問題一覧
1
Type of driving mechanism that can obtain any fan/blower speed by controlling the pulley ratio.
Belt-Drive Fan/Blower
2
Tube that is being connected to a manometer and is being used to measure the static and total force of air in the testing duct of fan/blower.
Pitot tube
3
Fire resistant surface located at the heating chamber of the biomass furnace.
Hearth
4
Panel made of consolidated ligno-cellulosic fibers with the primary bond derived from their inherent adhesive properties and/or the addition of resin or other materials.
Fiberboard
5
Based on PAES 224: 2005 Rice Combine (Circulated): What is the maximum unthreshed loss?
0.2%
6
Type of plywood intended for inside use, having limited moisture resistance.
Interior plywood
7
Based on PAES 204:2000 mechanical rice thresher: What is the maximum unthreshed loss?
0.2%
8
Fine powder by-product of corn milling process.
Floured corn
9
Sheet of plywood.
Panel
10
Assembled product made of layers of veneers and/or lumber core held together by an adhesive, the chief characteristics of which is the alternate cross layers, distributing the longitudinal wood strength.
Plywood
11
Based on PAES 204:2000 mechanical rice thresher: What is the maximum scattering loss?
0.3%
12
High density fiberboard with smooth surfaces on both sides.
Smooth-two-sides (s2s)
13
Sheets are intended for external applications where they may be subjected to the direct action of sun and rain. They may be supplied coated or uncoated. These sheets are further classified into three categories according to their modulus of rupture.
Fiber-cement flat sheets type a
14
Based on PAES 256:2011 Corn Picker: What is the minimum picking efficiency?
99.5%
15
This fan causes the air/gas to enter from the side fan wheel, deflected 90 degrees and Accelerates due to centrifugal force as it flows over the fan blades and exits the fan housing.
Centrifugal Fans
16
Based on PAES 208:2000 Power-Operated Corn Sheller: What is the maximum unshelled loss?
0.5%
17
Slender and elongated fibrous materials extracted from coconut husk.
Coconut coir
18
Based on PAES 246:2010 Dehusked Corn Dryer: What is the minimum heating system efficiency for petroleum based fuel(direct-fired)?
90%
19
Keys whose longitudinal sides are parallel with each other.
Parallel keys
20
Type of threshing cylinder wherein spikes or pegs are attached on the periphery of the cylinder in tandem or in helical arrangements.
Peg-tooth cylinder
21
Based on PAES 208:2000 Power-Operated Corn Sheller: What is the maximum separation loss?
1%
22
Type of thresher which detaches the grains by feeding the cut plants into the machine.
Throw-in thresher
23
Based on PAES 258:2011Feed Mixer: What is the maximum noise level?
96 dB
24
The torque is transmitted through a comparatively soft rubber in compression.
Rubber-flexible coupling
25
Based on PAES 204:2000 mechanical rice thresher: What is the minimum threshing efficiency?
99.8%
26
Keys with a semi-circular crosssection.
Woodruff keys
27
Polymers consisting of more than one monomer.
Copolymer
28
Based on PAES 246:2010 Dehusked Corn Dryer: What is the minimum heating system efficiency for biomass fuel (indirectfired)?
50%
29
Dehulled palay (husk/hull removed) with the bran layer still intact?
Brown rice
30
Based on PAES 204:2000 mechanical rice thresher: What is the maximum separation loss?
1.3%
31
Based on PAES 208:2000 Power-Operated Corn Sheller: What is the minimum shelling efficiency?
99.5%
32
Measure of the ability of the machine to remove the hulls.
Coefficient of hulling
33
Non-ionic chemical bond formed by stored electrons.
Covalent
34
Based on PAES 224: 2005 Rice Combine (Circulated): What is the maximum scaterring loss?
0.3%
35
Biomass furnace that uses gravitational force on feeding the biomass fuel.
Gravity direct-fired biomass furnace
36
Wire mesh or perforated metal sheet, moving in back-and-forth direction, permitting smaller particles to fall through the openings and larger particles to remain on top.
Sifter
37
Based on PAES 204:2000 mechanical rice thresher: What is the maximum blower loss?
1.2%
38
Wheel having flat or crowned face used to transmit motion and power by means of flat belts.
Flat belt pulley
39
Based on PAES 201:2000 Heated-Air Mechanical Grain Dryer: What is the maximum noise emitted by the heated-air mechanical grain dryer?
Ninety two dB
40
Uses ambient air to be heated inside or outside the heat exchanger and be used as drying air.
Dry type biomass furnace indirectfired
41
Based on PAES 204:2000 mechanical rice thresher: What is the minimum threshing recovery?
97%
42
Component of rice mill made of rubber bonded to an inner metal drum core use for hulling.
Rubber roll
43
Based on PAES 208:2000 Power-Operated Corn Sheller: What is the maximum blower loss?
1%
44
The outer layer of abaca leaf sheath which contains the primary fiber.
Tuxy
45
Based on PAES 208:2000 Power-Operated Corn Sheller: What is the minimum shelling recovery?
97.0%
46
Ceramic fiber lining heat resisting lining of the furnace using ceramic materials.
Ceramic fiber lining
47
Based on PAES 246:2010 Dehusked Corn Dryer: What is the minimum heating system efficiency for biomass fuel (direct-fired)?
65%
48
Classification system that indicates the uniformity of grind in the resultant product; sum of the weight fractions retained above each sieve divided by 100.
Fineness modulus
49
Based on PAES 208:2000 Power-Operated Corn Sheller: What is the minimum shelling efficiency?
99.5%
50
Forage chopper which uses a feeding mechanism consisting of two feed rolls, or other means such as an auger, to advance the crop to the cutting mechanism.
Semi-precision-cut forage chopper
EXAM 6
EXAM 6
Heyzel Valdez · 100問 · 1年前EXAM 6
EXAM 6
100問 • 1年前EXAM 7
EXAM 7
Heyzel Valdez · 98問 · 1年前EXAM 7
EXAM 7
98問 • 1年前EXAM 8
EXAM 8
Heyzel Valdez · 100問 · 1年前EXAM 8
EXAM 8
100問 • 1年前EXAM 1
EXAM 1
Heyzel Valdez · 100問 · 1年前EXAM 1
EXAM 1
100問 • 1年前EXAM 2
EXAM 2
Heyzel Valdez · 100問 · 1年前EXAM 2
EXAM 2
100問 • 1年前EXAM 3
EXAM 3
Heyzel Valdez · 100問 · 1年前EXAM 3
EXAM 3
100問 • 1年前EXAM 4
EXAM 4
Heyzel Valdez · 100問 · 1年前EXAM 4
EXAM 4
100問 • 1年前EXAM 5
EXAM 5
Heyzel Valdez · 45問 · 1年前EXAM 5
EXAM 5
45問 • 1年前LE 1
LE 1
Heyzel Valdez · 100問 · 1年前LE 1
LE 1
100問 • 1年前LE 2
LE 2
Heyzel Valdez · 95問 · 1年前LE 2
LE 2
95問 • 1年前Group 1
Group 1
Heyzel Valdez · 100問 · 10ヶ月前Group 1
Group 1
100問 • 10ヶ月前Group 2
Group 2
Heyzel Valdez · 100問 · 10ヶ月前Group 2
Group 2
100問 • 10ヶ月前Group 3
Group 3
Heyzel Valdez · 100問 · 10ヶ月前Group 3
Group 3
100問 • 10ヶ月前Group 4
Group 4
Heyzel Valdez · 100問 · 10ヶ月前Group 4
Group 4
100問 • 10ヶ月前Group 5
Group 5
Heyzel Valdez · 100問 · 10ヶ月前Group 5
Group 5
100問 • 10ヶ月前Group 6
Group 6
Heyzel Valdez · 100問 · 10ヶ月前Group 6
Group 6
100問 • 10ヶ月前Group 7
Group 7
Heyzel Valdez · 100問 · 10ヶ月前Group 7
Group 7
100問 • 10ヶ月前Group 8
Group 8
Heyzel Valdez · 99問 · 10ヶ月前Group 8
Group 8
99問 • 10ヶ月前問題一覧
1
Type of driving mechanism that can obtain any fan/blower speed by controlling the pulley ratio.
Belt-Drive Fan/Blower
2
Tube that is being connected to a manometer and is being used to measure the static and total force of air in the testing duct of fan/blower.
Pitot tube
3
Fire resistant surface located at the heating chamber of the biomass furnace.
Hearth
4
Panel made of consolidated ligno-cellulosic fibers with the primary bond derived from their inherent adhesive properties and/or the addition of resin or other materials.
Fiberboard
5
Based on PAES 224: 2005 Rice Combine (Circulated): What is the maximum unthreshed loss?
0.2%
6
Type of plywood intended for inside use, having limited moisture resistance.
Interior plywood
7
Based on PAES 204:2000 mechanical rice thresher: What is the maximum unthreshed loss?
0.2%
8
Fine powder by-product of corn milling process.
Floured corn
9
Sheet of plywood.
Panel
10
Assembled product made of layers of veneers and/or lumber core held together by an adhesive, the chief characteristics of which is the alternate cross layers, distributing the longitudinal wood strength.
Plywood
11
Based on PAES 204:2000 mechanical rice thresher: What is the maximum scattering loss?
0.3%
12
High density fiberboard with smooth surfaces on both sides.
Smooth-two-sides (s2s)
13
Sheets are intended for external applications where they may be subjected to the direct action of sun and rain. They may be supplied coated or uncoated. These sheets are further classified into three categories according to their modulus of rupture.
Fiber-cement flat sheets type a
14
Based on PAES 256:2011 Corn Picker: What is the minimum picking efficiency?
99.5%
15
This fan causes the air/gas to enter from the side fan wheel, deflected 90 degrees and Accelerates due to centrifugal force as it flows over the fan blades and exits the fan housing.
Centrifugal Fans
16
Based on PAES 208:2000 Power-Operated Corn Sheller: What is the maximum unshelled loss?
0.5%
17
Slender and elongated fibrous materials extracted from coconut husk.
Coconut coir
18
Based on PAES 246:2010 Dehusked Corn Dryer: What is the minimum heating system efficiency for petroleum based fuel(direct-fired)?
90%
19
Keys whose longitudinal sides are parallel with each other.
Parallel keys
20
Type of threshing cylinder wherein spikes or pegs are attached on the periphery of the cylinder in tandem or in helical arrangements.
Peg-tooth cylinder
21
Based on PAES 208:2000 Power-Operated Corn Sheller: What is the maximum separation loss?
1%
22
Type of thresher which detaches the grains by feeding the cut plants into the machine.
Throw-in thresher
23
Based on PAES 258:2011Feed Mixer: What is the maximum noise level?
96 dB
24
The torque is transmitted through a comparatively soft rubber in compression.
Rubber-flexible coupling
25
Based on PAES 204:2000 mechanical rice thresher: What is the minimum threshing efficiency?
99.8%
26
Keys with a semi-circular crosssection.
Woodruff keys
27
Polymers consisting of more than one monomer.
Copolymer
28
Based on PAES 246:2010 Dehusked Corn Dryer: What is the minimum heating system efficiency for biomass fuel (indirectfired)?
50%
29
Dehulled palay (husk/hull removed) with the bran layer still intact?
Brown rice
30
Based on PAES 204:2000 mechanical rice thresher: What is the maximum separation loss?
1.3%
31
Based on PAES 208:2000 Power-Operated Corn Sheller: What is the minimum shelling efficiency?
99.5%
32
Measure of the ability of the machine to remove the hulls.
Coefficient of hulling
33
Non-ionic chemical bond formed by stored electrons.
Covalent
34
Based on PAES 224: 2005 Rice Combine (Circulated): What is the maximum scaterring loss?
0.3%
35
Biomass furnace that uses gravitational force on feeding the biomass fuel.
Gravity direct-fired biomass furnace
36
Wire mesh or perforated metal sheet, moving in back-and-forth direction, permitting smaller particles to fall through the openings and larger particles to remain on top.
Sifter
37
Based on PAES 204:2000 mechanical rice thresher: What is the maximum blower loss?
1.2%
38
Wheel having flat or crowned face used to transmit motion and power by means of flat belts.
Flat belt pulley
39
Based on PAES 201:2000 Heated-Air Mechanical Grain Dryer: What is the maximum noise emitted by the heated-air mechanical grain dryer?
Ninety two dB
40
Uses ambient air to be heated inside or outside the heat exchanger and be used as drying air.
Dry type biomass furnace indirectfired
41
Based on PAES 204:2000 mechanical rice thresher: What is the minimum threshing recovery?
97%
42
Component of rice mill made of rubber bonded to an inner metal drum core use for hulling.
Rubber roll
43
Based on PAES 208:2000 Power-Operated Corn Sheller: What is the maximum blower loss?
1%
44
The outer layer of abaca leaf sheath which contains the primary fiber.
Tuxy
45
Based on PAES 208:2000 Power-Operated Corn Sheller: What is the minimum shelling recovery?
97.0%
46
Ceramic fiber lining heat resisting lining of the furnace using ceramic materials.
Ceramic fiber lining
47
Based on PAES 246:2010 Dehusked Corn Dryer: What is the minimum heating system efficiency for biomass fuel (direct-fired)?
65%
48
Classification system that indicates the uniformity of grind in the resultant product; sum of the weight fractions retained above each sieve divided by 100.
Fineness modulus
49
Based on PAES 208:2000 Power-Operated Corn Sheller: What is the minimum shelling efficiency?
99.5%
50
Forage chopper which uses a feeding mechanism consisting of two feed rolls, or other means such as an auger, to advance the crop to the cutting mechanism.
Semi-precision-cut forage chopper