of the goods which must bot exceed ___ of the contract price.
20%
98
the BAC shall determine to its satisfaction whether the bidder that is evaluated as having submitted the ____ complies with and is responsive to all the requirements and conditions
lowest calculated bid
99
what do you call the process of compressing the duration of a project in PERT CPM/PDM
crashing
100
what do you call the overlap between the first and second activity in PERT CPM/PDM
lead time
module 2
module 2
Wilson Angelo Oraza · 259問 · 2年前module 2
module 2
259問 • 2年前module 3
module 3
Wilson Angelo Oraza · 107問 · 2年前module 3
module 3
107問 • 2年前module 4
module 4
Wilson Angelo Oraza · 59問 · 2年前module 4
module 4
59問 • 2年前item #
item #
Wilson Angelo Oraza · 25問 · 2年前item #
item #
25問 • 2年前compre set 3
compre set 3
Wilson Angelo Oraza · 100問 · 2年前compre set 3
compre set 3
100問 • 2年前compre set 4
compre set 4
Wilson Angelo Oraza · 50問 · 2年前compre set 4
compre set 4
50問 • 2年前問題一覧
1
topographic/hydrographic survey of river channel and flood plains upstream and downstream of the bridge site a distance 5 times the width of the river channel or at least?
100-200m
2
in accordance with the requirements of Geotechnical Investigation, what is the minimum number of boring shall be provided for piers or abutments over 30m wide?
2
3
for school buildings, all slab reinforcements shall be ___ clear minimum from bottom and top of slab
20mm
4
for school bldngs, camber all beams and girder at least 6mm for every ___ of span, excepr cantilevers for which the camber shall be as noted in plans but no case less than 20mm for every ___ span
4.5m,3m
5
for school bldngs, all embedded pipes for utilities etc that pass thru beams shall not exceed ___ in diameter or 1/3 beam depth whichever is less
100mm
6
lateral forces on building frame can be analyzed by approximate analytical methods, except one:
moment distribution method
7
what is the maximum free height of the PVC sheet pile for revetments to limit potential deflection?
2m
8
what method is usually adopted when there is no visible evidence of termite infestation during soil poisoning?
cordoning
9
what method is usually adopted when there is visible evidence of termite infestation during soil poisoning?
drenching
10
for buildings, what is the maximum of number of borehole for every 200sqm of the structure?
1
11
warranty period for permanent structures as per ra9184?
15yrs
12
what is the minimum vertical clearance above road carriageway for flyovers, bridges, and railways?
5.03m
13
what is the minimum vertical clearance above road carriageway for pedestrian footbridges?
5.33m
14
the minimum headroom between the pedestrian walking surface and bottom of girder of the structure like railway, flyover, and bridge above shall be ___.
2m
15
variation order should not exceed ____ of the original contract price.
10%
16
what is issued to the contractor by the DPWH to cover any increase / decrease on quantities of original work items in the contract?
change order
17
timeframe for the processing of variation orders from the preparation up to the approval by the procuring entity concerned shall not exceed ___ calendar days.
30
18
advance payment to the contractor in an amount not to exceed ___ of the total original contract amount.
15%
19
what is the periodic payment for contractors progress billing?
once a month
20
withholding vat for progress billings of the contractor shall be?
5%
21
the procuring entity shall retain from each progress payment ___ of such payment, reffered to as the "retention money."
10%
22
once the project reaches an accomplisent of ___ of the total contract amount, the procuring entity may create an inspectorate team to make preliminary inspection and submit a punch-lidt to the contractor in preparation for the final turnover of the project.
95%
23
Total amount of liquidated damages shall be deducted to the ___.
final billing
24
contract time extension may be granted only when the affected activities fall within the ___ of the PERT/CPM or PDM network
critical path
25
it reflects accomplishment duration relationship in the project.
catch up schedule
26
it is the graphical representation of the cumulative monthly cash flow of the project overvits time duration.
s curve
27
it is the difference between the targeted accomplishment and the actual accomplishment at the end of a certain period, it is expressed in percentage and indicates the performance of project implementation
time slippage
28
one eligibility requirement for contractors is to be a Filipino Citizen or at least ___ Filipino owned partnership or corporation
60%
29
defective works in a project should be brought to the attention of the contractor by the resident engineer thru:
site instruction
30
what is the designed life span of permanent bridges before it is being replaced?
50 yrs
31
what do you call the distance between two intermediate supports of bridges?
span length
32
what do you call the clearance between the Design Flood Level (DFL) or the Maximum Experienced Flood Level(MEFL) and the (soffit) of the lowest member of the bridge superstructure?
freeboard
33
this is very suitable for shallow foundation and for areas wherein the hard strata lie 3m below the NGL for firm materials and 5m below the NGL for soft materials
spread footing
34
which of the following is NOT a type of Caisson Foundation?
close
35
this is equal to the tip elevation minus the "cutoff elevation" or bottom elevation of the Pile cap
driven length
36
what is the maximum allowed span length for reinforced concrete girder?
24m
37
which of the ff is not a type of bridge superstructure
abutment
38
what is the suggested type of prestressed girder to be used when the span length is about 35m?
type 6
39
what is the suggested type of prestressed girder to be used when the span length is about 18m?
type 3
40
what is the maximum jacking force for pre-stressed girders?
85%
41
which of the following is not a type of steel deck used on bridge?
close panel
42
this is a method of determining stream discharge by measuring the cross-sectional area of the streamvand its velocity with a current meter.
velocity-area
43
MELF means maximum ___ Flood Level
experienced
44
which of the ff is not a type of flood control?
spear dike
45
Dike height=freeboard+____
DFL
46
revetment are structures constructed ____ to the flow of the river.
parallel
47
generally, what is the minimum freeboard allowance above the MELF and DFL of revetments?
0.60m
48
if the height of the revetment is more than ___, berm (banquette) must be provided to separate thr revetment into segments, for stability and maintenance/patrolling purposes.
5m
49
minimum overall thickness should be ___ for all types of revetment, except for reinforced concrete type.
300mm
50
what is the maximum length of spur dike?
100m
51
what do you call the scouring of bet material due to increased stream sediment transport capacity that results from an increase in the energy gradient?
degradation
52
groundsills are structures constructed ____ to the flow of the river.
perpendicular
53
this is a kind of cut-off channel veing constructed to carry 10% of a river discharge, and which subsequently develops capacity of up to 40%
pilot channel
54
for creeks in urban and rural areas and not subject to overbank flows, a minimum easement to be provided measured from the edge of the existing bank or the improved bank should be ___.
4.5m
55
rivers, esteros and navigating canals, not subject to overbank flows should have a minimum easement measured from the edge of the existing bank or the improved bank of ___
5.5m
56
from the time of peoject was bid to the issuance of notice to proceed, ____ calendar days is required for a project to be entitled to contract price adjustment.
120
57
this is where the computation of contract price escalation of a project that is awarded thru public bidding should be based and reckoned.
date of bidding
58
this is where the computation of contract price escalation of a project that is awarded thru simplified bidding should be based and reckoned.
approval of the contract
59
in horizontal alignment of roads and highways, what is maximum the algebraic difference of cross-over?
7%
60
for roads and highways, what is minimum recommended width of curve widening?
0.6m
61
what is the minimum diameter size of pipe culverts?
910mm
62
what is the minimum length of the radius of horizontal curve for PCCP on farm2market roads?
30m
63
what is the minimum thickness of PCCP on farm2market roads?
200mm
64
what is the minimum width of PCCP on farm2market roads per lane with average daily traffic less than 200?
2.50m
65
what is the minimum width of PCCP on national highways per lane?
3.35m
66
what is the minimum depth of roadside channel from the bottom of pavement?
600mm
67
what is the cross slope of the higher shoulder for roads and highways when the superelevation is 5%
-2%
68
what is the cross slope of the higher shoulder for roads and highways when the super elevation is 4%?
-3%
69
for effective drainage, the slope of edge of pavement shall be less than or equal to ___ between +-1.5% grade
0.3%
70
for service load design of bridges, what is the flexural stress in the extreme fiber stress in compression?
0.4f'c
71
what is the maximum height of brisge abutment?
15m
72
in urban area, what is minimum bridge pedestrian width?
1200mm
73
in rural area, what is minimum brisge pedestrian width?
750mm
74
qhat is the durometer hardness for elastomeric bearing pads which is 100% virgin chloroprene (neoprene) pads?
60
75
what is the minimum vertical clearance above road carriageway for vehicles?
4.88m
76
as per RA 9184, RULE XIX, section 62, what is the warranty period for semi-permanent structures or building types 1,2 and 3?
5yrs
77
what is the minimum end laps for prepainted steel roofing sheets?
150mm
78
for combination of bored/steel sheet pile for bank protection, what is the minimum N-value capable developing the required ultimate bearing capacity?
20
79
statement: splicing of pvc sheet piles for revetments shall be allowed.
false
80
every buildng will be designed lateral seismic forces. as a minimum, the design base shear (V=ZICW/Rw)vwill be applied to the structure and be distributed to the various levels of the structure. the factor Z (seismicity of the site) as used in the philippines is ___.
0.4 for zone 4
81
statement: no pipes shall be allowed to pass thru beams of school bldngs vertically
true
82
statement: no pipes shall be embedded in columns of the school bldngs
true
83
the spacing of the bars at the column strips for school building shall not be more than ___ slab thickness.
1 1/2
84
what is the validity/renewal period of the project engineer accreditation
3 yrs
85
the implementation of this contractor's project engineer accreditation shall take effect on ___
jan 2024
86
for roads and highways, what is minimum recommended width of curve widening?
0.6m
87
in an emergency, the head of the procuring entity may authorize a variation order beyond 10% but not more than ___ of the original contract price following the guidelines determined by governemnt procurement policy board (GPPD)
20%
88
processing of advance payment shall require that minimum of ___ of the scope of work should be workable or free from obstructions.
30%
89
during interim billing, contracts with amount of more than 100million can file a progress billing up to ___ contracts that are below 100 million can only file up to ___ of the contract amount.
95%,90%
90
in no case however, shall the total sum of liquidated damages exceed ___ of the contract price, in which event the contract shall be automatically be taken over by the procuring entity concerned or can be awarded to same qualified contractor through negotiated contract.
10%
91
statement: when a contract is not mutually terminated, the contractor is still allowed to submit bids.
false
92
who is the approving official for Work suspension Order (WSO) when the suspension period is up to 60CD?
DE
93
who is the approving official for work suspension order(WSO) when the suspension period is beyond 60CD?
RD
94
early warning stage happens when the negative slippage of the project accomplishment is ___
5%
95
terminal stage happens when the negative slippage of the project accomplishment is ____
15%
96
ICU. stage happens when the negative slippage of the project accomplishment is ___
10%
97
during bidding, the bidder may sub-contract a material or significant portion of the goods which must bot exceed ___ of the contract price.
20%
98
the BAC shall determine to its satisfaction whether the bidder that is evaluated as having submitted the ____ complies with and is responsive to all the requirements and conditions
lowest calculated bid
99
what do you call the process of compressing the duration of a project in PERT CPM/PDM
crashing
100
what do you call the overlap between the first and second activity in PERT CPM/PDM
lead time