問題一覧
1
shall be conducted in order to establish set of reference points for a cadastral survey, public land subdivision survey, townsite reservation and other similar survey projects
project control surveys
2
instruments to be used for project control survey
ETS, GNSS RECEIVERS
3
if ets surveying instruments are to be used the control survey shall be conducted either by _____ and ______
traverse, triangulation
4
survey order of project control surveys shall be issued by
RED
5
the project area shall be based on the recommendation of the
RTD for Lands
6
In a network design for field survey using terrestrial conventional surveying instruments and techniques the ff should be considered
the _____ and the physiographic features of the project area. control point should be established on solid ground
terrain
7
the intervisibility of the stations shall be the primary concern. the lines connecting the control points within the network should create a closed ______
polygon
8
a minimum of ___ reference points (three is preferred) should be visible from each control point.
2
9
the network triangles should preferably ______
equilateral
10
the available data on old ___________ and __________ based on records
geodetic and project controls
11
all the main control points in a proposed cadastral projects and other large survey projects shall be conducted with a primary ____ order accuracy and shall be designated as BLLMS
3rd
12
the first primary control point known as P1 shall be designated as
BLLM # 1
13
when no location monuments have been previously established a pair of BLLMS to be numbered 1 and 2 shall be approximately plotted on the map at the most suitable
location
14
all fixed controls old control points shall be plotted. at least three ____ order or ____ order geodetic control station shall be included in the network
2nd or 3rd
15
the main control shall be designed and can be divided into ____ wherein each loops shall start from one geodetic control station and shall close to another geodetic control station
loops
16
additional pairs of location monument shall be established along the main control project at an interval of ___ kilometers
5
17
the one who provides the ____ distance shall be designated and numbered as BLLM #3 4 5 6
shorter
18
the geodetic engineer should ensure that no lots shall have a distance of more than ___ km from the nearest reference point
1
19
numbering of control points shall be coordinated with the
LMS REGIONAL OFFICE
20
to avoid duplication of cadastral project numbers. lms office shall coordinate with ____ for the numbering
LMB
21
Section: 45 Conduct of project control surveys
for ets with _____ recorder a printed and a digital file or raw data shall be included in the survey returns
electronic data
22
without electronic data recorder all field observations shall be recorded by the geodetic engineer in the _____
field notes
23
geodetic engineers in private practice field notes/field notes cover on authorized LMB forms shall be properly filled out and sworn to ______
before a notary public
24
geodetic engineers in government, field notes/field notes cover on authorized LMB forms should be sworn to before an official authorized to ______
subscribe oath
25
refers to the establishment of main and subsidary controls over the entire area subject of the cadastral project
project control survey
26
refers to the establishment of political boundary monuments defining the boundary lines of the entire city/municipality and their component barangay
political boundary survey
27
refers to the determination of individual lot boundaries and their corresponding area primarily for the purpose of acquiring title
lot surveys
28
the survey of cadastral project shall be considered as in progress from the issuance of survey order/authority contract by _____
RED
29
the survey of cadastral project shall be considered as in progress from the issuance of survey order/authority contract by RED until the final approval of the survey returns by _____
RTD FOR LANDS
30
Guidelines on the conduct of bidding and awarding of cadastral survey projects contracts
RA 9184
31
Regional bids and award committee is headed by
RTD FOR LANDS
32
Section 65: The political boundary of the municipality or city covered by a _______ shall be located, marked with concrete monuments and surveyed base on the law or executive orders
cadastral projects
33
Section 66: If political boundary survey is an independenr project the hired GE by LGU will conduct the survey and shall required to submit a ______ of the local council
resolution
34
Section 71: Pre survey conference
Pre survey conference is headed by ____ and assisted by RTD for lands
RED
35
CBM
City Boundary Monument
36
MBM
Municipal Boundary Monument
37
BBM
Barangay Boundary Monument
38
Section 74: ______ shall be established at the prominent turns or angles of the boundaries and where they cross roads or large streams
Political Boundary Monuments
39
Section 75: In case of boundary dispute
a. Corners shall be defined by hardwood post or monuments with a diameter of at least ___ cm and length of 2 cm
10cm
40
Section 75: In case of boundary dispute
a. Corners shall be defined by hardwood post or monuments with a diameter of at least 10 cm and length of ___ cm
2
41
Section 75: In case of boundary dispute
b. claims on one lgu shall be indicated by _____ and the other lgus by heavy dash lines
heavy dotted lines
42
Section 75: In case of boundary dispute
b. claims on one lgu shall be indicated by heavy dotted lines and the other lgus by _____
heavy dash lines
43
______ on division between the lgu as indicated by tax dec
heavy full line
44
for lot lines
ordinary full lines
45
Section 80: After ___ days of date of issuance of survey order/signing of contract no GE shall be allowed to conduct a survey
30
46
Sectio. 81:
_____ done to gather information in the field prepare preliminary maps estimated number of lots and serve as guide to the lot survey team
lot sketching
47
manufacturing, hauling and the actual setting of the monument in the ground
monument setting
48
Sketch plan shall show
1. stream of __ meters or more in width
5
49
Sketch plan shall show
2. stream less than __ meters in width thru which water flows continuously
5
50
Sketch plan shall show
3. ____, ditches and canals
irrigation
51
Sketch plan shall show
4. a strip of __ meters wide starting from the bank on each side of any rivers or stresms
40
52
Sketch plan shall show
5. Strip of lands along the edge of the bodies of water shall reserve as easement of public use
a. urban areas: __ meters
3
53
Sketch plan shall show
5. Strip of lands along the edge of the bodies of water shall reserve as easement of public use
b. agricultural areas: __ meters
20
54
Sketch plan shall show
5. Strip of lands along the edge of the bodies of water shall reserve as easement of public use
c. forested areas: __ meters
40
55
if the area is within the __ meter bank protection of a forestland. lands bordering the seas, golfs, bays, or ports that is subjected to easement of salvage zone 20 meters measured landward from the interior limit of the shoreline is needed to reflected in the sketch
40
56
a __ meter strip of land along the edge of a normal high waterline on rivers and streams with channels of atleast 5 m wide shall be reflected on the sketch map
20
57
lots bordering natural features, if the water is continuously flowing even the width is less than __ meters
5
58
a strip of land at least __ meters in width fronting the sea, ocean or other bodies of water that has considerable mangrove trees and was declared mangrove forest
50
59
a strip of __ meters on both sides of rivers channels/banks that has existing mangrove plantation
20
60
storm prone areas, mangrove forest strip __ meters wide inward along shoreline fronting seas, oceans and other bodies of water and 50 meters strip river bank protection
100
61
storm prone areas, mangrove forest strip 100 meters wide inward along shoreline fronting seas, oceans and other bodies of water and __ meters strip river bank protection
50
62
__ meter strips of land outside the boundaries and immediately adjacent to designated protected areas
20
63
__ meter strip of forest land adjoining community-based forest management projects
20
64
__ meters strips of land along the boundaries of reforestation projects adjacent to private alienable/disposable lands
20
65
a buffer zone about __ meters of residual forest shall be established immediately surrounding the old growth forest stands.
100
66
it shall be concrete and cylindrical in forms at least 10 cm in diameter by 50 cm in length set 15cm above ground and 35 cm below
standard monument
67
part of the fence when not less than 10 cm in diameters
concrete post
68
living edible fruit trees not less than __ cm in diameters or trees belonging to the first group with diameter not less than 15cm
15
69
peg, being in a composition by fire, natural corosion or decay with nominal dimension of __ mm square in cross section for atleast 100 millimeters from the top and not less than 400millimeters in length
50
70
peg, being in a composition by fire, natural corosion or decay with nominal dimension of 50 mm square in cross section for atleast __ millimeters from the top and not less than 400millimeters in length
100
71
peg, being in a composition by fire, natural corosion or decay with nominal dimension of 50 mm square in cross section for atleast 100 millimeters from the top and not less than __ mm in length
400
72
Section 88: acceptable corner markers (substitute markers)
1. acceptable living trees shall be blazed at about __ cm above ground
20
73
Section 88: acceptable corner markers (substitute markers)
2. wooden post of narra, ipil,
molave yacal of not less than __ cm in diameter
15
74
Section 88: acceptable corner markers (substitute markers)
3. metal pipes having an outside diameter greater than __ cm shall be galvanized iron spike/conical hole not exceeding 2 cm in diameter and not less than 1cm depth
2
75
cross (x) depth of at least __ mm
5
76
___ measurements are made
cross (x)
77
Section 90: Individual lot survey shall only be conducted after a __ day posting of the pis
30
78
Section 93: Approved Surveys
b. the surrender of approved tracing _____ plan of land surveyed has not been titled and the claimant wants to combine the surveyed area
cloth/sepia
79
if the claimant voluntarily excludes portion of of the surveyed and untitled lot. the excluded area shall be numbered as a separate
cadastral lot
80
the ff shall be surveyed
1. titled/untitled properties without ____
lot description
81
the ff shall be surveyed
2. titled/untitled with ___ or missing lot description
erroneous
82
the ff shall be surveyed
3. titled/untitled with technical description from
magnetic surveys
83
Section 94: All lands of the public domain shall be surveyed as one lot with the authority of
RED
84
Section 97: All other mineral land surveys shall be projected by their tie lines in by coordinates and indicated in the cadastral map as
dotted lines
85
Section 98: Public Land Subdivision pls and GSS within the Cadastral projectd
the individual lot in the pls/gss be indicated in the map as
red dotted lines
86
Article 6: Public Land Subdivision
Section 116: Determination of position of the lots boundary from an established reference point using
1. GNSS observation - area is at least
1,500 has
87
Article 6: Public Land Subdivision
Section 116: Determination of position of the lots boundary from an established reference point using
2. ETS observation fro traverse, triangulation or trilateration from established PRS 92 if the area is below
1,500 has
88
lot corners shall be determined by the side shot using conventional instruments with minimum specifications
ets: area ___ has
1,500
89
one second optica/electronic digital theodolite with edm for distance determination: area _____
500-1,500 has
90
six second optical/electronic digital theodolite with edm: area _____
10-500 has
91
twenty second engineers transit with 100 meter steel tape: area ____
5-10 has
92
thirty second engineers transit with 50 meter steel tape: area ____
less than 5 has
93
Section 130: the survey shall be conducted upon issuance of SO/SA from
DENR officials
94
no survey on reclaimed lands survey shall be conducted without prior issuance of
SA
95
boundary survey shall be first submitted for verification and approval before its subdivision into
smaller lots
96
buffer zone ___ meters shall be maintained along the edge of a reclaimed land
20 meters
dmc 2010-13 part 1 section 1 - 28
dmc 2010-13 part 1 section 1 - 28
engineer cute · 100問 · 1年前dmc 2010-13 part 1 section 1 - 28
dmc 2010-13 part 1 section 1 - 28
100問 • 1年前engineer cute
dmc 2010-13 part 2 section 1 - 28
dmc 2010-13 part 2 section 1 - 28
engineer cute · 10問 · 1年前dmc 2010-13 part 2 section 1 - 28
dmc 2010-13 part 2 section 1 - 28
10問 • 1年前engineer cute
survey symbols
survey symbols
engineer cute · 95問 · 1年前survey symbols
survey symbols
95問 • 1年前engineer cute
dao 27
dao 27
engineer cute · 59問 · 1年前dao 27
dao 27
59問 • 1年前engineer cute
dmc 2010 plotting of bbim mbim
dmc 2010 plotting of bbim mbim
engineer cute · 14問 · 1年前dmc 2010 plotting of bbim mbim
dmc 2010 plotting of bbim mbim
14問 • 1年前engineer cute
dmc japun additional
dmc japun additional
engineer cute · 16問 · 1年前dmc japun additional
dmc japun additional
16問 • 1年前engineer cute
bp220
bp220
engineer cute · 44問 · 1年前bp220
bp220
44問 • 1年前engineer cute
geodesy/carto mcq’s
geodesy/carto mcq’s
engineer cute · 46問 · 1年前geodesy/carto mcq’s
geodesy/carto mcq’s
46問 • 1年前engineer cute
agricultural land reform laws
agricultural land reform laws
engineer cute · 93問 · 1年前agricultural land reform laws
agricultural land reform laws
93問 • 1年前engineer cute
2019 terms
2019 terms
engineer cute · 28問 · 1年前2019 terms
2019 terms
28問 • 1年前engineer cute
問題一覧
1
shall be conducted in order to establish set of reference points for a cadastral survey, public land subdivision survey, townsite reservation and other similar survey projects
project control surveys
2
instruments to be used for project control survey
ETS, GNSS RECEIVERS
3
if ets surveying instruments are to be used the control survey shall be conducted either by _____ and ______
traverse, triangulation
4
survey order of project control surveys shall be issued by
RED
5
the project area shall be based on the recommendation of the
RTD for Lands
6
In a network design for field survey using terrestrial conventional surveying instruments and techniques the ff should be considered
the _____ and the physiographic features of the project area. control point should be established on solid ground
terrain
7
the intervisibility of the stations shall be the primary concern. the lines connecting the control points within the network should create a closed ______
polygon
8
a minimum of ___ reference points (three is preferred) should be visible from each control point.
2
9
the network triangles should preferably ______
equilateral
10
the available data on old ___________ and __________ based on records
geodetic and project controls
11
all the main control points in a proposed cadastral projects and other large survey projects shall be conducted with a primary ____ order accuracy and shall be designated as BLLMS
3rd
12
the first primary control point known as P1 shall be designated as
BLLM # 1
13
when no location monuments have been previously established a pair of BLLMS to be numbered 1 and 2 shall be approximately plotted on the map at the most suitable
location
14
all fixed controls old control points shall be plotted. at least three ____ order or ____ order geodetic control station shall be included in the network
2nd or 3rd
15
the main control shall be designed and can be divided into ____ wherein each loops shall start from one geodetic control station and shall close to another geodetic control station
loops
16
additional pairs of location monument shall be established along the main control project at an interval of ___ kilometers
5
17
the one who provides the ____ distance shall be designated and numbered as BLLM #3 4 5 6
shorter
18
the geodetic engineer should ensure that no lots shall have a distance of more than ___ km from the nearest reference point
1
19
numbering of control points shall be coordinated with the
LMS REGIONAL OFFICE
20
to avoid duplication of cadastral project numbers. lms office shall coordinate with ____ for the numbering
LMB
21
Section: 45 Conduct of project control surveys
for ets with _____ recorder a printed and a digital file or raw data shall be included in the survey returns
electronic data
22
without electronic data recorder all field observations shall be recorded by the geodetic engineer in the _____
field notes
23
geodetic engineers in private practice field notes/field notes cover on authorized LMB forms shall be properly filled out and sworn to ______
before a notary public
24
geodetic engineers in government, field notes/field notes cover on authorized LMB forms should be sworn to before an official authorized to ______
subscribe oath
25
refers to the establishment of main and subsidary controls over the entire area subject of the cadastral project
project control survey
26
refers to the establishment of political boundary monuments defining the boundary lines of the entire city/municipality and their component barangay
political boundary survey
27
refers to the determination of individual lot boundaries and their corresponding area primarily for the purpose of acquiring title
lot surveys
28
the survey of cadastral project shall be considered as in progress from the issuance of survey order/authority contract by _____
RED
29
the survey of cadastral project shall be considered as in progress from the issuance of survey order/authority contract by RED until the final approval of the survey returns by _____
RTD FOR LANDS
30
Guidelines on the conduct of bidding and awarding of cadastral survey projects contracts
RA 9184
31
Regional bids and award committee is headed by
RTD FOR LANDS
32
Section 65: The political boundary of the municipality or city covered by a _______ shall be located, marked with concrete monuments and surveyed base on the law or executive orders
cadastral projects
33
Section 66: If political boundary survey is an independenr project the hired GE by LGU will conduct the survey and shall required to submit a ______ of the local council
resolution
34
Section 71: Pre survey conference
Pre survey conference is headed by ____ and assisted by RTD for lands
RED
35
CBM
City Boundary Monument
36
MBM
Municipal Boundary Monument
37
BBM
Barangay Boundary Monument
38
Section 74: ______ shall be established at the prominent turns or angles of the boundaries and where they cross roads or large streams
Political Boundary Monuments
39
Section 75: In case of boundary dispute
a. Corners shall be defined by hardwood post or monuments with a diameter of at least ___ cm and length of 2 cm
10cm
40
Section 75: In case of boundary dispute
a. Corners shall be defined by hardwood post or monuments with a diameter of at least 10 cm and length of ___ cm
2
41
Section 75: In case of boundary dispute
b. claims on one lgu shall be indicated by _____ and the other lgus by heavy dash lines
heavy dotted lines
42
Section 75: In case of boundary dispute
b. claims on one lgu shall be indicated by heavy dotted lines and the other lgus by _____
heavy dash lines
43
______ on division between the lgu as indicated by tax dec
heavy full line
44
for lot lines
ordinary full lines
45
Section 80: After ___ days of date of issuance of survey order/signing of contract no GE shall be allowed to conduct a survey
30
46
Sectio. 81:
_____ done to gather information in the field prepare preliminary maps estimated number of lots and serve as guide to the lot survey team
lot sketching
47
manufacturing, hauling and the actual setting of the monument in the ground
monument setting
48
Sketch plan shall show
1. stream of __ meters or more in width
5
49
Sketch plan shall show
2. stream less than __ meters in width thru which water flows continuously
5
50
Sketch plan shall show
3. ____, ditches and canals
irrigation
51
Sketch plan shall show
4. a strip of __ meters wide starting from the bank on each side of any rivers or stresms
40
52
Sketch plan shall show
5. Strip of lands along the edge of the bodies of water shall reserve as easement of public use
a. urban areas: __ meters
3
53
Sketch plan shall show
5. Strip of lands along the edge of the bodies of water shall reserve as easement of public use
b. agricultural areas: __ meters
20
54
Sketch plan shall show
5. Strip of lands along the edge of the bodies of water shall reserve as easement of public use
c. forested areas: __ meters
40
55
if the area is within the __ meter bank protection of a forestland. lands bordering the seas, golfs, bays, or ports that is subjected to easement of salvage zone 20 meters measured landward from the interior limit of the shoreline is needed to reflected in the sketch
40
56
a __ meter strip of land along the edge of a normal high waterline on rivers and streams with channels of atleast 5 m wide shall be reflected on the sketch map
20
57
lots bordering natural features, if the water is continuously flowing even the width is less than __ meters
5
58
a strip of land at least __ meters in width fronting the sea, ocean or other bodies of water that has considerable mangrove trees and was declared mangrove forest
50
59
a strip of __ meters on both sides of rivers channels/banks that has existing mangrove plantation
20
60
storm prone areas, mangrove forest strip __ meters wide inward along shoreline fronting seas, oceans and other bodies of water and 50 meters strip river bank protection
100
61
storm prone areas, mangrove forest strip 100 meters wide inward along shoreline fronting seas, oceans and other bodies of water and __ meters strip river bank protection
50
62
__ meter strips of land outside the boundaries and immediately adjacent to designated protected areas
20
63
__ meter strip of forest land adjoining community-based forest management projects
20
64
__ meters strips of land along the boundaries of reforestation projects adjacent to private alienable/disposable lands
20
65
a buffer zone about __ meters of residual forest shall be established immediately surrounding the old growth forest stands.
100
66
it shall be concrete and cylindrical in forms at least 10 cm in diameter by 50 cm in length set 15cm above ground and 35 cm below
standard monument
67
part of the fence when not less than 10 cm in diameters
concrete post
68
living edible fruit trees not less than __ cm in diameters or trees belonging to the first group with diameter not less than 15cm
15
69
peg, being in a composition by fire, natural corosion or decay with nominal dimension of __ mm square in cross section for atleast 100 millimeters from the top and not less than 400millimeters in length
50
70
peg, being in a composition by fire, natural corosion or decay with nominal dimension of 50 mm square in cross section for atleast __ millimeters from the top and not less than 400millimeters in length
100
71
peg, being in a composition by fire, natural corosion or decay with nominal dimension of 50 mm square in cross section for atleast 100 millimeters from the top and not less than __ mm in length
400
72
Section 88: acceptable corner markers (substitute markers)
1. acceptable living trees shall be blazed at about __ cm above ground
20
73
Section 88: acceptable corner markers (substitute markers)
2. wooden post of narra, ipil,
molave yacal of not less than __ cm in diameter
15
74
Section 88: acceptable corner markers (substitute markers)
3. metal pipes having an outside diameter greater than __ cm shall be galvanized iron spike/conical hole not exceeding 2 cm in diameter and not less than 1cm depth
2
75
cross (x) depth of at least __ mm
5
76
___ measurements are made
cross (x)
77
Section 90: Individual lot survey shall only be conducted after a __ day posting of the pis
30
78
Section 93: Approved Surveys
b. the surrender of approved tracing _____ plan of land surveyed has not been titled and the claimant wants to combine the surveyed area
cloth/sepia
79
if the claimant voluntarily excludes portion of of the surveyed and untitled lot. the excluded area shall be numbered as a separate
cadastral lot
80
the ff shall be surveyed
1. titled/untitled properties without ____
lot description
81
the ff shall be surveyed
2. titled/untitled with ___ or missing lot description
erroneous
82
the ff shall be surveyed
3. titled/untitled with technical description from
magnetic surveys
83
Section 94: All lands of the public domain shall be surveyed as one lot with the authority of
RED
84
Section 97: All other mineral land surveys shall be projected by their tie lines in by coordinates and indicated in the cadastral map as
dotted lines
85
Section 98: Public Land Subdivision pls and GSS within the Cadastral projectd
the individual lot in the pls/gss be indicated in the map as
red dotted lines
86
Article 6: Public Land Subdivision
Section 116: Determination of position of the lots boundary from an established reference point using
1. GNSS observation - area is at least
1,500 has
87
Article 6: Public Land Subdivision
Section 116: Determination of position of the lots boundary from an established reference point using
2. ETS observation fro traverse, triangulation or trilateration from established PRS 92 if the area is below
1,500 has
88
lot corners shall be determined by the side shot using conventional instruments with minimum specifications
ets: area ___ has
1,500
89
one second optica/electronic digital theodolite with edm for distance determination: area _____
500-1,500 has
90
six second optical/electronic digital theodolite with edm: area _____
10-500 has
91
twenty second engineers transit with 100 meter steel tape: area ____
5-10 has
92
thirty second engineers transit with 50 meter steel tape: area ____
less than 5 has
93
Section 130: the survey shall be conducted upon issuance of SO/SA from
DENR officials
94
no survey on reclaimed lands survey shall be conducted without prior issuance of
SA
95
boundary survey shall be first submitted for verification and approval before its subdivision into
smaller lots
96
buffer zone ___ meters shall be maintained along the edge of a reclaimed land
20 meters