Logga in

c7.8

c7.8
5 frågor • 1 år sedan
  • Aljuboory
  • rapportera

    Frågelista

  • 1

    Using a bucking bar which is too light means that the gun

    must deliver more blows and may result in premature hardening of the rivet or damage to the skin surface

  • 2

    When removing a cherryLOCK or cherryMAX rivet

    you should first use a drill the same diameter as the pin, and remove the pin by drilling enough to remove the locking ring, then pinching out the pin with a pin punch.

  • 3

    So when using a dipper to gauge the length of a cherry rivet to be used on a riveted joint, the gauge indicates just above (-4)

    The length of rivet you should use is 5/16 inch

  • 4

    The minimum space between rivets is determined by

    the diameter of the rivets being used

  • 5

    The tool is used to cut rivets to size prior to driving:

    Rivet cutter

  • mod 4 test

    mod 4 test

    Aljuboory · 81 frågor · 1 år sedan

    mod 4 test

    mod 4 test

    81 frågor • 1 år sedan
    Aljuboory

    mod 2 test

    mod 2 test

    Aljuboory · 100 frågor · 1 år sedan

    mod 2 test

    mod 2 test

    100 frågor • 1 år sedan
    Aljuboory

    mod 2,2

    mod 2,2

    Aljuboory · 94 frågor · 1 år sedan

    mod 2,2

    mod 2,2

    94 frågor • 1 år sedan
    Aljuboory

    mod 6,1

    mod 6,1

    Aljuboory · 277 frågor · 1 år sedan

    mod 6,1

    mod 6,1

    277 frågor • 1 år sedan
    Aljuboory

    c7.1

    c7.1

    Aljuboory · 18 frågor · 1 år sedan

    c7.1

    c7.1

    18 frågor • 1 år sedan
    Aljuboory

    c7.2

    c7.2

    Aljuboory · 11 frågor · 1 år sedan

    c7.2

    c7.2

    11 frågor • 1 år sedan
    Aljuboory

    c7.3

    c7.3

    Aljuboory · 36 frågor · 1 år sedan

    c7.3

    c7.3

    36 frågor • 1 år sedan
    Aljuboory

    c7,4

    c7,4

    Aljuboory · 20 frågor · 1 år sedan

    c7,4

    c7,4

    20 frågor • 1 år sedan
    Aljuboory

    c7.5

    c7.5

    Aljuboory · 11 frågor · 1 år sedan

    c7.5

    c7.5

    11 frågor • 1 år sedan
    Aljuboory

    c7.7

    c7.7

    Aljuboory · 17 frågor · 1 år sedan

    c7.7

    c7.7

    17 frågor • 1 år sedan
    Aljuboory

    c7.9

    c7.9

    Aljuboory · 8 frågor · 1 år sedan

    c7.9

    c7.9

    8 frågor • 1 år sedan
    Aljuboory

    7.10

    7.10

    Aljuboory · 12 frågor · 1 år sedan

    7.10

    7.10

    12 frågor • 1 år sedan
    Aljuboory

    c7.11

    c7.11

    Aljuboory · 6 frågor · 1 år sedan

    c7.11

    c7.11

    6 frågor • 1 år sedan
    Aljuboory

    c7.12

    c7.12

    Aljuboory · 10 frågor · 1 år sedan

    c7.12

    c7.12

    10 frågor • 1 år sedan
    Aljuboory

    c7.13

    c7.13

    Aljuboory · 10 frågor · 1 år sedan

    c7.13

    c7.13

    10 frågor • 1 år sedan
    Aljuboory

    c7.14

    c7.14

    Aljuboory · 17 frågor · 1 år sedan

    c7.14

    c7.14

    17 frågor • 1 år sedan
    Aljuboory

    c7.15

    c7.15

    Aljuboory · 20 frågor · 1 år sedan

    c7.15

    c7.15

    20 frågor • 1 år sedan
    Aljuboory

    c7.16

    c7.16

    Aljuboory · 14 frågor · 1 år sedan

    c7.16

    c7.16

    14 frågor • 1 år sedan
    Aljuboory

    c7.17

    c7.17

    Aljuboory · 14 frågor · 1 år sedan

    c7.17

    c7.17

    14 frågor • 1 år sedan
    Aljuboory

    c7.18

    c7.18

    Aljuboory · 36 frågor · 1 år sedan

    c7.18

    c7.18

    36 frågor • 1 år sedan
    Aljuboory

    c7.19

    c7.19

    Aljuboory · 11 frågor · 1 år sedan

    c7.19

    c7.19

    11 frågor • 1 år sedan
    Aljuboory

    c7.20

    c7.20

    Aljuboory · 18 frågor · 1 år sedan

    c7.20

    c7.20

    18 frågor • 1 år sedan
    Aljuboory

    Frågelista

  • 1

    Using a bucking bar which is too light means that the gun

    must deliver more blows and may result in premature hardening of the rivet or damage to the skin surface

  • 2

    When removing a cherryLOCK or cherryMAX rivet

    you should first use a drill the same diameter as the pin, and remove the pin by drilling enough to remove the locking ring, then pinching out the pin with a pin punch.

  • 3

    So when using a dipper to gauge the length of a cherry rivet to be used on a riveted joint, the gauge indicates just above (-4)

    The length of rivet you should use is 5/16 inch

  • 4

    The minimum space between rivets is determined by

    the diameter of the rivets being used

  • 5

    The tool is used to cut rivets to size prior to driving:

    Rivet cutter