問題一覧
1
In considering your target market, a describes two or more customer segments that are linked but independent of each other
Multisided market
2
What is the coordination number of a face- centered cubic unit cell?
12
3
Which of the following statements define environmental chemistry?
study of chemical reactions that occur in water, air, land, biological habitats, and human activities
4
The command ‘pedit’ is used for _______________
editing of poly line properties
5
The statement of cash flows is divided into _________ activities.
operating, investing, and financing
6
A 6 inch copper wire is stretched to a total length of 6.05 inches. What is the strain?
0.0083
7
________ is a doctrine in copyright law that permits limited use of copyrighted material without having to first acquire permission from the copyright holder.
Fair Use
8
How many sections are there in R.A. 9292?
43
9
Which of the following flows is also called sanitary sewage?
Dry weather flow
10
The Practice of the Profession is provided in what section of R. A. No. 9292?
Section 27
11
During the tension deformation of a metal test bar, necking occurs when_____.
The ultimate tensile strength is reached
12
The most common file extension for CAD drawings consisting of vector image data. This is the native format for most CAD applications.
.dwg
13
According to Book 2 of the Philippine Electronics Code, a sufficient number of audible notification appliances shall be used to produce a minimum of ____ dBA, or 10 DB above ambient noise level having a duration of at least ____ seconds, whichever is greater.
65, 30
14
What tensile stress is required to produce a strain of 8 x 10-5 in aluminum? Young’s modulus of aluminum is 70 GPa.
5.6 MPa
15
An engineer who enjoys a good reputation for his many years of work in constructing large public buildings and who is currently engaged in the conversion of an old school into a condominium is asked by a neighbor to interior design her 80-year old, 12-room house. What should the engineer do?
Turn down the job
16
A bank gives a loan to a company to purchase equipment worth P 10,000,000 at an interest rate of 18% compounded annually. This amount should be repaid in 15 yearly equal installments. Find the installment amount that the company has to pay to the bank.
P 1,964,000
17
Donald's Shawarma Stand started the year with total assets of P210,000 and total liabilities of P120,000. During the year, the business recorded P330,000 in revenues, P165,000 in expenses, and dividends of P60,000. What is the company's net income?
P 165,000
18
RA 9514 is also known as the ____.
Revised Fire Code of the Philippines
19
This includes first cost and later expenditures that have substantial and enduring value (generally more than one year) for upgrading, expanding, or changing the functional use of a facility, product, or process.
Investment cost
20
What is the title of Book 2 (Volume 2) of the Philippine Electronics Code?
Fire Detection and Alarm System
21
The sum of those costs, including consequential costs such as schedule impact, associated with the rejection or rework of a product, process, or service due to a departure from established requirements.
Deviation costs
22
Which type of load is NOT resisted by a pinned joint?
Moment
23
A P50,000 bond is being sold. The interest rate given to the holder is 8% (P2,000 to the bond holder every 6 months). The bond life is 10 years. At that time, the owner will receive the P50,000 back plus the last P2,000 interest payment. If your minimum interest rate is 12% compounded semiannually, what would you pay for the bond?
P 38,530.80
24
A circular shaft subjected to pure torsion will display which of the following?
Maximum shear stress at the outer fiber
25
When carbon is dissolved in iron to a concentration of 0.5 weight percent carbon and the alloy is heated to 900 degrees Celsius, what phase is present?
Austenite
26
A 3 mm thick aluminum sheet is cut with a 4 cm diameter round punch. If the punch exerts a force of 6 kN, what is the shear stress in the sheet?
15.9 MPa
27
If the load on a test material is carried beyond the ultimate tensile strength of the material, it will
Continue bending until strain failure occurs
28
Miss Ella who is now 35 years old is planning for her retired life. She plans to invest an equal sum of P 10,000 at the end of every year for the next 25 years starting from the end of next year. The bank gives 20% interest rate, compounded annually. Find the maturity value of her account when she is 60 years old.
P 4,719,810
29
A person wishes to have a future sum of P 1,000,000 for his son’s education after 10 years from now. What is the single payment that he should deposit now so that he gets the desired amount after 10 years? The bank gives a 15% interest rate compounded annually.
P 247,200
30
The specific weight of a fluid is
The weight of the fluid per unit volume
31
The method of computing depreciation in which the annual charge is a fixed percentage of the depreciated book value at the beginning of the year to which the depreciation applies.
Declining balance depreciation
32
The maximum torque on a 15 cm diameter solid shaft is 13500 N-m. What is the maximum shear stress in the shaft?
20.4 MPa
33
When is the approval date of R.A. 9292?
April 17, 2004
34
The command ‘Explode’ is used for _________________________
breaking a poly line into individual segments
35
The major pathways of exposure to toxic agents are: I. Inhalation, II. Ingestion, III. Whole body, IV. Skin absorption, V. eyes and hands
I, II, IV
36
The value [(1 + i)n - 1]/[i(1 + i)n] is known as _________.
uniform series present worth factor
37
Decisions for which the analyst elects to consider several possible futures, the probabilities of which cannot be estimated.
Decisions under uncertainty and risk
38
What factor should you use if you want to solve for the uniform series value given a future value?
Sinking Fund Factor
39
The angle between isometric axes is ________ degrees.
120
40
______ refers to other act of transmitting misleading or inaccurate information about the source of the phone call or text message, with the intent to defraud, cause harm or wrongfully obtain anything of value.
Spoofing
41
The Penal Provision of R. A. No. 9292 is provided in what section of the law?
Section 35
42
Why is carbon dioxide called a greenhouse gas?
Because they absorb heat
43
The strengthening process involving the formation of fine distribution of a second phase is called____
Precipitation hardening
44
The ethical responsibility of an engineer (ranked from highest to least important) is to:
(1) Society (2) Client (3) Profession (4) Yourself
45
The command which is used to create a round corner between two lines is __________
Fillet
46
Which of the following types of bonding is characterized by a strong attraction between a lattice of positive ions and a sea of delocalized electrons?
Metallic
47
In which process of water softening, the chemicals are added to remove hardness from water?
Lime soda process
48
The date of effectivity of the Implementing Rules and Regulations (PRC resolution 1032) of the CPD Act of 2016 (RA 10912)
March 15, 2017
49
Which of the following elements does not have a face-centered cubic structure?
Sodium
50
A high-end gaming laptop was purchased for P200,000 and has an expected life of 7 years. At the end of 7 years, the salvage value is estimated to be P9,200. According to straight line depreciation and sinking fund depreciation, what is the book value of the computer at the end of 4 years? Interest is 3% per year.
P 90,971.43; P 95,825.13
elex1
elex1
Loloysan · 50問 · 1年前elex1
elex1
50問 • 1年前elex2
elex2
Loloysan · 50問 · 1年前elex2
elex2
50問 • 1年前ME1 & ME2_ ELEX
ME1 & ME2_ ELEX
Loloysan · 100問 · 1年前ME1 & ME2_ ELEX
ME1 & ME2_ ELEX
100問 • 1年前ME1_Math
ME1_Math
Loloysan · 50問 · 1年前ME1_Math
ME1_Math
50問 • 1年前Math2
Math2
Loloysan · 50問 · 1年前Math2
Math2
50問 • 1年前ME1 & ME2_MATH
ME1 & ME2_MATH
Loloysan · 100問 · 1年前ME1 & ME2_MATH
ME1 & ME2_MATH
100問 • 1年前rc2_elex
rc2_elex
Loloysan · 18問 · 1年前rc2_elex
rc2_elex
18問 • 1年前rc3_elex
rc3_elex
Loloysan · 25問 · 1年前rc3_elex
rc3_elex
25問 • 1年前geasME1
geasME1
Loloysan · 50問 · 1年前geasME1
geasME1
50問 • 1年前GEAS_ME1 & ME2
GEAS_ME1 & ME2
Loloysan · 100問 · 1年前GEAS_ME1 & ME2
GEAS_ME1 & ME2
100問 • 1年前est_ME1
est_ME1
Loloysan · 50問 · 1年前est_ME1
est_ME1
50問 • 1年前est_ME2
est_ME2
Loloysan · 50問 · 1年前est_ME2
est_ME2
50問 • 1年前est_ME1 & ME2
est_ME1 & ME2
Loloysan · 100問 · 1年前est_ME1 & ME2
est_ME1 & ME2
100問 • 1年前問題一覧
1
In considering your target market, a describes two or more customer segments that are linked but independent of each other
Multisided market
2
What is the coordination number of a face- centered cubic unit cell?
12
3
Which of the following statements define environmental chemistry?
study of chemical reactions that occur in water, air, land, biological habitats, and human activities
4
The command ‘pedit’ is used for _______________
editing of poly line properties
5
The statement of cash flows is divided into _________ activities.
operating, investing, and financing
6
A 6 inch copper wire is stretched to a total length of 6.05 inches. What is the strain?
0.0083
7
________ is a doctrine in copyright law that permits limited use of copyrighted material without having to first acquire permission from the copyright holder.
Fair Use
8
How many sections are there in R.A. 9292?
43
9
Which of the following flows is also called sanitary sewage?
Dry weather flow
10
The Practice of the Profession is provided in what section of R. A. No. 9292?
Section 27
11
During the tension deformation of a metal test bar, necking occurs when_____.
The ultimate tensile strength is reached
12
The most common file extension for CAD drawings consisting of vector image data. This is the native format for most CAD applications.
.dwg
13
According to Book 2 of the Philippine Electronics Code, a sufficient number of audible notification appliances shall be used to produce a minimum of ____ dBA, or 10 DB above ambient noise level having a duration of at least ____ seconds, whichever is greater.
65, 30
14
What tensile stress is required to produce a strain of 8 x 10-5 in aluminum? Young’s modulus of aluminum is 70 GPa.
5.6 MPa
15
An engineer who enjoys a good reputation for his many years of work in constructing large public buildings and who is currently engaged in the conversion of an old school into a condominium is asked by a neighbor to interior design her 80-year old, 12-room house. What should the engineer do?
Turn down the job
16
A bank gives a loan to a company to purchase equipment worth P 10,000,000 at an interest rate of 18% compounded annually. This amount should be repaid in 15 yearly equal installments. Find the installment amount that the company has to pay to the bank.
P 1,964,000
17
Donald's Shawarma Stand started the year with total assets of P210,000 and total liabilities of P120,000. During the year, the business recorded P330,000 in revenues, P165,000 in expenses, and dividends of P60,000. What is the company's net income?
P 165,000
18
RA 9514 is also known as the ____.
Revised Fire Code of the Philippines
19
This includes first cost and later expenditures that have substantial and enduring value (generally more than one year) for upgrading, expanding, or changing the functional use of a facility, product, or process.
Investment cost
20
What is the title of Book 2 (Volume 2) of the Philippine Electronics Code?
Fire Detection and Alarm System
21
The sum of those costs, including consequential costs such as schedule impact, associated with the rejection or rework of a product, process, or service due to a departure from established requirements.
Deviation costs
22
Which type of load is NOT resisted by a pinned joint?
Moment
23
A P50,000 bond is being sold. The interest rate given to the holder is 8% (P2,000 to the bond holder every 6 months). The bond life is 10 years. At that time, the owner will receive the P50,000 back plus the last P2,000 interest payment. If your minimum interest rate is 12% compounded semiannually, what would you pay for the bond?
P 38,530.80
24
A circular shaft subjected to pure torsion will display which of the following?
Maximum shear stress at the outer fiber
25
When carbon is dissolved in iron to a concentration of 0.5 weight percent carbon and the alloy is heated to 900 degrees Celsius, what phase is present?
Austenite
26
A 3 mm thick aluminum sheet is cut with a 4 cm diameter round punch. If the punch exerts a force of 6 kN, what is the shear stress in the sheet?
15.9 MPa
27
If the load on a test material is carried beyond the ultimate tensile strength of the material, it will
Continue bending until strain failure occurs
28
Miss Ella who is now 35 years old is planning for her retired life. She plans to invest an equal sum of P 10,000 at the end of every year for the next 25 years starting from the end of next year. The bank gives 20% interest rate, compounded annually. Find the maturity value of her account when she is 60 years old.
P 4,719,810
29
A person wishes to have a future sum of P 1,000,000 for his son’s education after 10 years from now. What is the single payment that he should deposit now so that he gets the desired amount after 10 years? The bank gives a 15% interest rate compounded annually.
P 247,200
30
The specific weight of a fluid is
The weight of the fluid per unit volume
31
The method of computing depreciation in which the annual charge is a fixed percentage of the depreciated book value at the beginning of the year to which the depreciation applies.
Declining balance depreciation
32
The maximum torque on a 15 cm diameter solid shaft is 13500 N-m. What is the maximum shear stress in the shaft?
20.4 MPa
33
When is the approval date of R.A. 9292?
April 17, 2004
34
The command ‘Explode’ is used for _________________________
breaking a poly line into individual segments
35
The major pathways of exposure to toxic agents are: I. Inhalation, II. Ingestion, III. Whole body, IV. Skin absorption, V. eyes and hands
I, II, IV
36
The value [(1 + i)n - 1]/[i(1 + i)n] is known as _________.
uniform series present worth factor
37
Decisions for which the analyst elects to consider several possible futures, the probabilities of which cannot be estimated.
Decisions under uncertainty and risk
38
What factor should you use if you want to solve for the uniform series value given a future value?
Sinking Fund Factor
39
The angle between isometric axes is ________ degrees.
120
40
______ refers to other act of transmitting misleading or inaccurate information about the source of the phone call or text message, with the intent to defraud, cause harm or wrongfully obtain anything of value.
Spoofing
41
The Penal Provision of R. A. No. 9292 is provided in what section of the law?
Section 35
42
Why is carbon dioxide called a greenhouse gas?
Because they absorb heat
43
The strengthening process involving the formation of fine distribution of a second phase is called____
Precipitation hardening
44
The ethical responsibility of an engineer (ranked from highest to least important) is to:
(1) Society (2) Client (3) Profession (4) Yourself
45
The command which is used to create a round corner between two lines is __________
Fillet
46
Which of the following types of bonding is characterized by a strong attraction between a lattice of positive ions and a sea of delocalized electrons?
Metallic
47
In which process of water softening, the chemicals are added to remove hardness from water?
Lime soda process
48
The date of effectivity of the Implementing Rules and Regulations (PRC resolution 1032) of the CPD Act of 2016 (RA 10912)
March 15, 2017
49
Which of the following elements does not have a face-centered cubic structure?
Sodium
50
A high-end gaming laptop was purchased for P200,000 and has an expected life of 7 years. At the end of 7 years, the salvage value is estimated to be P9,200. According to straight line depreciation and sinking fund depreciation, what is the book value of the computer at the end of 4 years? Interest is 3% per year.
P 90,971.43; P 95,825.13