Seam 3 pic

通報

問題一覧

What is a routine practice on board prior to a port arrival for loading or unloading operation of cargo?

Review Ship's Register of Cargo Gears

What wire ropes should be replaced at once, especially if some of the component wires are already worn out?

Cargo Runner

Who issues a certificate (Gear Certification) covering the proof loads and the angle at which each boom is tested?

Classification Society Surveyor

What is a general term used to describe the cargo lifting wire used on a derrick?

Cargo runner

Who should submit the proposed loading/unloading plan to the cargo terminal representative at the earliest opportunity to allow sufficient time for any subsequent modifications and to enable the terminal to prepare accordingly.

Responsible Officer

What is the abbreviation of SWL?

Safe Working Load

In cargo holds where no fixed lighting facilities are fitted, what should be provided to adequately. illuminate the working spaces?

Portable cluster lights

What kind of communication is an effective means that should be established between the ship's deck officers and the cargo terminal throughout the cargo operation?

Closed Communication

Who should conduct a visual inspection on the ship's cargo gears before the commencing of cargo operation?

Responsible Cargo Officer

What should be placed where a person should not pass during cargo operations?

Unobstructed warning sign

It is employed on board the vessel for any task which involves entry into enclosed spaces, hot work or burning of any kind, activity more than 2 m above the deck level or over side, and any electrical activity.

Permit to Work

Is the airborne concentration of a toxic gas substance average over any 15 minute period, expressed in parts per million(ppm).

Short Term Exposure Limit

Who issues the work permit onboard a vessel?

Chief officer

Risk assessment includes what work to be done, rescue operation, etc except one.

Permit to work doesn't need to be checked and permitted by the Master of the ship

It is an airborne concentration of substances under which it is believed that nearly all workers may be exposed everyday with no adverse effect.

Threshold limit Value

It is the airborne concentration of a toxic substance average over an 8 hour period usually expressed in parts per million (ppm)

Time Weighted Average

What refers to raised steel structure that surrounds the hatch opening?

hatch coaming

The cargo spaces for oil tankers are generally located in, except one.

aft peak tank

It is a general cargo ship consists of a lower hold and tween decks?

Cargo Space

Who should make a risk assessment of the spaces and a responsible officer should take charge of the operation?

Competent Officer

What does a competent officer should make before entering enclosed spaces to take charge of the operation?

Risk Assessment

What has to be filled out and to be checked so as to prevent any accident which can endanger life?

Permit to Work

It is to transfer the load from the hatch covers to the coaming structure, maintain the hatch cover in the correct sealing position and allow the coaming to move during the ship's rolling and pitching.

Bearing Pads

These are located close to hatch corners and the joints between the hatch cover panels.

Drain Valves

Who should be familiar with the layout of the cargo spaces so that damages to the structural parts could be determined?

Chief Officer

It is defined as the deterioration of a metal due to an electrochemical reaction with its environment.

Technically Corrosion

The most appropriate time to make the inspection would be _____ the discharge of the cargoes and the spaces cleaned.

after

In cargo holds, tank plating and side shell structures are apt to be damaged by cargo handling operations.

top

Until the _____s, hatches were typically secured with wooden boards and tarpaulins held down with battens.

1950s

_____ from the weather deck down to the lower hold are fitted along the forward and after bulkheads.

steel ladders

Helps in reducing ship's stresses on the hull of the vessel. It also provides for transverse stability of the ship.

Ballasting of Ship

Are separated tanks only to be used for the transport of ballast.

Ballast tanks

The most common protection system used on the ship.

Coating

Water Ballast Tanks are inspected every?

12 months

Which of the following is not considered in testing the atmosphere of the space?

Temperature

What document should be filled after finishing the work and when the person is out of the enclosed space?

Checklist

What happens to the individual steel covers onto a stowage tank at the hatch end when the cover is opened?

Ride up and tip

These are made watertight, using a compressible jointing strip at the place where the cover sits on the hatch openings.

hatch covers

What is the oldest or most traditional method for testing hold cover compression and cannot test the water tight integrity of the hold?

chalk test

What do you call the testing for a hatch cover wherein it's a more accurate method of testing water tightness of hold and its cover?

ultrasonic test

These types of anodes are not to be used in the ship ballast water tanks while in operation as they tend to generate hydrogen which can have deleterious effects on some ballast tank coatings.

Magnesium Anodes

It has to be carried out in accordance with the requirements of the relevant authorities such as the ship's Classification Society surveyor.

Repairs

What is the purposes of ballast tanks?

All of the above

For safety purpose, _____ are provided in the pipelines near the openings to prevent sea water from entering the ship and vice-verse.

Non return valves

Tank inspection of water ballast tanks in container ships must be done at intervals of what?

At least once every 12 months

If the atmosphere of the ballast tank can be controlled to reduce the oxygen content, the corrosion rate decreases drastically. This system is known as oxygen stripping which is done by introducing inert gas to maintain the oxygen level in the tank below ___?

If the corrosion wastes of the tank surface exceed renewal of hull structural to be carried out.

75%

What is known as introducing inert gas to maintain the oxygen level in the tank below 4%?

Oxygen Stripping

Tank inspection of ballast tanks in tankers and gas carriers must be done at intervals of what?

At least once every 12 months

What anodes are not to be used in the ship ballast water tanks as they tend to generate hydrogen, while in operation, which can have deleterious effects on some ballast tank coatings.

Magnesium Anodes

Following are Minor Damages, except.

Rope Bight

Chapter 2 is described as

Describes how Enhanced survey to be carried out during the periodical surveys along with timings and conduct of enhance surveys and requirements of dry-docking.

This chapter discusses the requirement of onboard documents supplied and maintained by owner that must be available to the surveyor and requirements for survey report file, supporting documents, review of document by surveyor.

Chapter 7

_____ will have to be carried out in accordance with the requirements of the relevant authorities.

Repairs

The following are needed as evidence in assisting the preparation of damage report except one. Which one is it?

Check for signs of future damage i.e. rusted broken welds or rusted indents.

Damage report should be signed by whom?

Master of MV

Chapter 6 is described as

Immediate and thorough repairs to damages and wastages

What are the things needed to be considered when writing a damage report?

Date, place, correct name of the damaged part

Items required for making a damage report includes the following except:

ruler

The guidelines on the enhanced survey program of inspection during the survey of Oil tankers of Annex B are as follows, EXCEPT?

Reporting Principles

Seam 5

Seam 5

Marlaw

Gwen Yuchen · 91問 · 2年前

Marlaw

91問 • 2年前

Seam 2 [87]

Gwen Yuchen · 42問 · 2年前

Seam 2 [87]

42問 • 2年前

Dwatch 2

Dwatch 2

Nav 6

Gwen Yuchen · 37問 · 2年前

Nav 6

37問 • 2年前

Mar Env

Mar Env

Mgmt 1

Mgmt 1

Seam 2 V2

Gwen Yuchen · 40問 · 2年前

Seam 2 V2

40問 • 2年前

COLREGs - Convention on the International Regulations for Preventing Collisions at Sea, 1972

Gwen Yuchen · 41問 · 4ヶ月前

COLREGs - Convention on the International Regulations for Preventing Collisions at Sea, 1972

41問 • 4ヶ月前

Nathan Flags

Gwen Yuchen · 13問 · 2年前

Nathan Flags

13問 • 2年前

Forms

Gwen Yuchen · 7問 · 1年前

Forms

7問 • 1年前

Seam 5

Seam 5

Marlaw

Marlaw

Nav 6

Gwen Yuchen · 90問 · 2年前

Nav 6

90問 • 2年前

Dwatch

Dwatch

Marenv

Gwen Yuchen · 72問 · 2年前

Marenv

72問 • 2年前

Seam 2 30/30

Gwen Yuchen · 35問 · 2年前

Seam 2 30/30

35問 • 2年前

Seam 2 Exclusive

Gwen Yuchen · 33問 · 2年前

Seam 2 Exclusive

33問 • 2年前

Mgmt

Mgmt

Seam 2 Multiple

Seam 2 Multiple

Nav 7

Gwen Yuchen · 60問 · 1年前

Nav 7

60問 • 1年前

Seam 6

Gwen Yuchen · 67問 · 1年前

Seam 6

67問 • 1年前

International Maritime Dangerous Goods (IMDG) Classes

Gwen Yuchen · 9問 · 4ヶ月前

International Maritime Dangerous Goods (IMDG) Classes

9問 • 4ヶ月前

Marpol Annexes

Gwen Yuchen · 6問 · 4ヶ月前

Marpol Annexes

6問 • 4ヶ月前