drapting

20問 • 2年前

問題一覧

are used to join adjacent lengths of pipes and to provide changes of direction, and branch connections at any angle and to effect a change in size

fittings

a type of pipe fitting used in many high-pressure applications

threaded connections

used for 90-degree turn of piping in threaded piping systems

threaded 90 degree elbow

used for 45 degrees change in direction of piping

threaded 45 degree elbow

used to close the end of pipe

threaded cap

used for 90 degree branch connection of same or reducing size

threaded straight and reducing tee

is typically caused when the two parts being fastened together aren't properly aligned, so the holes don't match up

threaded cross

used to connect one piece of pipe to another in a straight direction

threaded full coupling

used for connecting small bore threaded branch to large bore welded pipe

threaded half coupling

are used as reducer in threaded piping networks

threaded reducing coupling

used to close one end of threaded fitting such as Tee or Elbow etc.

threaded hex plug

made from standard pipe pieces as per project requirement. used to connect two threaded fittings near to each other

both end threaded nipple

used to connect socket weld small bore piping to threaded small bore piping

POE TOE nipple

is to connect instrumentation tubes to air pipes. also used for analyzer tubing

threaded pipe to tube connector

used as reducers in threaded piping network by connecting smaller size pipe to bigger size female threaded fitting

threaded hexagon bushing

easy installation, removal, or replacement of lengths of pipe, valves, or vessels in screwed piping systems

threaded unions

are used to connect two female threaded fittings of different sizes to each other

threaded reducing insert

used to close one end of female threaded fitting for future expansion

square head plug

used to close vent and drain holes of valves, steam traps etc.

threaded round head plug

used to connect reduced size pipe to larger size female threaded fitting

threaded flush bushing

constellation

constellation

constellations

constellations

constellations

constellations

constellation

constellation

math

math

math 2

math 2

mupeh

mupeh

drafting × css

drafting × css

drafting

drafting

entrep

entrep

science

science

drafting

drafting

entrep

entrep

mapeh

mapeh

mapeh

mapeh

draf tung

draf tung

entrep

entrep

music

music

問題一覧

are used to join adjacent lengths of pipes and to provide changes of direction, and branch connections at any angle and to effect a change in size

fittings

a type of pipe fitting used in many high-pressure applications

threaded connections

used for 90-degree turn of piping in threaded piping systems

threaded 90 degree elbow

used for 45 degrees change in direction of piping

threaded 45 degree elbow

used to close the end of pipe

threaded cap

used for 90 degree branch connection of same or reducing size

threaded straight and reducing tee

is typically caused when the two parts being fastened together aren't properly aligned, so the holes don't match up

threaded cross

used to connect one piece of pipe to another in a straight direction

threaded full coupling

used for connecting small bore threaded branch to large bore welded pipe

threaded half coupling

are used as reducer in threaded piping networks

threaded reducing coupling

used to close one end of threaded fitting such as Tee or Elbow etc.

threaded hex plug

made from standard pipe pieces as per project requirement. used to connect two threaded fittings near to each other

both end threaded nipple

used to connect socket weld small bore piping to threaded small bore piping

POE TOE nipple

is to connect instrumentation tubes to air pipes. also used for analyzer tubing

threaded pipe to tube connector

used as reducers in threaded piping network by connecting smaller size pipe to bigger size female threaded fitting

threaded hexagon bushing

easy installation, removal, or replacement of lengths of pipe, valves, or vessels in screwed piping systems

threaded unions

are used to connect two female threaded fittings of different sizes to each other

threaded reducing insert

used to close one end of female threaded fitting for future expansion

square head plug

used to close vent and drain holes of valves, steam traps etc.

threaded round head plug

used to connect reduced size pipe to larger size female threaded fitting

threaded flush bushing