TestSkapare

TestSkapare

​
Logga in

c7.1

c7.1
18 frågor • 1 år sedan
  • Aljuboory
    • rapportera

    Frågelista

  • 1

    Be sure that in workshop all fuels & lubricants that have been contaminated in any way:

    must collected in containers & returned to the stores for disposal

  • 2

    It is very important when using pliers for clipping wire to hold them so that the ends of the wire:

    when snipped off are directed towards the ground . You should never use pliers to tighten or slacken nuts, bolts or screws

  • 3

    If a circuit breakers is pulled to deactivate a system , a safety tag must be attached to it to indicate this to other maintenance personnel:

    On no account should a circuit breaker be reactivated until the person who isolated it has been consulted

  • 4

    during weather radar testing :

    should be no fuelling operations in progress

  • 5

    Breathing To check if the casualty is breathing

    you must check for 10 second, look to see if the chest is rising, listen near to the face for breathing sound, and feel for a breath on the cheek

  • 6

    Class A Solid materials, usually of an organic nature

    include wood, paper, cloth, rubber and some plastic

  • 7

    Class C

    Fires involving gases or liquefied gases such as acetylene, methane and propane, etc

  • 8

    Chemical Foam fire extinguisher can use on:

    Class A & B fires only

  • 9

    In burning metals, the proper type of fire extinguisher

    is special dry powder

  • 10

    Wear cap or helmet if

    your hair is long

  • 11

    Protect your eyes when using

    drill, grinding and milling machines

  • 12

    When grinding a chisel edge on a grinding wheel

    the guard must never be removed or disabled. The slight inconvenience they cause is more than compensated for by the added safety they provide

  • 13

    It is always good practice to

    notify anyone in the immediate area prior to your work commencing

  • 14

    The guards and safety covers found on many tools have been put there to

    protect the operator

  • 15

    Dull cutting tools present

    a greater threat of injury than sharp tools since a dull or improperly sharpened tool requires excessive forces to do its job

  • 16

    Data regarding the fire and explosion hazard of any material or substance used in the hangar, as well as data about storage and handling precautions, can be found:

    in the associated material safety data sheet (MSDS)

  • 17

    When turbine engines are being ground run, there is a personal danger from :

    the intake and the exhaust

  • 18

    The maximum value of current at which a person holding live electrodes can

    let go of them is from 0.5mA – 10mA

    • mod 4 test

    mod 4 test

    Aljuboory · 81 frågor · 1 år sedan

    mod 4 test

    mod 4 test

    81 frågor • 1 år sedan
    Aljuboory

    mod 2 test

    mod 2 test

    Aljuboory · 100 frågor · 1 år sedan

    mod 2 test

    mod 2 test

    100 frågor • 1 år sedan
    Aljuboory

    mod 2,2

    mod 2,2

    Aljuboory · 94 frågor · 1 år sedan

    mod 2,2

    mod 2,2

    94 frågor • 1 år sedan
    Aljuboory

    mod 6,1

    mod 6,1

    Aljuboory · 277 frågor · 1 år sedan

    mod 6,1

    mod 6,1

    277 frågor • 1 år sedan
    Aljuboory

    c7.2

    c7.2

    Aljuboory · 11 frågor · 1 år sedan

    c7.2

    c7.2

    11 frågor • 1 år sedan
    Aljuboory

    c7.3

    c7.3

    Aljuboory · 36 frågor · 1 år sedan

    c7.3

    c7.3

    36 frågor • 1 år sedan
    Aljuboory

    c7,4

    c7,4

    Aljuboory · 20 frågor · 1 år sedan

    c7,4

    c7,4

    20 frågor • 1 år sedan
    Aljuboory

    c7.5

    c7.5

    Aljuboory · 11 frågor · 1 år sedan

    c7.5

    c7.5

    11 frågor • 1 år sedan
    Aljuboory

    c7.7

    c7.7

    Aljuboory · 17 frågor · 1 år sedan

    c7.7

    c7.7

    17 frågor • 1 år sedan
    Aljuboory

    c7.8

    c7.8

    Aljuboory · 5 frågor · 1 år sedan

    c7.8

    c7.8

    5 frågor • 1 år sedan
    Aljuboory

    c7.9

    c7.9

    Aljuboory · 8 frågor · 1 år sedan

    c7.9

    c7.9

    8 frågor • 1 år sedan
    Aljuboory

    7.10

    7.10

    Aljuboory · 12 frågor · 1 år sedan

    7.10

    7.10

    12 frågor • 1 år sedan
    Aljuboory

    c7.11

    c7.11

    Aljuboory · 6 frågor · 1 år sedan

    c7.11

    c7.11

    6 frågor • 1 år sedan
    Aljuboory

    c7.12

    c7.12

    Aljuboory · 10 frågor · 1 år sedan

    c7.12

    c7.12

    10 frågor • 1 år sedan
    Aljuboory

    c7.13

    c7.13

    Aljuboory · 10 frågor · 1 år sedan

    c7.13

    c7.13

    10 frågor • 1 år sedan
    Aljuboory

    c7.14

    c7.14

    Aljuboory · 17 frågor · 1 år sedan

    c7.14

    c7.14

    17 frågor • 1 år sedan
    Aljuboory

    c7.15

    c7.15

    Aljuboory · 20 frågor · 1 år sedan

    c7.15

    c7.15

    20 frågor • 1 år sedan
    Aljuboory

    c7.16

    c7.16

    Aljuboory · 14 frågor · 1 år sedan

    c7.16

    c7.16

    14 frågor • 1 år sedan
    Aljuboory

    c7.17

    c7.17

    Aljuboory · 14 frågor · 1 år sedan

    c7.17

    c7.17

    14 frågor • 1 år sedan
    Aljuboory

    c7.18

    c7.18

    Aljuboory · 36 frågor · 1 år sedan

    c7.18

    c7.18

    36 frågor • 1 år sedan
    Aljuboory

    c7.19

    c7.19

    Aljuboory · 11 frågor · 1 år sedan

    c7.19

    c7.19

    11 frågor • 1 år sedan
    Aljuboory

    c7.20

    c7.20

    Aljuboory · 18 frågor · 1 år sedan

    c7.20

    c7.20

    18 frågor • 1 år sedan
    Aljuboory

    Frågelista

  • 1

    Be sure that in workshop all fuels & lubricants that have been contaminated in any way:

    must collected in containers & returned to the stores for disposal

  • 2

    It is very important when using pliers for clipping wire to hold them so that the ends of the wire:

    when snipped off are directed towards the ground . You should never use pliers to tighten or slacken nuts, bolts or screws

  • 3

    If a circuit breakers is pulled to deactivate a system , a safety tag must be attached to it to indicate this to other maintenance personnel:

    On no account should a circuit breaker be reactivated until the person who isolated it has been consulted

  • 4

    during weather radar testing :

    should be no fuelling operations in progress

  • 5

    Breathing To check if the casualty is breathing

    you must check for 10 second, look to see if the chest is rising, listen near to the face for breathing sound, and feel for a breath on the cheek

  • 6

    Class A Solid materials, usually of an organic nature

    include wood, paper, cloth, rubber and some plastic

  • 7

    Class C

    Fires involving gases or liquefied gases such as acetylene, methane and propane, etc

  • 8

    Chemical Foam fire extinguisher can use on:

    Class A & B fires only

  • 9

    In burning metals, the proper type of fire extinguisher

    is special dry powder

  • 10

    Wear cap or helmet if

    your hair is long

  • 11

    Protect your eyes when using

    drill, grinding and milling machines

  • 12

    When grinding a chisel edge on a grinding wheel

    the guard must never be removed or disabled. The slight inconvenience they cause is more than compensated for by the added safety they provide

  • 13

    It is always good practice to

    notify anyone in the immediate area prior to your work commencing

  • 14

    The guards and safety covers found on many tools have been put there to

    protect the operator

  • 15

    Dull cutting tools present

    a greater threat of injury than sharp tools since a dull or improperly sharpened tool requires excessive forces to do its job

  • 16

    Data regarding the fire and explosion hazard of any material or substance used in the hangar, as well as data about storage and handling precautions, can be found:

    in the associated material safety data sheet (MSDS)

  • 17

    When turbine engines are being ground run, there is a personal danger from :

    the intake and the exhaust

  • 18

    The maximum value of current at which a person holding live electrodes can

    let go of them is from 0.5mA – 10mA