Implement consisting of long, flat and curved teeth made of spring steel.

Type of field cultivator wherein main frame is mounted on the front of the tractor.

Machine designed for transplanting rice seedlings into a puddled and leveled field.

Total force parallel to the direction of travel required to move the implement.

Based on PAES 117: 2000 small engine – methods of test, how many hours shall the engine run continuously with continuous speed and power specified by the manufacturer.

Implement performing shallow post-plant tillage to aid the crop by loosening the soil and/or by mechanical eradication of undesired vegetation

Implement consisting of tool bars that extend across the top of the rows, which allow lateral adjustments of the tools for different row spacing.

Implement consisting of tool bars that drop down between the rows to provide maximum vertical clearance for the plants.

Based on PAES Walking-type Agricultural Tractor (rotary tilling-type), the noise emitted by the tractor measured 50 mm away from the operator’s ear level shall not be more than?

Soil-handling implements which forms uniform ridges of soil to predetermined shapes

Soil-working tool,consisting of an edge and a surface,which is primarily designed to cut through the soil

Circular,flat,tool used to cut plant materials and soil

Force to propel an implement in the direction of travel which is equal and opposite to drawbar pull

Portion of an implement designed to connect the implement to a power source

Miniature plow attachment whose purpose is to turn over a small furrow slice directly ahead of the main moldboard plow bottom,to aid in covering trash

Soil profile modified by tillage or amendments for use by plant roots

PAES 124:2002 Walking-type agricultural tractor part 3:Special type (Float-assist tiller),what is the recommended peak transmission efficiency of the tractor

Part of the soil profile exploited by the roots of plants

Soil zone which affects germination and emergence of seeds

Based on Paes118:2001 four wheel tractor,the tractor shall be able to pull field implements up to what speed?

Tillage in which a narrow curved shank is used

Components of the power sprayer used to regulate the pressure

Type of force type hand pump that discharges water only on the forward stroke of the piston of plunger and draw in water into the cylinder during the back stroke

Type of power sprayer mounted on wheels either pushed by an operator or towed by a vehicle.The pump can be powered by an engine or an electric motor

sugarcane stalks containing buds used as planting mat

based on paes 119: 2001 four wheel tractor method of test, what is the recommended noise emitted by the tractor measured 50 mm away from the operator's ear level

operation which pulverizes, smoothen, and make the soil ready for planting

based on paes 132: 2004 disc/mold board plow-method of test, what is the required traveling speed during operation for two-wheel tractor-drawn plows

operation wherein a lister is used in a manner that forms a furrow midway between two previous rows of plant

plow bottom that has less curvature than the stubble and can be used easily for stubble ordinary trash and stalk cover land

plow bottom that has long, narrow and less sloping mold board with a gradual twist that allows complete inversion of the furrow slice with minimum breakage

Plow bottom that has long narrow and less sloping mold board with a gradual twist that allows complete inversion of the furrow slice with minimum breakage

What type of field operation pattern?

type of plow mounted on the tractors three point linkage and depend upon the tractor for its general operation

type of plow hitched to the drawbar or lower links of the tractor, supported by two or three wheels and equipped with hydraulic lines and cylinders for lifting and/or depth control

based on paes 112:2000 lever-operated knapsack sprayer ,the overall weight of the sprayer with its component parts when fully loaded with water shall not exceed how many kilogram?

serves as an adaptor of the drill bit and conduit of water jet channel

a type of drilling rig in which the mode of drilling is done by using a rotating drill bit that cut and loosen the soil thus producing a hole of required diameter

a type of drilling rig in which the mode of drilling is done by alternately raising and dropping either an external weight (solid steel or wood) or the drilling stem itself ,causing the impact of the drill bit to the soil ,Thus producing a hole of required diameter.

based on paes 118:2001 four-wheel tractor ,what is the allowable wheel slip for maximum efficiency for two wheel drive tractor at tilled or soft soil.

a type of drilling rig in which the mode of drilling is done by rotary action and percussion

type of hand pump intended for use in lifting water from low-head cisterns and wells, the depth of which is not beyond the head furnished by atmospheric pressure

part of granule applicator where granules are loaded

secondary tillage implement consisting of long and curved teeth made of spring steel which are fastened on the transverse toolbar with the other end pointed to give good soil penetration

four -wheel tractor speed limit on pave road in kph

based on paes 112:2000 lever-operated knapsack sprayer the flow rate from the nozzle using water and the nozzle provided ,shall lie in the range of 0.3 to 1.4 L/minute ,at what mean pressure?

tillage of an entire area as contrast to a partial tillage as in band or strip

tillage action and transport operations utilized to loosen, load, carry and unload soil

Paes 128:2002 drilling rig -method of test the drilling rig shall be operated for at least 100 mm diameter of bore hole and minimum depth of how many meters?

tillage operation which moves soil to establish a desired soil elevation and slope

tillage operation which are oriented in a specific path or directions with respect to the sun, prevailing winds previous tillage actions, or field base lines

shallow tillage operations performed to promote growth of crop plants by creating a soil condition conducive to aeration, infiltration, and moisture conservation or to pest control

mechanical manipulation of soil for any desired purpose

based on paes 124: 2002 walking type agricultural tractor- part 3: special type( float-assist tiller), what is the recommended noise emitted by the tractor measured 50 mm away from the operator's ear level

What type of field operation pattern?

tillage which constitute the initial major soil working operation normally designed to reduce soil strength cover plant materials and rearrange aggregates

tillage following primary tillage which is designed to control weeds growth and to create specific soil surface configuration before seedings

system traditionally performed in preparing a seed bed for a given crop and grown in a given geographical area

what type of field operation pattern?

system wherein least soil manipulation is performed

system in which tillage of the total soil surface is performed in such a way that plant residue is specifically left on or near the soil surface

implement which shutters the soil without complete burial or mixing of surface material

implement which cuts ,partially or completely inverts a layer of soil to bury surface materials and pulverize the soil

tool attached to the shank of the subsoiler to cut through the soil

series of hills in a field

scratching, cutting ,or abrasing of materials caused by the action of soil

lever that connects the pump rod to the pump head which often includes some mechanism to add counterweight to balance the weight of the water being lifted up to the draw pipe

part of the mist blower that connects the nozzle to the blower

part of the cylinder that is connected to the pump rod and which forces water up the draw pipe

type of sugarcane planter that is capable of chopping sugarcanes into billets which are dropped into the furrow

based on paes 118 :2001 four wheel tractor what is the allowable wheel slip for maximum efficiency for a two wheel drive tractor at firm soil

eliminates back and dead arrow and is used for surface irrigation

implement for intermittent tillage at depth sufficient to shatter compacted subsurface layer

based on paes 112: 2000 lever operated knapsack sprayer method of test, the pumping rachel not exceed how many stroke/min?

consists of two gang wherein one gang is located behind the other at an angle and the harrow is operated in an offset position in relation to the tractor

implement used for seed bed preparation which crashes soil clods and smooth and firm the soil surface

based on paes 118: 2001 four-wheel tractor, what is the allowable wheel slip for maximum efficiency for four wheel drive tractor at tilled for soft soil

what type of field operation pattern?

implement wherein the frame and cultivating tools are designed to adequately pass through standing crop rows without crop damage

machine used to apply or to apply and incorporate soil additives by means of tillage

based on paes 132: 2004 disc/ mold board plow- method of test, what is the required traveling speed during operation for four- wheel tractor- drawn plows

portion of tillage tools which are designed to be in contact with the soil

tillage tools which present a reasonable constant boundary area to the soil

scratching, cutting ,or abrading of materials caused by the action of soil

resistance to the movement of plant parts or tillage tools through soil that is caused by the mechanical strength of the soil

type of soil auger that makes use of human force to drill the soil

fine drops of liquid ,such as water or chemical pesticides, sprayed into the air

type of soil auger that is powered by either pneumatic or hydraulic pump to drill the soil

type of granule applicator designed for handheld operation. it makes use of screw or spinner plate operated manually to facilitate metering of granules

raised ridge left at the center of the strip of land, when plowing is started from center to side

trench left when the plow bottom cuts and turn the furrow slice

what type of field operation pattern?

sliding implement that cuts leaf invert and throw to one side a layer of soil (furrow slice) to bury surface materials