問題一覧
1
PAES 401 (housing for swine Production: The space requirements per animal m2/animal for adult pigs in groups.
2.5
2
Based on PAES: 401 (housing for swine Production: Recommended lighting intensity for swine housing for Inspection areas
200 Lux
3
Based on PAES 411:2000, The slaughterhouse shall be located far from any building used for human habitation, and from any factory, public road or public place ______and should be free from dust, odor, smoke, and other contaminants.
at least 200 meters
4
PAES 401:2001 (Housing for Swine Production): Artificial lighting shall always be available for use during the night or darkened periods of the day. What shall be the lighting intensity to be provided for Breeding, gestation and farrowing area?
150 lux
5
Based on PAES 419: 2000, Agricultural Structures- Warehouse for bagged storage of Grains, Recommended dimensions of warehouse based on capacity what is the recommended structure dimensions of warehouse based on 10,000 cavan capacity?
10 m × 30 m
6
In PAES 419 - Warehouse for Bagged Storage of Grains, this system of stacking provides ventilation space between bags and allows circulation of convective air.
Japanese method
7
PAES 419:2015 (Warehouse for Bagged Storage of Grains): The standard pallet size should be:
152 cm × 61 cm
8
In PAES 414-2:2002 - Waste Management Structures, the percent moisture content that should be maintained to nourish the composting bacteria
50 -60 %
9
Based on PAES 415:2001 what is the minimum aisle width required for determinate crops on the walkway?
0.30 m
10
Based on PAES 415:2001 what is the minimum aisle width required for indeterminate crops on the walkway?
0.80 m
11
Based on PABES 289:2019: From farm to market road design requirement as of 2014: for slide slope ratio (H:V) what is the minimum fill slope?
1.5:1
12
Based on PABES 289:2019: The typical width of farm-to- market road for a two-lane roadway.
5 m
13
Based on PABES 289:2019(FMR) What is the minimum width of sidewalks designed to allow two people to pass?
1.8m
14
Based on PABES 289:2019 (FMR) In lower-speed residential areas, what is the allowable range for sidewalk widths?
1.2 m to 2.4 m
15
Based on PABES 289:2019(FMR) For sidewalks less than 1.5 m wide, how frequently must a passing section be provided to ensure accessibility?
every 60 m
16
Based on PABES 289:2019(FMR) What is the maximum
allowable cross slope for sidewalks to accommodate persons
with disabilities?
2%
17
PAES 421:2009 (Farm to Market Roads): For concrete road, the maximum slope of road shoulder from the edge of the road carriageway shall be?
4%
18
PAES 421:2009 (Farm to Market Roads): For earth, gravel and bituminous roads, the minimum slope from the center line towards the ditch shall be?
3%
19
PAES 421:2009 (Farm to Market Roads): Culverts and storm drains have ideal slope of 2-4%. What is the absolute minimum slope for culverts and storm drains?
0.5%
20
Based on PAES 421 2009 (Farm to Market Road) In Constructions requirements of bituminous road the bituminous liquid requirement temperature shall be____
180°C
21
It is a system of grading the performance of a constructor for a specific kind of projects using a set of criteria, approved by the NEDA-INFRACOM.
Constructors performance evaluation system(CPES)
22
A plan of action proposed by the constructor to the concerned agency's implementing office which is aimed to correct the non-conformance findings on the project based.
Corrective Action Plan (CAP)
23
An individual or group of evaluators accredited by CIAP tasked to undertake performance evaluation of constructor's project.
Constructor Performance Evaluators (CPE)
24
A request form wherein the CPE records his/her validated finding(s) including corresponding location(s) which do not conform to any of the checklist indicators requiring immediate actions by the constructor.
Corrective Action Request (CAR)
TCEP EXAM 1
TCEP EXAM 1
Blessie Fath Raneses · 93問 · 1年前TCEP EXAM 1
TCEP EXAM 1
93問 • 1年前Tcep exam 2
Tcep exam 2
Blessie Fath Raneses · 90問 · 1年前Tcep exam 2
Tcep exam 2
90問 • 1年前exam 3
exam 3
Blessie Fath Raneses · 99問 · 1年前exam 3
exam 3
99問 • 1年前GIS nga
GIS nga
Blessie Fath Raneses · 7問 · 1年前GIS nga
GIS nga
7問 • 1年前PAES 100
PAES 100
Blessie Fath Raneses · 28問 · 1年前PAES 100
PAES 100
28問 • 1年前definitions
definitions
Blessie Fath Raneses · 90問 · 1年前definitions
definitions
90問 • 1年前FIGURES
FIGURES
Blessie Fath Raneses · 22問 · 1年前FIGURES
FIGURES
22問 • 1年前exam 10
exam 10
Blessie Fath Raneses · 29問 · 1年前exam 10
exam 10
29問 • 1年前EDSIR
EDSIR
Blessie Fath Raneses · 5問 · 11ヶ月前EDSIR
EDSIR
5問 • 11ヶ月前AREA 2
AREA 2
Blessie Fath Raneses · 206問 · 10ヶ月前AREA 2
AREA 2
206問 • 10ヶ月前edsir
edsir
Blessie Fath Raneses · 78問 · 10ヶ月前edsir
edsir
78問 • 10ヶ月前HASSANAL-BASRI
HASSANAL-BASRI
Blessie Fath Raneses · 99問 · 10ヶ月前HASSANAL-BASRI
HASSANAL-BASRI
99問 • 10ヶ月前Omar def
Omar def
Blessie Fath Raneses · 33問 · 10ヶ月前Omar def
Omar def
33問 • 10ヶ月前ALTHANI
ALTHANI
Blessie Fath Raneses · 100問 · 10ヶ月前ALTHANI
ALTHANI
100問 • 10ヶ月前OMAR
OMAR
Blessie Fath Raneses · 69問 · 10ヶ月前OMAR
OMAR
69問 • 10ヶ月前APS-APPAL
APS-APPAL
Blessie Fath Raneses · 100問 · 10ヶ月前APS-APPAL
APS-APPAL
100問 • 10ヶ月前問題一覧
1
PAES 401 (housing for swine Production: The space requirements per animal m2/animal for adult pigs in groups.
2.5
2
Based on PAES: 401 (housing for swine Production: Recommended lighting intensity for swine housing for Inspection areas
200 Lux
3
Based on PAES 411:2000, The slaughterhouse shall be located far from any building used for human habitation, and from any factory, public road or public place ______and should be free from dust, odor, smoke, and other contaminants.
at least 200 meters
4
PAES 401:2001 (Housing for Swine Production): Artificial lighting shall always be available for use during the night or darkened periods of the day. What shall be the lighting intensity to be provided for Breeding, gestation and farrowing area?
150 lux
5
Based on PAES 419: 2000, Agricultural Structures- Warehouse for bagged storage of Grains, Recommended dimensions of warehouse based on capacity what is the recommended structure dimensions of warehouse based on 10,000 cavan capacity?
10 m × 30 m
6
In PAES 419 - Warehouse for Bagged Storage of Grains, this system of stacking provides ventilation space between bags and allows circulation of convective air.
Japanese method
7
PAES 419:2015 (Warehouse for Bagged Storage of Grains): The standard pallet size should be:
152 cm × 61 cm
8
In PAES 414-2:2002 - Waste Management Structures, the percent moisture content that should be maintained to nourish the composting bacteria
50 -60 %
9
Based on PAES 415:2001 what is the minimum aisle width required for determinate crops on the walkway?
0.30 m
10
Based on PAES 415:2001 what is the minimum aisle width required for indeterminate crops on the walkway?
0.80 m
11
Based on PABES 289:2019: From farm to market road design requirement as of 2014: for slide slope ratio (H:V) what is the minimum fill slope?
1.5:1
12
Based on PABES 289:2019: The typical width of farm-to- market road for a two-lane roadway.
5 m
13
Based on PABES 289:2019(FMR) What is the minimum width of sidewalks designed to allow two people to pass?
1.8m
14
Based on PABES 289:2019 (FMR) In lower-speed residential areas, what is the allowable range for sidewalk widths?
1.2 m to 2.4 m
15
Based on PABES 289:2019(FMR) For sidewalks less than 1.5 m wide, how frequently must a passing section be provided to ensure accessibility?
every 60 m
16
Based on PABES 289:2019(FMR) What is the maximum
allowable cross slope for sidewalks to accommodate persons
with disabilities?
2%
17
PAES 421:2009 (Farm to Market Roads): For concrete road, the maximum slope of road shoulder from the edge of the road carriageway shall be?
4%
18
PAES 421:2009 (Farm to Market Roads): For earth, gravel and bituminous roads, the minimum slope from the center line towards the ditch shall be?
3%
19
PAES 421:2009 (Farm to Market Roads): Culverts and storm drains have ideal slope of 2-4%. What is the absolute minimum slope for culverts and storm drains?
0.5%
20
Based on PAES 421 2009 (Farm to Market Road) In Constructions requirements of bituminous road the bituminous liquid requirement temperature shall be____
180°C
21
It is a system of grading the performance of a constructor for a specific kind of projects using a set of criteria, approved by the NEDA-INFRACOM.
Constructors performance evaluation system(CPES)
22
A plan of action proposed by the constructor to the concerned agency's implementing office which is aimed to correct the non-conformance findings on the project based.
Corrective Action Plan (CAP)
23
An individual or group of evaluators accredited by CIAP tasked to undertake performance evaluation of constructor's project.
Constructor Performance Evaluators (CPE)
24
A request form wherein the CPE records his/her validated finding(s) including corresponding location(s) which do not conform to any of the checklist indicators requiring immediate actions by the constructor.
Corrective Action Request (CAR)