TestSkapare

TestSkapare

​
Logga in

c7.20

c7.20
18 frågor • 1 år sedan
  • Aljuboory
    • rapportera

    Frågelista

  • 1

    The word ―Check is used to describe a task to ensure that:

    a condition conforms to prescribed limits.

  • 2

    The word ―Inspect is used to describe a task which requires :

    a degree of judgement.

  • 3

    An aircraft maintenance program in an EU territory is approved by the :

    Competent authority of EASA.

  • 4

    A Bonded store is one provided to store:

    materials and parts which have been proved to conform to specification and are serviceable and approved for aircraft use.

  • 5

    To ensure continued airworthiness, each check has a mandatory Never Exceed Period (NEP). If the check is not completed by the specified time ( is exceeded )

    the Certificate of Airworthiness is invalidated and the aircraft grounded

  • 6

    A Duplicate Inspection is defined as :

    An inspection first made and certified by one qualified person and subsequently made and certified by a second qualified person.

  • 7

    Apart from the “high level” contact between the Maintenance Planners and the Operations Planners there is day-to-day contact between maintenance and operations via:

    the Technical Log.

  • 8

    The term ‘Quality Assurance’ is used to define :

    the planned actions by which the organisation can demonstrate with confidence, or guarantee, that its product or services will satisfy the quality requirements.

  • 9

    The Quality System Any approved Part-145 organisation has a quality system consisting of two parts:

    Independent audits & A quality feedback reporting system

  • 10

    Small operators and private owners may rely on a paperwork system with installation dates recorded in the:

    aircraft Log Book.

  • 11

    a schedule of maintenance checks designed to ensure continuing airworthiness of the aircraft , is called:

    Check Cycle.

  • 12

    This is performed on the ramp before every flight.

    Transit Check or Pre-Flight Check.

  • 13

    Vital points inspections are:

    components which involve duplicate inspections.

  • 14

    Vital points inspections are carried out:

    After an area is disturbed.

  • 15

    A hard time engine inspection involves:

    Replacement with a new or overhauled component.

  • 16

    A certificate of release to service must be issued after:

    A repair has been carried out in accordance with an approved repair scheme.

  • 17

    After a mandatory inspection has been carried out by a licensed engineer , what is issued:

    Certificate of release to service

  • 18

    aircraft maintenance licence shall permit the holder to issue certificates of release to service following base maintenance on aircraft.

    An category C

    • mod 4 test

    mod 4 test

    Aljuboory · 81 frågor · 1 år sedan

    mod 4 test

    mod 4 test

    81 frågor • 1 år sedan
    Aljuboory

    mod 2 test

    mod 2 test

    Aljuboory · 100 frågor · 1 år sedan

    mod 2 test

    mod 2 test

    100 frågor • 1 år sedan
    Aljuboory

    mod 2,2

    mod 2,2

    Aljuboory · 94 frågor · 1 år sedan

    mod 2,2

    mod 2,2

    94 frågor • 1 år sedan
    Aljuboory

    mod 6,1

    mod 6,1

    Aljuboory · 277 frågor · 1 år sedan

    mod 6,1

    mod 6,1

    277 frågor • 1 år sedan
    Aljuboory

    c7.1

    c7.1

    Aljuboory · 18 frågor · 1 år sedan

    c7.1

    c7.1

    18 frågor • 1 år sedan
    Aljuboory

    c7.2

    c7.2

    Aljuboory · 11 frågor · 1 år sedan

    c7.2

    c7.2

    11 frågor • 1 år sedan
    Aljuboory

    c7.3

    c7.3

    Aljuboory · 36 frågor · 1 år sedan

    c7.3

    c7.3

    36 frågor • 1 år sedan
    Aljuboory

    c7,4

    c7,4

    Aljuboory · 20 frågor · 1 år sedan

    c7,4

    c7,4

    20 frågor • 1 år sedan
    Aljuboory

    c7.5

    c7.5

    Aljuboory · 11 frågor · 1 år sedan

    c7.5

    c7.5

    11 frågor • 1 år sedan
    Aljuboory

    c7.7

    c7.7

    Aljuboory · 17 frågor · 1 år sedan

    c7.7

    c7.7

    17 frågor • 1 år sedan
    Aljuboory

    c7.8

    c7.8

    Aljuboory · 5 frågor · 1 år sedan

    c7.8

    c7.8

    5 frågor • 1 år sedan
    Aljuboory

    c7.9

    c7.9

    Aljuboory · 8 frågor · 1 år sedan

    c7.9

    c7.9

    8 frågor • 1 år sedan
    Aljuboory

    7.10

    7.10

    Aljuboory · 12 frågor · 1 år sedan

    7.10

    7.10

    12 frågor • 1 år sedan
    Aljuboory

    c7.11

    c7.11

    Aljuboory · 6 frågor · 1 år sedan

    c7.11

    c7.11

    6 frågor • 1 år sedan
    Aljuboory

    c7.12

    c7.12

    Aljuboory · 10 frågor · 1 år sedan

    c7.12

    c7.12

    10 frågor • 1 år sedan
    Aljuboory

    c7.13

    c7.13

    Aljuboory · 10 frågor · 1 år sedan

    c7.13

    c7.13

    10 frågor • 1 år sedan
    Aljuboory

    c7.14

    c7.14

    Aljuboory · 17 frågor · 1 år sedan

    c7.14

    c7.14

    17 frågor • 1 år sedan
    Aljuboory

    c7.15

    c7.15

    Aljuboory · 20 frågor · 1 år sedan

    c7.15

    c7.15

    20 frågor • 1 år sedan
    Aljuboory

    c7.16

    c7.16

    Aljuboory · 14 frågor · 1 år sedan

    c7.16

    c7.16

    14 frågor • 1 år sedan
    Aljuboory

    c7.17

    c7.17

    Aljuboory · 14 frågor · 1 år sedan

    c7.17

    c7.17

    14 frågor • 1 år sedan
    Aljuboory

    c7.18

    c7.18

    Aljuboory · 36 frågor · 1 år sedan

    c7.18

    c7.18

    36 frågor • 1 år sedan
    Aljuboory

    c7.19

    c7.19

    Aljuboory · 11 frågor · 1 år sedan

    c7.19

    c7.19

    11 frågor • 1 år sedan
    Aljuboory

    Frågelista

  • 1

    The word ―Check is used to describe a task to ensure that:

    a condition conforms to prescribed limits.

  • 2

    The word ―Inspect is used to describe a task which requires :

    a degree of judgement.

  • 3

    An aircraft maintenance program in an EU territory is approved by the :

    Competent authority of EASA.

  • 4

    A Bonded store is one provided to store:

    materials and parts which have been proved to conform to specification and are serviceable and approved for aircraft use.

  • 5

    To ensure continued airworthiness, each check has a mandatory Never Exceed Period (NEP). If the check is not completed by the specified time ( is exceeded )

    the Certificate of Airworthiness is invalidated and the aircraft grounded

  • 6

    A Duplicate Inspection is defined as :

    An inspection first made and certified by one qualified person and subsequently made and certified by a second qualified person.

  • 7

    Apart from the “high level” contact between the Maintenance Planners and the Operations Planners there is day-to-day contact between maintenance and operations via:

    the Technical Log.

  • 8

    The term ‘Quality Assurance’ is used to define :

    the planned actions by which the organisation can demonstrate with confidence, or guarantee, that its product or services will satisfy the quality requirements.

  • 9

    The Quality System Any approved Part-145 organisation has a quality system consisting of two parts:

    Independent audits & A quality feedback reporting system

  • 10

    Small operators and private owners may rely on a paperwork system with installation dates recorded in the:

    aircraft Log Book.

  • 11

    a schedule of maintenance checks designed to ensure continuing airworthiness of the aircraft , is called:

    Check Cycle.

  • 12

    This is performed on the ramp before every flight.

    Transit Check or Pre-Flight Check.

  • 13

    Vital points inspections are:

    components which involve duplicate inspections.

  • 14

    Vital points inspections are carried out:

    After an area is disturbed.

  • 15

    A hard time engine inspection involves:

    Replacement with a new or overhauled component.

  • 16

    A certificate of release to service must be issued after:

    A repair has been carried out in accordance with an approved repair scheme.

  • 17

    After a mandatory inspection has been carried out by a licensed engineer , what is issued:

    Certificate of release to service

  • 18

    aircraft maintenance licence shall permit the holder to issue certificates of release to service following base maintenance on aircraft.

    An category C