暗記メーカー

暗記メーカー

​
ログイン
B
67問 • 8ヶ月前
  • Blessie Fath Raneses
    • 通報

    問題一覧

  • 1

    The ratio between the numbers of weeds removed by the weeder to the tumber of weeds present per unit area.

    weeding index

  • 2

    When a machine is driven directly from the shaft of a power source, the power is transmitted using ____

    direct drive

  • 3

    If 10-Hp engine drive has a belt capacity rating of 4.5 hp per belt, how many pieces of belts are needed for the drive?

    2 to 3 belts

  • 4

    A rice thresher is to be driven by a 10-hp gasoline engine using V-belt drive. The engine speed is 1800 rpm while the thresher cylinder speed is 650 rpm. The diameter of the engine pulley is 4 inches. What will be the recommended diameter of the thresher's pulley

    11 in

  • 5

    What is the recommended belt size for the B-type V-belt needed for the drive above, if its center distance is 60 in.

    B144

  • 6

    The recommend size of the shaft for the thresher above is

    3/4 in

  • 7

    A diesel engine that operates at 2500 rpm will be used to drive an irrigation pump, which should turn at 1000 rpm. The pulley diameter for the pump is 4 inches. What is the recommended pulley diameter for the engine?

    2 in

  • 8

    The ratio between the mass of fuel consumed per unit time and the corresponding power measured

    specific fuel consumption

  • 9

    As a rule of thumb, single-phase alternating current electric motor should be used for applications requiring: 

    < 5 hp

  • 10

    The projection of cash inflow and outflow of a farm to estimate the incremental net benefit of the life of the project is known as: 

    Farm budget

  • 11

    The gearbox placed on first gear will develop…

    high torque – low speed

  • 12

     A transaction by your company this year involving the repayment in cash of a portion of the long term loan of the company in the amount of P 70,000.00 would have the following effect:

    decrease in assets = decrease in liabilities

  • 13

     It results in the reduction of the purchasing power of monetary unit.

    inflation

  • 14

    A six-bottom moldboard plow is to be used to plow a heavy soil. How many scrapers are there in the plow? 

    6

  • 15

    It is a part of the plow that connects the plow bottom and the frame.

    Shank

  • 16

    Material recommended by PAES for use as implement frame.

    Mild steel

  • 17

    Material recommended by PAES in the manufacture of disk blade.

    Carbon steel

  • 18

    When a disk harrow consists of a front and rear gangs and is centrally positioned with the tractor, it is classified as _________?

    Double action harrow

  • 19

    When a disk harrow consists of a front gang only and is centrally positioned with the tractor, it is classified as _________?

    Single action harrow

  • 20

     When a disk harrow consists of a front and/or rear gangs and is not centrally positioned with the tractor, it is classified as _________?

    Offset harrow

  • 21

    The angle between the axis of the set of disks and the line perpendicular to the direction of the implement. 

    Gang angle

  • 22

    The horizontal seed plate is used for:

    hill-drop planter

  • 23

    Planters designed to plant seeds continuously in rows with row spacing greater than 36 cm is called: 

    row-crop drill planter

  • 24

    The groundwheel of a planter is normally related to the operation of the:

    metering device

  • 25

    Part of a planter that is always present in all planters regardless of type and cropping system:

    metering device

  • 26

    Planter designed to plant seeds in rows and in hills is called:

    hill-drop planter

  • 27

    The adjustable orifice with agitator is used for

    row-crop drill planter

  • 28

    Parameter not required in the calibration of a planter is:

    ave. seed emergence

  • 29

    Planter designed to place seedlings in rows and in hills is called:

    solid drill planter

  • 30

    The IRRI drum seeder is an example of

    solid drill planter

  • 31

    Parameter not required in determining the field capacity of a planter:

    No. of seeds per hill

  • 32

     Method of pest control not considered engineering control is:

    biological control

  • 33

    Sprayers are used primarily for the application of :

    pesticides

  • 34

    Which of the following is not a spray nozzle pattern?

    hollow fan nozzle pattern

  • 35

     Operation with the highest manual labor requirement for lowland rice:

    weeding with push-type weeder

  • 36

    . Principle used in creating hydraulic energy in a lever-operated knapsack sprayer is:

    adding liquid to a container with a fixed volume of air

  • 37

    If mechanical work is done at a rate of 1 ft-lb/sec, what is its equivalent in watts?

    1.356

  • 38

     It is a self-propelled machine having a single axle designed primarily to pull and propel trailed or mounted agricultural implement and machinery.

    All of the above

  • 39

     Warranty period for hand tractor from the purchase of the machine

    6 months

  • 40

     A metal sheet with gauge number equal to 14 means___.

    14 pieces in one-inch thickness

  • 41

    The required water temperature in testing pump.

    10C-60C

  • 42

    The criteria used in evaluating the performance of a machine. 

    All of the above

  • 43

    The development of a desirable soil structure for a seedbed does not include: 

    increased water surface runoff

  • 44

    Soil cut, lifted, inverted and thrown to one side of the blow bottom is termed: 

    furrowslice

  • 45

    Bend sideward of the point of the share to make the plow cut the proper width is:

    horizontal suction

  • 46

     The angle the disc of a disc plow makes with the direction of travel to make it cut the proper width and allow it to rotate when moving forward is: 

    42 – 45 degrees

  • 47

    In the equation,C=SWEff/10,C is capacity expresses in: 

    ha/h

  • 48

    Floating power tillers are used in: 

    2-wheel tractor for wetland op.

  • 49

    The mechanical function of the planter does not include: 

    sort the seeds

  • 50

    The horizontal seed plate is used for: 

    hill-drop planter

  • 51

    Method of pest control not considered engineering control is: 

    biological control

  • 52

    Sprayers are used primarily for the application of :

    pesticides

  • 53

     Which of the following belong to the group of variable displacement pump? 

    all of the above

  • 54

    In the equation for horsepower, Hp = QxH/3960xEff,Eff is:

    efficiency of the system

  • 55

    The direct type of power transmission system has: (code 52)

    100% Eff

  • 56

    Select two consecutive farm operations which when done mechanically can increase cropping intensity: 

    harvesting – plowing

  • 57

    1 pk is equal to ____________ watts

    735.49

  • 58

    The gasoline engine is characterized as

    low first cost – high operating cost

  • 59

     The three-phase electric motor is characterized as

    low first cost – low operating cost

  • 60

    Indicates the maximum load that can be safely carried by an electric motor under continuous operation: 

    service factor

  • 61

    The piston goes up and the two valves remain closed is termed: 

    compression

  • 62

    Type of transmission system where the speed ratio depends on the teeth ratio of the two members:

    a and b

  • 63

    In a compression-ignition engine, the fuel is introduced into the cylinder at the: 

    end of compression

  • 64

    A valve operates:

    once per cycle

  • 65

    The thermal efficiency range for internal combustion engines is:

    25 – 36%

  • 66

    Type of power transmission system where clutch action is possible:

    belt and pulley

  • 67

    The gearbox placed on first gear will develop:

    high torque – low speed

    • TCEP EXAM 1

    TCEP EXAM 1

    Blessie Fath Raneses · 93問 · 1年前

    TCEP EXAM 1

    TCEP EXAM 1

    93問 • 1年前
    Blessie Fath Raneses

    Tcep exam 2

    Tcep exam 2

    Blessie Fath Raneses · 90問 · 1年前

    Tcep exam 2

    Tcep exam 2

    90問 • 1年前
    Blessie Fath Raneses

    exam 3

    exam 3

    Blessie Fath Raneses · 99問 · 1年前

    exam 3

    exam 3

    99問 • 1年前
    Blessie Fath Raneses

    GIS nga

    GIS nga

    Blessie Fath Raneses · 7問 · 1年前

    GIS nga

    GIS nga

    7問 • 1年前
    Blessie Fath Raneses

    PAES 100

    PAES 100

    Blessie Fath Raneses · 28問 · 1年前

    PAES 100

    PAES 100

    28問 • 1年前
    Blessie Fath Raneses

    definitions

    definitions

    Blessie Fath Raneses · 90問 · 1年前

    definitions

    definitions

    90問 • 1年前
    Blessie Fath Raneses

    FIGURES

    FIGURES

    Blessie Fath Raneses · 22問 · 1年前

    FIGURES

    FIGURES

    22問 • 1年前
    Blessie Fath Raneses

    exam 10

    exam 10

    Blessie Fath Raneses · 29問 · 1年前

    exam 10

    exam 10

    29問 • 1年前
    Blessie Fath Raneses

    structure

    structure

    Blessie Fath Raneses · 24問 · 1年前

    structure

    structure

    24問 • 1年前
    Blessie Fath Raneses

    EDSIR

    EDSIR

    Blessie Fath Raneses · 5問 · 11ヶ月前

    EDSIR

    EDSIR

    5問 • 11ヶ月前
    Blessie Fath Raneses

    AREA 2

    AREA 2

    Blessie Fath Raneses · 206問 · 10ヶ月前

    AREA 2

    AREA 2

    206問 • 10ヶ月前
    Blessie Fath Raneses

    edsir

    edsir

    Blessie Fath Raneses · 78問 · 10ヶ月前

    edsir

    edsir

    78問 • 10ヶ月前
    Blessie Fath Raneses

    HASSANAL-BASRI

    HASSANAL-BASRI

    Blessie Fath Raneses · 99問 · 10ヶ月前

    HASSANAL-BASRI

    HASSANAL-BASRI

    99問 • 10ヶ月前
    Blessie Fath Raneses

    Omar def

    Omar def

    Blessie Fath Raneses · 33問 · 10ヶ月前

    Omar def

    Omar def

    33問 • 10ヶ月前
    Blessie Fath Raneses

    ALTHANI

    ALTHANI

    Blessie Fath Raneses · 100問 · 10ヶ月前

    ALTHANI

    ALTHANI

    100問 • 10ヶ月前
    Blessie Fath Raneses

    OMAR

    OMAR

    Blessie Fath Raneses · 69問 · 10ヶ月前

    OMAR

    OMAR

    69問 • 10ヶ月前
    Blessie Fath Raneses

    APS-APPAL

    APS-APPAL

    Blessie Fath Raneses · 100問 · 10ヶ月前

    APS-APPAL

    APS-APPAL

    100問 • 10ヶ月前
    Blessie Fath Raneses

    問題一覧

  • 1

    The ratio between the numbers of weeds removed by the weeder to the tumber of weeds present per unit area.

    weeding index

  • 2

    When a machine is driven directly from the shaft of a power source, the power is transmitted using ____

    direct drive

  • 3

    If 10-Hp engine drive has a belt capacity rating of 4.5 hp per belt, how many pieces of belts are needed for the drive?

    2 to 3 belts

  • 4

    A rice thresher is to be driven by a 10-hp gasoline engine using V-belt drive. The engine speed is 1800 rpm while the thresher cylinder speed is 650 rpm. The diameter of the engine pulley is 4 inches. What will be the recommended diameter of the thresher's pulley

    11 in

  • 5

    What is the recommended belt size for the B-type V-belt needed for the drive above, if its center distance is 60 in.

    B144

  • 6

    The recommend size of the shaft for the thresher above is

    3/4 in

  • 7

    A diesel engine that operates at 2500 rpm will be used to drive an irrigation pump, which should turn at 1000 rpm. The pulley diameter for the pump is 4 inches. What is the recommended pulley diameter for the engine?

    2 in

  • 8

    The ratio between the mass of fuel consumed per unit time and the corresponding power measured

    specific fuel consumption

  • 9

    As a rule of thumb, single-phase alternating current electric motor should be used for applications requiring: 

    < 5 hp

  • 10

    The projection of cash inflow and outflow of a farm to estimate the incremental net benefit of the life of the project is known as: 

    Farm budget

  • 11

    The gearbox placed on first gear will develop…

    high torque – low speed

  • 12

     A transaction by your company this year involving the repayment in cash of a portion of the long term loan of the company in the amount of P 70,000.00 would have the following effect:

    decrease in assets = decrease in liabilities

  • 13

     It results in the reduction of the purchasing power of monetary unit.

    inflation

  • 14

    A six-bottom moldboard plow is to be used to plow a heavy soil. How many scrapers are there in the plow? 

    6

  • 15

    It is a part of the plow that connects the plow bottom and the frame.

    Shank

  • 16

    Material recommended by PAES for use as implement frame.

    Mild steel

  • 17

    Material recommended by PAES in the manufacture of disk blade.

    Carbon steel

  • 18

    When a disk harrow consists of a front and rear gangs and is centrally positioned with the tractor, it is classified as _________?

    Double action harrow

  • 19

    When a disk harrow consists of a front gang only and is centrally positioned with the tractor, it is classified as _________?

    Single action harrow

  • 20

     When a disk harrow consists of a front and/or rear gangs and is not centrally positioned with the tractor, it is classified as _________?

    Offset harrow

  • 21

    The angle between the axis of the set of disks and the line perpendicular to the direction of the implement. 

    Gang angle

  • 22

    The horizontal seed plate is used for:

    hill-drop planter

  • 23

    Planters designed to plant seeds continuously in rows with row spacing greater than 36 cm is called: 

    row-crop drill planter

  • 24

    The groundwheel of a planter is normally related to the operation of the:

    metering device

  • 25

    Part of a planter that is always present in all planters regardless of type and cropping system:

    metering device

  • 26

    Planter designed to plant seeds in rows and in hills is called:

    hill-drop planter

  • 27

    The adjustable orifice with agitator is used for

    row-crop drill planter

  • 28

    Parameter not required in the calibration of a planter is:

    ave. seed emergence

  • 29

    Planter designed to place seedlings in rows and in hills is called:

    solid drill planter

  • 30

    The IRRI drum seeder is an example of

    solid drill planter

  • 31

    Parameter not required in determining the field capacity of a planter:

    No. of seeds per hill

  • 32

     Method of pest control not considered engineering control is:

    biological control

  • 33

    Sprayers are used primarily for the application of :

    pesticides

  • 34

    Which of the following is not a spray nozzle pattern?

    hollow fan nozzle pattern

  • 35

     Operation with the highest manual labor requirement for lowland rice:

    weeding with push-type weeder

  • 36

    . Principle used in creating hydraulic energy in a lever-operated knapsack sprayer is:

    adding liquid to a container with a fixed volume of air

  • 37

    If mechanical work is done at a rate of 1 ft-lb/sec, what is its equivalent in watts?

    1.356

  • 38

     It is a self-propelled machine having a single axle designed primarily to pull and propel trailed or mounted agricultural implement and machinery.

    All of the above

  • 39

     Warranty period for hand tractor from the purchase of the machine

    6 months

  • 40

     A metal sheet with gauge number equal to 14 means___.

    14 pieces in one-inch thickness

  • 41

    The required water temperature in testing pump.

    10C-60C

  • 42

    The criteria used in evaluating the performance of a machine. 

    All of the above

  • 43

    The development of a desirable soil structure for a seedbed does not include: 

    increased water surface runoff

  • 44

    Soil cut, lifted, inverted and thrown to one side of the blow bottom is termed: 

    furrowslice

  • 45

    Bend sideward of the point of the share to make the plow cut the proper width is:

    horizontal suction

  • 46

     The angle the disc of a disc plow makes with the direction of travel to make it cut the proper width and allow it to rotate when moving forward is: 

    42 – 45 degrees

  • 47

    In the equation,C=SWEff/10,C is capacity expresses in: 

    ha/h

  • 48

    Floating power tillers are used in: 

    2-wheel tractor for wetland op.

  • 49

    The mechanical function of the planter does not include: 

    sort the seeds

  • 50

    The horizontal seed plate is used for: 

    hill-drop planter

  • 51

    Method of pest control not considered engineering control is: 

    biological control

  • 52

    Sprayers are used primarily for the application of :

    pesticides

  • 53

     Which of the following belong to the group of variable displacement pump? 

    all of the above

  • 54

    In the equation for horsepower, Hp = QxH/3960xEff,Eff is:

    efficiency of the system

  • 55

    The direct type of power transmission system has: (code 52)

    100% Eff

  • 56

    Select two consecutive farm operations which when done mechanically can increase cropping intensity: 

    harvesting – plowing

  • 57

    1 pk is equal to ____________ watts

    735.49

  • 58

    The gasoline engine is characterized as

    low first cost – high operating cost

  • 59

     The three-phase electric motor is characterized as

    low first cost – low operating cost

  • 60

    Indicates the maximum load that can be safely carried by an electric motor under continuous operation: 

    service factor

  • 61

    The piston goes up and the two valves remain closed is termed: 

    compression

  • 62

    Type of transmission system where the speed ratio depends on the teeth ratio of the two members:

    a and b

  • 63

    In a compression-ignition engine, the fuel is introduced into the cylinder at the: 

    end of compression

  • 64

    A valve operates:

    once per cycle

  • 65

    The thermal efficiency range for internal combustion engines is:

    25 – 36%

  • 66

    Type of power transmission system where clutch action is possible:

    belt and pulley

  • 67

    The gearbox placed on first gear will develop:

    high torque – low speed