2

10 questions • 2024-05-14
Alexandra Svobodová
Report

Question

A network administrator is designing the layout of a new wireless network. Which three areas of concern should be accounted for when building a wireless network? (Choose three.)

  • coverage area

  • security

  • extensive cabling

  • mobility options

  • packet collision

  • interference

Question

Refer to the exhibit. What is wrong with the displayed termination?

  • The wrong type of connector is being used.

  • The woven copper braid should not have been removed

  • The wires are too thick for the connector that is used.

  • The untwisted length of each wire is too long.

  • Skip

Question

A network administrator notices that some newly installed Ethernet cabling is carrying corrupt and distorted data signals. The new cabling was installed in the ceiling close to fluorescent lights and electrical equipment. Which two factors may interfere with the copper cabling and result in signal distortion and data corruption? (Choose two.)

  • crosstalk

  • RFI

  • extended length of cabling

  • signal attenuation

  • EMI

Question

Data is being sent from a source PC to a destination server. Which three statements correctly describe the function of TCP or UDP in this situation? (Choose three.)

  • UDP segments are encapsulated within IP packets for transport across the network.

  • TCP is the preferred protocol when a function requires lower network overhead.

  • The UDP destination port number identifies the application or service on the server which will handle the data

  • The TCP source port number identifies the sending host on the network.

  • The source port field identifies the running application or service that will handle data returning to the PC

  • The TCP process running on the PC randomly selects the destination port when establishing a session with the server

Question

Match the application protocols to the correct transport protocols.

  • ok

  • nn

Question

A group of Windows PCs in a new subnet has been added to an Ethernet network. When testing the connectivity, a technician finds that these PCs can access local network resources but not the Internet resources. To troubleshoot the problem, the technician wants to initially confirm the IP address and DNS configurations on the PCs, and also verify connectivity to the local router. Which three Windows CLI commands and utilities will provide the necessary information? (Choose three.)

  • nslookup

  • ping

  • telnet

  • arp -a

  • tracert

  • ipconfig

  • netsh interface ipv6 show neighbor

Question

What two pieces of information are displayed in the output of the show ip interface brief command? (Choose two.)

  • Layer 1 statuses

  • next-hop addresses

  • IP addresses

  • speed and duplex settings

  • MAC addresses

  • interface descriptions

Question

A network administrator is adding a new LAN to a branch office. The new LAN must support 25 connected devices. What is the smallest network mask that the network administrator can use for the new network?

  • 255.255.255.128

  • 255.255.255.224

  • 255.255.255.240

  • 255.255.255.192

  • Skip

Question

Which frame field is created by a source node and used by a destination node to ensure that a transmitted data signal has not been altered by interference, distortion, or signal loss?

  • error correction process field

  • flow control field

  • User Datagram Protocol field

  • frame check sequence field

  • transport layer error check field

  • Skip

Question

What is a function of the data link layer?

  • provides the formatting of data

  • provides delivery of data between two applications

  • provides end-to-end delivery of data between hosts

  • provides for the exchange of frames over a common local media

  • Skip

2

TestMaker

Score

0 / 10

Correct rate

0%

Correct: 0

Incorrect: 0

Unanswered: 10

 
ankimaker.com

Question list

  • 1

    A network administrator is designing the layout of a new wireless network. Which three areas of concern should be accounted for when building a wireless network? (Choose three.)

    security, interference, coverage area

  • 2

    Refer to the exhibit. What is wrong with the displayed termination?

    The untwisted length of each wire is too long.

  • 3

    A network administrator notices that some newly installed Ethernet cabling is carrying corrupt and distorted data signals. The new cabling was installed in the ceiling close to fluorescent lights and electrical equipment. Which two factors may interfere with the copper cabling and result in signal distortion and data corruption? (Choose two.)

    RFI, EMI

  • 4

    Data is being sent from a source PC to a destination server. Which three statements correctly describe the function of TCP or UDP in this situation? (Choose three.)

    The source port field identifies the running application or service that will handle data returning to the PC, UDP segments are encapsulated within IP packets for transport across the network., The UDP destination port number identifies the application or service on the server which will handle the data

  • 5

    Match the application protocols to the correct transport protocols.

    ok

  • 6

    A group of Windows PCs in a new subnet has been added to an Ethernet network. When testing the connectivity, a technician finds that these PCs can access local network resources but not the Internet resources. To troubleshoot the problem, the technician wants to initially confirm the IP address and DNS configurations on the PCs, and also verify connectivity to the local router. Which three Windows CLI commands and utilities will provide the necessary information? (Choose three.)

    ping, ipconfig, nslookup

  • 7

    What two pieces of information are displayed in the output of the show ip interface brief command? (Choose two.)

    IP addresses, Layer 1 statuses

  • 8

    A network administrator is adding a new LAN to a branch office. The new LAN must support 25 connected devices. What is the smallest network mask that the network administrator can use for the new network?

    255.255.255.224

  • 9

    Which frame field is created by a source node and used by a destination node to ensure that a transmitted data signal has not been altered by interference, distortion, or signal loss?

    frame check sequence field

  • 10

    What is a function of the data link layer?

    provides for the exchange of frames over a common local media