問題一覧
1
Based on PAES 116: 2001 small engine, the noise emitted by the engine measured 50 mm away from the operator’s ear level shall not be more than?
92 db
2
Two-wheel tractor speed limit on bare dirt road in kph.
4 to 6
3
Based on PAES 133: 2004 disc harrow – methods of test, what is the travelling speed to be maintained during operation?
7 kph to 8 kph
4
Type of weeder with rectangular, triangular or crescent shapes with cutting edges sharpened and hardened.
Blade type
5
Type of weeder with a straight, curved, round or square cross-section steel rods with sharply pointed and hardened soil engaging ends.
Tine type
6
Type of weeder which utilize either blade or tine type of soil working parts with short (0.15 m to 0.5 m), medium (>0.5 m to 1 m) and long (>1 m) handles.
Hand-held weeder
7
Type of weeder which utilizes either blade, tine or rotary soil working parts for dry and wet field weeding.
Push-type weeder
8
Based on PAES 115: 2000 centrifugal, mixed flow and axial flow water pumps – methods of test the water to be used during the test shall be clean with a temperature range of?
10 – 40 ºC
9
Type of weeder in which soil working parts are mounted on a frame or tool bar and pulled by an animal for dry field weeding.
Animal- drawn weeder
10
Type of rotary weeder driven by its own engine for wet field weeding.
Power-weeder
11
Type of weeder in which soil working parts are mounted on a frame or tool bar and pulled by either two- or four-wheel tractor for dry field weeding.
Tractor-mounted weeder
12
Type of granule applicator that uses wheel rotational motion to actuate application of granules. The granules are metered by a spinner plate or a screw attached to the ground wheel.
Trailing granule applicator
13
Type of knapsack granule applicator that makes use of gravitational force to apply granules.
Gravity knapsack
14
What type of field operation pattern?
[object Object]
Straight alternation pattern
15
Type of granule applicator that uses a spinner plate or a screw attached to the power take-off shaft to actuate metering of granules.
Three-point hitch type granule applicator
16
PAES 148:2010 Agricultural Machinery
Field Cultivator – Method of test
17
Power requirement of an implement being towed or pushed.
Drawbar power
18
Ratio between the productivity of a machine under field conditions and the theoretical maximum productivity.
Field efficiency
19
Horizontal distance perpendicular to the direction of travel between the outermost edges of the implement.
Implement width
20
Unplowed soil at the end of the furrow strip.
Head land
21
Type of pump which combines some of the features of both centrifugal and the axial flow pump and in which head is developed partly by the centrifugal force and partly by the lift of the vanes on the water.
Mixed flow pump
22
Tillage implement resembling a double moldboard, one left wing and one right wing used to make ridges and beds for planting and trenches for irrigation and drainage purposes.
AOTA
23
One movement of piston for each of the events such as intake, compression, power and exhaust.
Four-stroke cycle
24
Based on PAES 118: 2001 four-wheel tractor, what is the allowable wheel slip for maximum efficiency for four-wheel drive tractor at firm soil.
6-10
25
One downward movement of piston for the events exhaust and intake and one upward movement of piston for the events compression and power.
Two-stroke cycle
26
Type of engine where the combustion of fuel takes place inside the cylinder.
Internal combustion engine
27
Fuel and air mixture is first introduced inside the cylinder in gaseous condition. It is then compressed and ignited resulting to the generation of power.
Spark ignition engine
28
I-head arrangement of valves wherein the intake and exhaust valves are located in the cylinder head.
Overhead valve (ohv)
29
System in which water/liquid-coolant serves as the cooling medium which circulates in the water jackets to absorb the heat of the engine.
AOTA
30
Based on PAES 137:2004 agricultural trailer – methods of test, what is the maximum speed of operation for two-wheel tractor?
10 kph
31
What type of field operation pattern?
[object Object]
Circuitous pattern turn strips at corner diagonals
32
Compression ignition engine
33
Engine in which combustion occurs through the initiation of a spark on the fuel and air mixture
Spark ignition engine
34
Based on PAES 112: 2000 Lever-Operated Knapsack Sprayer, the tank shall have a minimum capacity of how many liters?
10
35
Vertical distance from base plane of the pump to the free level of water source.
Static suction head (h1)
36
PAES 149:2010 Agricultural Machinery
Subsoiler– Specifications
37
Part of the transplanting arm that picks rice seedlings.
Grasping fork
38
Modified wheel used in transplanters to facilitate movement in the field.
Paddle wheel
39
Rice seedlings grown in nursery for transplanting wherein the soil is retained with the roots for transplanting.
Soil-bearing seedlings
40
Type of mechanical rice transplanter designed for handling rice seedlings that were grown with mat. Soil and fertilizers were mixed thoroughly and filled uniformly in seedling boxes when growing the seedlings.
Soil-bearing seedling type or mat type
41
Steel rod that connects the pump handle to the plunger assembly within the cylinder.
Pump rod/plunger rod
42
Maximum distance that the plunger moves when the handle is moved.
Stroke
43
Type of force type hand pump that discharges water on both forward and back strokes.
Double acting
44
What type of field operation pattern?
[object Object]
Circuitous pattern 270 degrees turns from boundaries or center
45
Power recommended by the manufacturer for satisfactory operation under continuous duty condition within a specified speed range.
Continuous brake power
46
Type of weeder with curved or straight spikes or puddles radially attached to a common axle, which rotate to uproot and bury weeds.
Rotary type
47
Based on PAES walking-type agricultural tractor (pull-type),the noise emitted by the tractor measured 50 mm away from the operator’s ear level shall not be more than?
92 db (A)
48
Power output of a “fully equipped” engine.
Net power
49
Highest power developed.
Peak brake power
50
Based on PAES 112: 2000 Lever-Operated Knapsack Sprayer, the sprayer shall have a minimum volumetric efficiency of?
80%
51
Bar at the rear of a tractor to which implements are hitched.
Drawbar
52
PAES 154:2010 Agricultural Machinery
Hand Pump – Methods of Test
53
Operation of the pump from the topmost position of the handle to its lowest position.
Full stroke
54
PAES 156:2010 Agricultural Machinery
Mist Blower – Methods of Test
55
Type of power sprayer mounted on a steel frame which is carried by at least two (2) operators for transport.
Frame mounted power sprayer
56
PAES 158:2011 Agricultural Machinery
Power sprayer for mango – Methods of Test
57
Component of the sugarcane planter that cuts the sugarcane billets and drops it into the furrow.
Feeding shank
58
Agricultural equipment used for planting sugarcane billets.
Sugarcane planter
59
Based on PAES 155:2010 agricultural machinery – mist blower: What is the minimum net weight of mist blower?
15 kg
60
Self-propelled, wheeled vehicle having two axles designed to carry, pull or propel agricultural implements and machines.
Four-wheel tractor
61
What type of field operation pattern?
[object Object]
Circuitous pattern square corners
62
Combination of one upper link and two lower links, each articulated to the tractor and the implement at opposite ends in order to connect the implement to the tractor.
Three-point linkage
63
Based on PAES 137:2004 agricultural trailer – methods of test, what is the maximum speed of operation for four-wheel tractor?
20 kph
64
Articulated connection between a link and the implement.
Hitch point
65
Articulated connection between a link and the tractor.
Link point
66
Power measured at the flywheel or the crankshaft
engine power
67
Implement used to pulverize the soil to attain a better soil tilt for the seed germination and growth.
Disc harrow
68
Consists of two or more gangs, in which a set of two gangs follows behind the front gangs and is arranged in such a way that the discs on the front gangs throw the soil in one direction (usually outward) and the discs on the rear gangs throw the soil in the opposite direction.
Tandem disc harrow
69
Operation that cuts and throws the soil away from the base of plants.
Off barring
70
Based on PAES 155:2010 agricultural machinery – mist blower: What is the minimum air speed of mist blower?
90 m/s
71
Any group of different tillage operation, following primary tillage, which are designed to create refined soil conditions before the seed is planted.
Secondary tillage
72
Spade-shaped, V-pointed soil working tool, which is used for various plowstocks, cultivators, grain drills, and soil scarifiers.
Shovel
73
Operation which is performed to cut the soil with partial or complete soil inversion.
Moldboard plowing
74
Implement which works under the combined principles of the regular disc plow and harrow.
Plow-harrow
75
Implement used for broadcast or strip tillage and is also used as chemical incorporator and as row crop cultivator.
Rotary tiller
76
Based on PAES 153:2010 agricultural machinery – hand pump: Force type hand pump shall lift the water up to a height of how many meters from the ground level?
15 m
77
Implement which consists of two horizontal power driven spiral flanged shafts which rotate vertically.
Aota
78
Auxiliary component of the subsoiler that helps maintain uniform operating depth and for adjusting depth of cut.
Gauge wheel
79
Tillage which constitutes the initial major soil-working operation, normally designed to reduce soil strength, cover plant materials, and rearrange aggregates.
Primary tillage
80
Structural member primarily used for attaching a tillage tool to a beam.
Shank
81
Type of self-propelled rice transplanter wherein the operator walks behind the transplanter during operation.
Walk-behind type
82
PAES 152:2010 Agricultural Machinery
Mechanical Rice Transplanter – Methods of Test
83
Ratio of the total number of hills with seedlings damaged by cutting, bending or crushing during transplanting to the total number of hills expressed in percentage.
Percent damaged hill
84
Ratio of the number of hills with seedlings to the total number of hill expressed in percentage.
Planting efficiency
85
PAES 153:2010 Agricultural Machinery
Hand Pump – Specification
86
Water pump powered by the movement of human arms.
Hand pump
87
Quantity used to express a form (or combination of forms) of the energy content of the liquid per unit weight of the liquid referred to any arbitrary datum.
Head
88
Implement used for cutting, displacing and/or shattering the soil to reduce soil strength and to bury or mix plant materials, pesticides, and fertilizers in the tillage layer.
Primary tillage implement
89
Based on PAES 120: 2001 Disc Harrow:
Single action
90
Is attached to the tractor’s lower hitch points and is raised/lowered by the tractor hitch as well as a remote hydraulic cylinder on the rear transport wheel.
Semi-mounted reversible disc plow
91
This plow is attached to the threepoint hitch and is fully carried by the tractor in transport. This type is usually limited in size (2-4 discs) due to tractor front-end stability and hydraulic lift capacity.
Tractor-mounted reversible disc plow
92
Attached to the tractor by three-point hitch linkages and are fully carried by the tractor during transport.
One-way disc plow
93
Based on PAES 144: 2005 Rice Drum Seeder – Methods of Test, what is the required traveling speed maintained during operation?
1 kph to 2 kph
94
This is a type of tractor power-driven seeder which drills and deposits the seeds at a specified rate and depth and in narrow-spaced rows. It cannot deposit the seeds in hills or even in check rows.
Seed drill
95
This is a type of tractor power-driven seeder which can deposit the seeds at a specified rate in hills and rows spaced to permit inter-row cultivation and also functions as a seed drill if required.
Row-crop planter
96
This is a type of row-crop planter which is designed to deposit one or more seeds in a hill at equal intervals.
Hill-drop planter
97
This is a type of row-crop planter which enables operator to perform hill planting at definite spacing (in checks or squares). This facilitates mechanical weed control and other operations.
Checkrow planter
98
Part of the plow which lifts, inverts and throws the furrow slice to one side.
Moldboard
99
Type of centrifugal pump with a casing made in the form of a spiral or volute curve.
Volute pump
100
Based on PAES 161:2011 Agricultural Machinery – Soil Auger: What is the recommended noise emitted by the tractor measured 50 mm away from the operator’s ear level?
Shall not be more than 92 db (A)
EXAM 6
EXAM 6
Heyzel Valdez · 100問 · 1年前EXAM 6
EXAM 6
100問 • 1年前EXAM 7
EXAM 7
Heyzel Valdez · 98問 · 1年前EXAM 7
EXAM 7
98問 • 1年前EXAM 8
EXAM 8
Heyzel Valdez · 100問 · 1年前EXAM 8
EXAM 8
100問 • 1年前EXAM 9
EXAM 9
Heyzel Valdez · 50問 · 1年前EXAM 9
EXAM 9
50問 • 1年前EXAM 1
EXAM 1
Heyzel Valdez · 100問 · 1年前EXAM 1
EXAM 1
100問 • 1年前EXAM 3
EXAM 3
Heyzel Valdez · 100問 · 1年前EXAM 3
EXAM 3
100問 • 1年前EXAM 4
EXAM 4
Heyzel Valdez · 100問 · 1年前EXAM 4
EXAM 4
100問 • 1年前EXAM 5
EXAM 5
Heyzel Valdez · 45問 · 1年前EXAM 5
EXAM 5
45問 • 1年前LE 1
LE 1
Heyzel Valdez · 100問 · 1年前LE 1
LE 1
100問 • 1年前LE 2
LE 2
Heyzel Valdez · 95問 · 1年前LE 2
LE 2
95問 • 1年前Group 1
Group 1
Heyzel Valdez · 100問 · 10ヶ月前Group 1
Group 1
100問 • 10ヶ月前Group 2
Group 2
Heyzel Valdez · 100問 · 10ヶ月前Group 2
Group 2
100問 • 10ヶ月前Group 3
Group 3
Heyzel Valdez · 100問 · 10ヶ月前Group 3
Group 3
100問 • 10ヶ月前Group 4
Group 4
Heyzel Valdez · 100問 · 10ヶ月前Group 4
Group 4
100問 • 10ヶ月前Group 5
Group 5
Heyzel Valdez · 100問 · 10ヶ月前Group 5
Group 5
100問 • 10ヶ月前Group 6
Group 6
Heyzel Valdez · 100問 · 10ヶ月前Group 6
Group 6
100問 • 10ヶ月前Group 7
Group 7
Heyzel Valdez · 100問 · 10ヶ月前Group 7
Group 7
100問 • 10ヶ月前Group 8
Group 8
Heyzel Valdez · 99問 · 10ヶ月前Group 8
Group 8
99問 • 10ヶ月前問題一覧
1
Based on PAES 116: 2001 small engine, the noise emitted by the engine measured 50 mm away from the operator’s ear level shall not be more than?
92 db
2
Two-wheel tractor speed limit on bare dirt road in kph.
4 to 6
3
Based on PAES 133: 2004 disc harrow – methods of test, what is the travelling speed to be maintained during operation?
7 kph to 8 kph
4
Type of weeder with rectangular, triangular or crescent shapes with cutting edges sharpened and hardened.
Blade type
5
Type of weeder with a straight, curved, round or square cross-section steel rods with sharply pointed and hardened soil engaging ends.
Tine type
6
Type of weeder which utilize either blade or tine type of soil working parts with short (0.15 m to 0.5 m), medium (>0.5 m to 1 m) and long (>1 m) handles.
Hand-held weeder
7
Type of weeder which utilizes either blade, tine or rotary soil working parts for dry and wet field weeding.
Push-type weeder
8
Based on PAES 115: 2000 centrifugal, mixed flow and axial flow water pumps – methods of test the water to be used during the test shall be clean with a temperature range of?
10 – 40 ºC
9
Type of weeder in which soil working parts are mounted on a frame or tool bar and pulled by an animal for dry field weeding.
Animal- drawn weeder
10
Type of rotary weeder driven by its own engine for wet field weeding.
Power-weeder
11
Type of weeder in which soil working parts are mounted on a frame or tool bar and pulled by either two- or four-wheel tractor for dry field weeding.
Tractor-mounted weeder
12
Type of granule applicator that uses wheel rotational motion to actuate application of granules. The granules are metered by a spinner plate or a screw attached to the ground wheel.
Trailing granule applicator
13
Type of knapsack granule applicator that makes use of gravitational force to apply granules.
Gravity knapsack
14
What type of field operation pattern?
[object Object]
Straight alternation pattern
15
Type of granule applicator that uses a spinner plate or a screw attached to the power take-off shaft to actuate metering of granules.
Three-point hitch type granule applicator
16
PAES 148:2010 Agricultural Machinery
Field Cultivator – Method of test
17
Power requirement of an implement being towed or pushed.
Drawbar power
18
Ratio between the productivity of a machine under field conditions and the theoretical maximum productivity.
Field efficiency
19
Horizontal distance perpendicular to the direction of travel between the outermost edges of the implement.
Implement width
20
Unplowed soil at the end of the furrow strip.
Head land
21
Type of pump which combines some of the features of both centrifugal and the axial flow pump and in which head is developed partly by the centrifugal force and partly by the lift of the vanes on the water.
Mixed flow pump
22
Tillage implement resembling a double moldboard, one left wing and one right wing used to make ridges and beds for planting and trenches for irrigation and drainage purposes.
AOTA
23
One movement of piston for each of the events such as intake, compression, power and exhaust.
Four-stroke cycle
24
Based on PAES 118: 2001 four-wheel tractor, what is the allowable wheel slip for maximum efficiency for four-wheel drive tractor at firm soil.
6-10
25
One downward movement of piston for the events exhaust and intake and one upward movement of piston for the events compression and power.
Two-stroke cycle
26
Type of engine where the combustion of fuel takes place inside the cylinder.
Internal combustion engine
27
Fuel and air mixture is first introduced inside the cylinder in gaseous condition. It is then compressed and ignited resulting to the generation of power.
Spark ignition engine
28
I-head arrangement of valves wherein the intake and exhaust valves are located in the cylinder head.
Overhead valve (ohv)
29
System in which water/liquid-coolant serves as the cooling medium which circulates in the water jackets to absorb the heat of the engine.
AOTA
30
Based on PAES 137:2004 agricultural trailer – methods of test, what is the maximum speed of operation for two-wheel tractor?
10 kph
31
What type of field operation pattern?
[object Object]
Circuitous pattern turn strips at corner diagonals
32
Compression ignition engine
33
Engine in which combustion occurs through the initiation of a spark on the fuel and air mixture
Spark ignition engine
34
Based on PAES 112: 2000 Lever-Operated Knapsack Sprayer, the tank shall have a minimum capacity of how many liters?
10
35
Vertical distance from base plane of the pump to the free level of water source.
Static suction head (h1)
36
PAES 149:2010 Agricultural Machinery
Subsoiler– Specifications
37
Part of the transplanting arm that picks rice seedlings.
Grasping fork
38
Modified wheel used in transplanters to facilitate movement in the field.
Paddle wheel
39
Rice seedlings grown in nursery for transplanting wherein the soil is retained with the roots for transplanting.
Soil-bearing seedlings
40
Type of mechanical rice transplanter designed for handling rice seedlings that were grown with mat. Soil and fertilizers were mixed thoroughly and filled uniformly in seedling boxes when growing the seedlings.
Soil-bearing seedling type or mat type
41
Steel rod that connects the pump handle to the plunger assembly within the cylinder.
Pump rod/plunger rod
42
Maximum distance that the plunger moves when the handle is moved.
Stroke
43
Type of force type hand pump that discharges water on both forward and back strokes.
Double acting
44
What type of field operation pattern?
[object Object]
Circuitous pattern 270 degrees turns from boundaries or center
45
Power recommended by the manufacturer for satisfactory operation under continuous duty condition within a specified speed range.
Continuous brake power
46
Type of weeder with curved or straight spikes or puddles radially attached to a common axle, which rotate to uproot and bury weeds.
Rotary type
47
Based on PAES walking-type agricultural tractor (pull-type),the noise emitted by the tractor measured 50 mm away from the operator’s ear level shall not be more than?
92 db (A)
48
Power output of a “fully equipped” engine.
Net power
49
Highest power developed.
Peak brake power
50
Based on PAES 112: 2000 Lever-Operated Knapsack Sprayer, the sprayer shall have a minimum volumetric efficiency of?
80%
51
Bar at the rear of a tractor to which implements are hitched.
Drawbar
52
PAES 154:2010 Agricultural Machinery
Hand Pump – Methods of Test
53
Operation of the pump from the topmost position of the handle to its lowest position.
Full stroke
54
PAES 156:2010 Agricultural Machinery
Mist Blower – Methods of Test
55
Type of power sprayer mounted on a steel frame which is carried by at least two (2) operators for transport.
Frame mounted power sprayer
56
PAES 158:2011 Agricultural Machinery
Power sprayer for mango – Methods of Test
57
Component of the sugarcane planter that cuts the sugarcane billets and drops it into the furrow.
Feeding shank
58
Agricultural equipment used for planting sugarcane billets.
Sugarcane planter
59
Based on PAES 155:2010 agricultural machinery – mist blower: What is the minimum net weight of mist blower?
15 kg
60
Self-propelled, wheeled vehicle having two axles designed to carry, pull or propel agricultural implements and machines.
Four-wheel tractor
61
What type of field operation pattern?
[object Object]
Circuitous pattern square corners
62
Combination of one upper link and two lower links, each articulated to the tractor and the implement at opposite ends in order to connect the implement to the tractor.
Three-point linkage
63
Based on PAES 137:2004 agricultural trailer – methods of test, what is the maximum speed of operation for four-wheel tractor?
20 kph
64
Articulated connection between a link and the implement.
Hitch point
65
Articulated connection between a link and the tractor.
Link point
66
Power measured at the flywheel or the crankshaft
engine power
67
Implement used to pulverize the soil to attain a better soil tilt for the seed germination and growth.
Disc harrow
68
Consists of two or more gangs, in which a set of two gangs follows behind the front gangs and is arranged in such a way that the discs on the front gangs throw the soil in one direction (usually outward) and the discs on the rear gangs throw the soil in the opposite direction.
Tandem disc harrow
69
Operation that cuts and throws the soil away from the base of plants.
Off barring
70
Based on PAES 155:2010 agricultural machinery – mist blower: What is the minimum air speed of mist blower?
90 m/s
71
Any group of different tillage operation, following primary tillage, which are designed to create refined soil conditions before the seed is planted.
Secondary tillage
72
Spade-shaped, V-pointed soil working tool, which is used for various plowstocks, cultivators, grain drills, and soil scarifiers.
Shovel
73
Operation which is performed to cut the soil with partial or complete soil inversion.
Moldboard plowing
74
Implement which works under the combined principles of the regular disc plow and harrow.
Plow-harrow
75
Implement used for broadcast or strip tillage and is also used as chemical incorporator and as row crop cultivator.
Rotary tiller
76
Based on PAES 153:2010 agricultural machinery – hand pump: Force type hand pump shall lift the water up to a height of how many meters from the ground level?
15 m
77
Implement which consists of two horizontal power driven spiral flanged shafts which rotate vertically.
Aota
78
Auxiliary component of the subsoiler that helps maintain uniform operating depth and for adjusting depth of cut.
Gauge wheel
79
Tillage which constitutes the initial major soil-working operation, normally designed to reduce soil strength, cover plant materials, and rearrange aggregates.
Primary tillage
80
Structural member primarily used for attaching a tillage tool to a beam.
Shank
81
Type of self-propelled rice transplanter wherein the operator walks behind the transplanter during operation.
Walk-behind type
82
PAES 152:2010 Agricultural Machinery
Mechanical Rice Transplanter – Methods of Test
83
Ratio of the total number of hills with seedlings damaged by cutting, bending or crushing during transplanting to the total number of hills expressed in percentage.
Percent damaged hill
84
Ratio of the number of hills with seedlings to the total number of hill expressed in percentage.
Planting efficiency
85
PAES 153:2010 Agricultural Machinery
Hand Pump – Specification
86
Water pump powered by the movement of human arms.
Hand pump
87
Quantity used to express a form (or combination of forms) of the energy content of the liquid per unit weight of the liquid referred to any arbitrary datum.
Head
88
Implement used for cutting, displacing and/or shattering the soil to reduce soil strength and to bury or mix plant materials, pesticides, and fertilizers in the tillage layer.
Primary tillage implement
89
Based on PAES 120: 2001 Disc Harrow:
Single action
90
Is attached to the tractor’s lower hitch points and is raised/lowered by the tractor hitch as well as a remote hydraulic cylinder on the rear transport wheel.
Semi-mounted reversible disc plow
91
This plow is attached to the threepoint hitch and is fully carried by the tractor in transport. This type is usually limited in size (2-4 discs) due to tractor front-end stability and hydraulic lift capacity.
Tractor-mounted reversible disc plow
92
Attached to the tractor by three-point hitch linkages and are fully carried by the tractor during transport.
One-way disc plow
93
Based on PAES 144: 2005 Rice Drum Seeder – Methods of Test, what is the required traveling speed maintained during operation?
1 kph to 2 kph
94
This is a type of tractor power-driven seeder which drills and deposits the seeds at a specified rate and depth and in narrow-spaced rows. It cannot deposit the seeds in hills or even in check rows.
Seed drill
95
This is a type of tractor power-driven seeder which can deposit the seeds at a specified rate in hills and rows spaced to permit inter-row cultivation and also functions as a seed drill if required.
Row-crop planter
96
This is a type of row-crop planter which is designed to deposit one or more seeds in a hill at equal intervals.
Hill-drop planter
97
This is a type of row-crop planter which enables operator to perform hill planting at definite spacing (in checks or squares). This facilitates mechanical weed control and other operations.
Checkrow planter
98
Part of the plow which lifts, inverts and throws the furrow slice to one side.
Moldboard
99
Type of centrifugal pump with a casing made in the form of a spiral or volute curve.
Volute pump
100
Based on PAES 161:2011 Agricultural Machinery – Soil Auger: What is the recommended noise emitted by the tractor measured 50 mm away from the operator’s ear level?
Shall not be more than 92 db (A)