暗記メーカー

暗記メーカー

​
ログイン
Power Tools
28問 • 1年前
  • Fern Hiebert
    • 通報

    問題一覧

  • 1

    Guards on bench grinders should cover:

    2/3 of the wheel

  • 2

    The gap between the tool rest and the grindstone on a bench grinder should never be more than:

    3 mm (1/8")

  • 3

    A grinding wheel is classified by:

    the size and type of abrasive and the type of bonding agent.

  • 4

    A safety specification to consider when selecting a grinding stone or disc is:

    the rpm rating of the stone or disc

  • 5

    A dressing took is used for:

    rafacing the surface of grindstones

  • 6

    Bouncing or heavy vibration of the workpiece when grinding are indications that the grindstone is:

    out of round

  • 7

    Before installing a new grindstone, you need to:

    inspect the wheel for cracks

  • 8

    The flutes of a drill bit:

    all of the above

  • 9

    The web of a drill bit:

    all of the above

  • 10

    The rust of the drill bit grabbing the work or breaking:

    increases as the bit breaks through the work piece

  • 11

    A V-block should be used when drilling holes in:

    round material

  • 12

    Hand drills are rated by the:

    size of the chuck

  • 13

    Tapered shanks are most common on _________ drill bits.

    large

  • 14

    Slots in the drill press table are provided for:

    clamping jigs to the table

  • 15

    A magnetic base drill press is an advantage when:

    holes are drilled in the vertical plane

  • 16

    Forming steel plate into cylinders is a process known as:

    rolling

  • 17

    The main reason for using templates when forming steel is to:

    maintain accuracy

  • 18

    Before using a power brake, it is good practice to:

    confirm the machine settings

  • 19

    The power tool that is best suited for creating intricate shapes and multiple bends is the:

    power bender

  • 20

    Trip hammers are a good tool for:

    sharpening bucket teeth

  • 21

    What two factors must be considered when setting the blade clearance on a power shear ?

    material type and thickness

  • 22

    One advantage of a vertical saw is that it:

    can be used to cut curves

  • 23

    When cutting with a horizontal band saw, it is possible to:

    all of the above

  • 24

    A notcher is a cutting tool found on:

    an iron worker

  • 25

    Safe cutting of L shape structures in a cut-off saw requires:

    one vertical leg of the L shape against the stationary block of the clamping device

  • 26

    Power positioners range in size from small table top versions to large industrial versions.

    true

  • 27

    The shape, size of length of an object being welded on the positioner may require the use of what to help it rotate easily ?

    e) both a and c

  • 28

    What processes can a power position be used with ?

    e) all of the above

    • 100 official format practice questions.

    100 official format practice questions.

    Fern Hiebert · 100問 · 1年前

    100 official format practice questions.

    100 official format practice questions.

    100問 • 1年前
    Fern Hiebert

    SMAW Fillet Welds on Mild Steel

    SMAW Fillet Welds on Mild Steel

    Fern Hiebert · 25問 · 1年前

    SMAW Fillet Welds on Mild Steel

    SMAW Fillet Welds on Mild Steel

    25問 • 1年前
    Fern Hiebert

    SMAW and Oxyfuel Cutting on Mild Steel

    SMAW and Oxyfuel Cutting on Mild Steel

    Fern Hiebert · 23問 · 1年前

    SMAW and Oxyfuel Cutting on Mild Steel

    SMAW and Oxyfuel Cutting on Mild Steel

    23問 • 1年前
    Fern Hiebert

    SMAW Groove Welds on Mild Steel

    SMAW Groove Welds on Mild Steel

    Fern Hiebert · 20問 · 1年前

    SMAW Groove Welds on Mild Steel

    SMAW Groove Welds on Mild Steel

    20問 • 1年前
    Fern Hiebert

    GTAW Equipment Maintenance and troubleshooting

    GTAW Equipment Maintenance and troubleshooting

    Fern Hiebert · 31問 · 1年前

    GTAW Equipment Maintenance and troubleshooting

    GTAW Equipment Maintenance and troubleshooting

    31問 • 1年前
    Fern Hiebert

    GTAW Electrodes Filler Metals and Shielding Gases

    GTAW Electrodes Filler Metals and Shielding Gases

    Fern Hiebert · 28問 · 1年前

    GTAW Electrodes Filler Metals and Shielding Gases

    GTAW Electrodes Filler Metals and Shielding Gases

    28問 • 1年前
    Fern Hiebert

    Distortion

    Distortion

    Fern Hiebert · 23問 · 1年前

    Distortion

    Distortion

    23問 • 1年前
    Fern Hiebert

    Layout

    Layout

    Fern Hiebert · 9問 · 1年前

    Layout

    Layout

    9問 • 1年前
    Fern Hiebert

    Submerged Arc Welding (SAW)

    Submerged Arc Welding (SAW)

    Fern Hiebert · 20問 · 1年前

    Submerged Arc Welding (SAW)

    Submerged Arc Welding (SAW)

    20問 • 1年前
    Fern Hiebert

    GMAW on Mild Steel

    GMAW on Mild Steel

    Fern Hiebert · 19問 · 1年前

    GMAW on Mild Steel

    GMAW on Mild Steel

    19問 • 1年前
    Fern Hiebert

    FCAW and MCAW on Mild Steel

    FCAW and MCAW on Mild Steel

    Fern Hiebert · 13問 · 1年前

    FCAW and MCAW on Mild Steel

    FCAW and MCAW on Mild Steel

    13問 • 1年前
    Fern Hiebert

    The GTAW Process

    The GTAW Process

    Fern Hiebert · 29問 · 1年前

    The GTAW Process

    The GTAW Process

    29問 • 1年前
    Fern Hiebert

    2. 100 official format practice questions

    2. 100 official format practice questions

    Fern Hiebert · 62問 · 1年前

    2. 100 official format practice questions

    2. 100 official format practice questions

    62問 • 1年前
    Fern Hiebert

    GMAW FCAW & MCAW Groove Welds on Mild Steel

    GMAW FCAW & MCAW Groove Welds on Mild Steel

    Fern Hiebert · 8問 · 1年前

    GMAW FCAW & MCAW Groove Welds on Mild Steel

    GMAW FCAW & MCAW Groove Welds on Mild Steel

    8問 • 1年前
    Fern Hiebert

    Pattern Development

    Pattern Development

    Fern Hiebert · 15問 · 1年前

    Pattern Development

    Pattern Development

    15問 • 1年前
    Fern Hiebert

    Metallurgy for Practical Applications

    Metallurgy for Practical Applications

    Fern Hiebert · 16問 · 1年前

    Metallurgy for Practical Applications

    Metallurgy for Practical Applications

    16問 • 1年前
    Fern Hiebert

    Nickel Alloys and Clad Steels

    Nickel Alloys and Clad Steels

    Fern Hiebert · 9問 · 1年前

    Nickel Alloys and Clad Steels

    Nickel Alloys and Clad Steels

    9問 • 1年前
    Fern Hiebert

    Codes and Standards Part A & B

    Codes and Standards Part A & B

    Fern Hiebert · 31問 · 1年前

    Codes and Standards Part A & B

    Codes and Standards Part A & B

    31問 • 1年前
    Fern Hiebert

    Metal Identification

    Metal Identification

    Fern Hiebert · 32問 · 1年前

    Metal Identification

    Metal Identification

    32問 • 1年前
    Fern Hiebert

    問題一覧

  • 1

    Guards on bench grinders should cover:

    2/3 of the wheel

  • 2

    The gap between the tool rest and the grindstone on a bench grinder should never be more than:

    3 mm (1/8")

  • 3

    A grinding wheel is classified by:

    the size and type of abrasive and the type of bonding agent.

  • 4

    A safety specification to consider when selecting a grinding stone or disc is:

    the rpm rating of the stone or disc

  • 5

    A dressing took is used for:

    rafacing the surface of grindstones

  • 6

    Bouncing or heavy vibration of the workpiece when grinding are indications that the grindstone is:

    out of round

  • 7

    Before installing a new grindstone, you need to:

    inspect the wheel for cracks

  • 8

    The flutes of a drill bit:

    all of the above

  • 9

    The web of a drill bit:

    all of the above

  • 10

    The rust of the drill bit grabbing the work or breaking:

    increases as the bit breaks through the work piece

  • 11

    A V-block should be used when drilling holes in:

    round material

  • 12

    Hand drills are rated by the:

    size of the chuck

  • 13

    Tapered shanks are most common on _________ drill bits.

    large

  • 14

    Slots in the drill press table are provided for:

    clamping jigs to the table

  • 15

    A magnetic base drill press is an advantage when:

    holes are drilled in the vertical plane

  • 16

    Forming steel plate into cylinders is a process known as:

    rolling

  • 17

    The main reason for using templates when forming steel is to:

    maintain accuracy

  • 18

    Before using a power brake, it is good practice to:

    confirm the machine settings

  • 19

    The power tool that is best suited for creating intricate shapes and multiple bends is the:

    power bender

  • 20

    Trip hammers are a good tool for:

    sharpening bucket teeth

  • 21

    What two factors must be considered when setting the blade clearance on a power shear ?

    material type and thickness

  • 22

    One advantage of a vertical saw is that it:

    can be used to cut curves

  • 23

    When cutting with a horizontal band saw, it is possible to:

    all of the above

  • 24

    A notcher is a cutting tool found on:

    an iron worker

  • 25

    Safe cutting of L shape structures in a cut-off saw requires:

    one vertical leg of the L shape against the stationary block of the clamping device

  • 26

    Power positioners range in size from small table top versions to large industrial versions.

    true

  • 27

    The shape, size of length of an object being welded on the positioner may require the use of what to help it rotate easily ?

    e) both a and c

  • 28

    What processes can a power position be used with ?

    e) all of the above