Nav 6

37問 • 2年前

問題一覧

Which panel on the ECDIS that allow the user to affect changes to the chart to control navigation and to customize the ECDIS application according to needs?

Toolbar panel

What Safety feature of ECDIS at any time a chart portion of a chart is displayed on the screen at a resolution greater than its maximum scale.

Over-scale notification

What do you call the draft of vessel at zero speed?

Static draft

Which function on ECDIS will check against all charted dangers that may be along the route leg?

Check route

What Is UKC stand for?

Under keel clearance

Where you will determine the corresponding maximum squat (Squat-max).

Each leg

In ECDIS what is TCS stand for...

Track control system

What color of chart soundings with a depth value lower than the Safety depth?

Dark Grey

What is the depth in meters, below sea level that is considered to be safe for the ship?

Safety Contour

Which function on ECDIS is used for setting chart safety depth range ___ given ship?

Shallow contour

What presentation symbols are displayed in a synthetic way?

Simplified

Which ECDIS chart setting bookmark user can select chart projection and also entering several safety depths values defendant on the ship characteristic?

Technical

Which ECDIS chart setting bookmark user can the chart display accordingly?

Presentation

Which alarm setting limit of difference between ship heading and active leg course which impossible to activate TCS?

Course difference limit

What parameter controls how fast the ship comes back to the track?

Velocity to came back track

Which safety setting that Indicate the area in which the depth of water is such that own ship may experience squal? (Normally twice vessel's static draft)

Deep contour

How will you set safety contour?

"same" or "equal" value as the Safety Depth

How will you set shallow contour?

same value as the Safety depth

What will you do if you cross the Safety Contour, the display of the Isolated Dangers (Obstructions) in sore and unsafe water is a mandatory adjustment considering Company UKC

Calculate Safety Depth and enter into ECDIS to for each leg requirements and CATZOC

Each chart is allocated to a navigational purpose depending on its scale It has 6 navigational purpose band. What is the name of navigational purpose number 3?

Coastal chart

What parameter is used to monitor two Gyro values?

Heading monitoring threshold

What you will annotate to ensure the mariner is fully aware of the depth of surrounding water the display must be populated with spot soundings and Isolated dangers?

No go Area

What Is the term for the draft of Vessel at zero speed plus your squat-max?

Dynamic draft

What condition of water if the minimum channel width is greater than four times the ship's breadth and the charted minimum water depth is at least twice the ship's draft at 0 knots?

Open water

What condition of water if the minimum channel width is less than four times the ship's breadth on the charted minimum water depth is less than twice the ship's draft at 0 knots?

Confined water

When calculating squat-max it is the product of block co-efficient and with relation to which vessel maneuver characteristic?

Safe maximum speed

How you will set Wheel over point or wheel over line before turning radius?

Accurate as possible 1 to 1.5 of ship length

Part of the Passage Planning Process the Master shall, for all stages of the voyage from Berth to Berth, calculate the vessels deepest navigational draughts, taking into account all factors and allowances including but not limited to?

Change of water density and the increase in draught due to fresh allowance

Which tool panel you use to draw bearing line, parallel or perpendicular lines and ranges circle, temporary text Information?

Editors

Which area on ECDIS the route check function checks and approves the planned route within the given limits?

Safe water limit

The arrival date and time (ETA) on ECDIS calculation should be in which time?

Local Time

On ECDIS safety settings real tide is calculated based on the following, which one is not included?

weather forecast

Calculate turning radius of vessel with the speed 10 knots and rate of turn 20 degrees?

2 cables

On which port that the observation made to collect tidal Information generally were not a extensive tidal prediction?

Standard ports

What safety parameter that provides information's on how far in advance an alert is given before reaching a potential threat to safety of the safety contour is encountered, based on the likely maximum speed over the leg?

Look ahead setting

What would be the formula in maintaining safety depth? (for open waters, confined waters, pilotage. anchorage, port).

Safety depth = static draft + Squat + UKC

Which contour refers to an area Indicated in which the depth of water is such that own ship may experience squat (Normally twice vessel's static draft),

Deep contour

Seam 5

Gwen Yuchen · 60問 · 2年前

Seam 5