10

10 questions • 2024-05-14
Alexandra Svobodová
Report

Question

What is the purpose of the TCP sliding window?

  • to end communication when data transmission is complete

  • to request that a source decrease the rate at which it transmits data

  • to inform a source to retransmit data from a specific point forward

  • to ensure that segments arrive in order at the destination

  • Skip

Question

What technique is used with UTP cable to help protect against signal interference from crosstalk?

  • wrapping a foil shield around the wire pairs

  • encasing the cables within a flexible plastic sheath

  • terminating the cable with special grounded connectors

  • twisting the wires together into pairs

  • Skip

Question

A network technician is researching the use of fiber optic cabling in a new technology center. Which two issues should be considered before implementing fiber optic media? (Choose two.)

  • Fiber optic cabling requires different termination and splicing expertise from what copper cabling requires.

  • Fiber optic cabling is susceptible to loss of signal due to RFI.

  • Fiber optic cabling requires specific grounding to be immune to EMI.

  • Fiber optic cable is able to withstand rough handling.

  • Fiber optic provides higher data capacity but is more expensive than copper cabling.

Question

Users are reporting longer delays in authentication and in accessing network resources during certain time periods of the week. What kind of information should network engineers check to find out if this situation is part of a normal network behavior?

  • the network performance baseline

  • network configuration files

  • syslog records and messages

  • debug output and packet captures

  • Skip

Question

A user is complaining that an external web page is taking longer than normal to load.The web page does eventually load on the user machine. Which tool should the technician use with administrator privileges in order to locate where the issue is in the network?

  • ping

  • tracert

  • nslookup

  • ipconfig /displaydns

  • Skip

Question

A client packet is received by a server. The packet has a destination port number of 53. What service is the client requesting?

  • SSH

  • DNS

  • Telnet

  • FTP

  • Skip

Question

Refer to the exhibit. PC1 issues an ARP request because it needs to send a packet to PC2. In this scenario, what will happen next?

  • RT1 will send an ARP reply with its Fa0/0 MAC address.

  • SW1 will send an ARP reply with the PC2 MAC address.

  • SW1 will send an ARP reply with its Fa0/1 MAC address.

  • RT1 will send an ARP reply with the PC2 MAC address.

  • PC2 will send an ARP reply with its MAC address.

  • Skip

Question

Match the description to the IPv6 addressing component. (Not all options are used.)

  • nn

  • jj

  • Skip

Question

An IPv6 enabled device sends a data packet with the destination address of FF02::2. What is the target of this packet?

  • all IPv6 enabled devices across the network

  • all IPv6 enabled devices on the local link

  • all IPv6 DHCP servers

  • all IPv6 configured routers on the local link

  • Skip

Question

What are the three parts of an IPv6 global unicast address? (Choose three.)

  • subnet ID

  • global routing prefix

  • subnet mask

  • broadcast address

  • interface ID

10

TestMaker

Score

0 / 10

Correct rate

0%

Correct: 0

Incorrect: 0

Unanswered: 10

 
ankimaker.com

Question list

  • 1

    What is the purpose of the TCP sliding window?

    to request that a source decrease the rate at which it transmits data

  • 2

    What technique is used with UTP cable to help protect against signal interference from crosstalk?

    twisting the wires together into pairs

  • 3

    A network technician is researching the use of fiber optic cabling in a new technology center. Which two issues should be considered before implementing fiber optic media? (Choose two.)

    Fiber optic cabling requires different termination and splicing expertise from what copper cabling requires., Fiber optic provides higher data capacity but is more expensive than copper cabling.

  • 4

    Users are reporting longer delays in authentication and in accessing network resources during certain time periods of the week. What kind of information should network engineers check to find out if this situation is part of a normal network behavior?

    the network performance baseline

  • 5

    A user is complaining that an external web page is taking longer than normal to load.The web page does eventually load on the user machine. Which tool should the technician use with administrator privileges in order to locate where the issue is in the network?

    tracert

  • 6

    A client packet is received by a server. The packet has a destination port number of 53. What service is the client requesting?

    DNS

  • 7

    Refer to the exhibit. PC1 issues an ARP request because it needs to send a packet to PC2. In this scenario, what will happen next?

    PC2 will send an ARP reply with its MAC address.

  • 8

    Match the description to the IPv6 addressing component. (Not all options are used.)

    jj

  • 9

    An IPv6 enabled device sends a data packet with the destination address of FF02::2. What is the target of this packet?

    all IPv6 configured routers on the local link

  • 10

    What are the three parts of an IPv6 global unicast address? (Choose three.)

    subnet ID, global routing prefix, interface ID