RENEW2024_1

100問 • 1年前

chia-chun Fang

通報

問題一覧

06-02A第19條規定，航空器有下何者為不合於適航安全條件：

以上皆是

About SDR items, which manual/section shall be referenced?

CAL GMM 3.2

According CAR 07-02A, article 147, the aircraft operator shall establish inspection system, and identify required inspection items(RII), which following is not correct?

inspection shall be performed in accordance with repair station capability list manual

According to 01-01A, article 110, The responsible person of a manufacturer or repair station, their employee or other hired person who undertakes the manufacture or maintenance with unapproved aviation products, appliances and parts, shall be subject to

Imprisonment not more than 3 years,detention, or in lieu of or addition to, a fine of up to NT$1,000,000

According to 07-02A, Article 150, how long shall the operator keep routine daily maintenance work records?

one year

According to 07-02A, article 152, maintenance personnel shall be given a rest period at how many consecutive hours during seven consecutive days?

24 hours

According to 07-02A, article 9, the operator shall establish what system from 2009.Jan.1, and report to CAA for approval?

safety management system

According to CAR 06-01A, article 21, to perform major repair/modification shall be in accordance with what kind of data?

CAA approved data

"According to CAR 06-01A, article 27, operator within how many hours shall report to OEM/authority any other failure, malfunction, or defect in an aircraft that occurs or is detected at any time if, in its opinion, that failure, malfunction, or defect has"

"According to CAR 06-01A, article 6, authorized certify staff shall fill out what kind of form after major repair/modification completed?"

CAA Form 337

"According to CI GMM, A Base Maintenance Release Certificate (BMRC) shall be issued by certifying staff with ?"

category C

"According to CI GMM, which maintenance task can be performed and signed-off by category M1/M2 ?"

light test

"According to Quality Procedure Numbering System, what does the code ""08"" in QP08M8052 mean for？"

Relevant Subject Code

"According to Quality Procedure Numbering System, what does the code ""52"" in QP08M8052 mean for？"

Quality Procedure Serial Number

AD EO完工後、應於Maintenix系統Task Detail的Action欄位及實體AD Job card的action taken欄位填寫為何?

per EO xxx-xx-xx-xxxx completed inspection (replace或modify等) ；per Job card xxxx-xx-xxxx completed inspection (replace或modify)

AD/EO/AMP工作單時，若發現數值落於相關範圍限制之外應如何處理?(QAB-19-003)

授權人員應確認應依據相關維護手冊執行缺點改正 (例如開立TLB, GLB或轉入TLB DD)

"After aircraft return service, the operator/repair station shall sign off CAA Form 337 and report to CAA through FSMIS for major repair/modification items?"

48 hours

"After complete A check or above maintenance check on aircraft, the certify staff to sign off Base Maintenance Release Certificate shall have which authorization?"

After completing defect rectification (especially for structure repair) , further controlling is necessary if the pursuant job cards or related manuals require further actions (like permanent repair)to be performed. Subject items shall be

Deferred into TLB-DD with condition and time limitation controlled.

After completion of items on the job card, authorization personnel should

All of the above

"After maintenance scheduled checks which form should be fillout as an evidence of airworthy for safe flight and can be checked by CAA?"

Certificate of release to service after maintenance

Aircraft daily schedule maintenance includes

all of the above

Aircraft maintenance check shall be recorded in?

in aircraft log book

Aircraft operator can consign CAA approved individual, group or repair station to perform maintenance on aircraft, and who is responsible for aircraft continue airworthiness?

aircraft operator

"Because of special circumstance when approved by the CAA, the weighing schedule may be extended but in no circumstance to exceed"

four years

CAA Form 337放置處，下列何者為誤

工作單位自存。

Can over due precision measuring equipment be borrowed for temporary use?

Over due precision measuring equipment of all units shall not be allowed use.

Certificate of release to service 的定義為何? (GMM 1.4/RSM1.3)

Confirms, on behalf of the certificated repair agencies, that the maintenance items listed have been carried out in conformity with CAA regulations and as stipulated in the GMM by personnel with appropriate authorizations.

"Except RII, some tasks can be designated the items that shall be inspected by inspectors. Such items are?"

SII(Supplementary Inspection Item)

Final Inspection 應應確認那些項目?

以上皆是

For CAL-EMO, which of following description is correct

AD must be RII.

For following items, which one is not B1 certify staff privilege?

Electrical power generation and distribution system tasks

For following items, which one is not M1 authorization?

perform operation/functional tests

"For Hong Kong register aircraft, which of following Operation Specification should be applied by CAL-EMO?"

HKAR-145 Approval

"For N-register aircraft, which of following Operation Specification should be applied by CAL-EMO?"

FAR-145 Approval

"For R.O.C. register aircraft, which of following Operation Specification should be applied by CAL-EMO?"

CAA 06-02A Approval

For special ferry flight permit procedure, which of the following is correct?

All of the above is correct.

"同一架飛機於連續 15 個航班，同 sub ATA 相同故障於維護記錄簿上登錄幾次（含）以上？定義為重複缺點。"

3 次

For the device which has been booking “MISSING” or “NOT IN USE, how to make it become serviceable again?

"The device which has been booking “MISSING” or “NOT IN USE” should be re- calibration before use."

For the following description about the RII, which one is not correct?

there is still have RII task on component maintenance.

"For the material/part brought out from warehouse, if damage founded or function abnormal, you shall fill out?"

SIT

"For the privileges of each kind of maintenance personnel(except specialized services personnel), you shall refer to which manual/section?"

GMM 6.2

"For the provision and requirements of test flight on CAL aircraft, you shall refer to which manual/section?"

GMM 9.1

For TLB-DD transfer, if it is M procedure item in MEL, what you should do ?

Note "M procedure completed" in Action Column" of TLB

"Form the following description about CAL GMM, which is correct?"

it has two volume(Volume I/Volume II)

"How can you know directly from your authorization owned by EMO ?"

TMS

"How does the manufacturer of an aircraft or engine keep the mechanics in the field aware of changes that affect the safety and performance of the aircraft or engines?"

Both of the above

"How many year is it required that aircraft must be weighed for basic weight and balance once ?"

three years

"If aircraft operator already have completed procedures, flight crew finished the training and grant approval from CAA, under no defect on aircraft and which condition, the aircraft airworthiness release can be exempted?"

diverted or technical landing at alternate airport, and no qualified certify staff at the alternate airport

"If cabin defect is listed in MEL item and it need to transfer to DD, to which log book you should transfer?"

TLB-DD

If the PME tool can not be calibrated by CAL-EMO, can it be sent to any institude which is willing to perform calibration for CAL-EMO?

The “TRACEABILITY” of subcontractor should meet the requirement of the aviation safety authorities (e.g. FAR-145).

In accordance 06-02A,repair station shall retain the maintenance records for how long?

two years at least

In accordance 07-02A, article 150, the operator shall retain the detailed maintenance records(ex: A/C check task card)and its maintenance release records for how long?

"shall retain the maintenance records until the time the work has been repeated or replaced by other work, minimum of one year."

"In accordance 07-02A, article 33, how long shall the operator keep fuel/engine oil usage record?"

three months

"In accordance with QCM section 5.1, when performing maintenance work on customer aircraft, RII items should be followed with"

Related RII procedure in customer GMM

"In accordance with RSM section 10.1, when China Airlines sub-contract component maintenance function to non-certified repair station, the certificate of release to service of the entire componenet should be signed by whom?"

Certifying staff of China Airlines

In R.O.C. Taiwan CAA regulation, for the airman penalty(fine) shall refer CAR 01-01A which article? And fine by?

Article 111, fine from NTD 60K to 300K.

In the following item, which is SDR item?

Both of the above

M1/M2 工作人員是否可獨自完成飛機系統測試工作

"須在合格授權人員督導之下完成並須在工單上共同簽署"

"Once completed maintenance on Engine/Component, the certify shall sign off ARC to return to service, the ARC is?"

Authorized Release Certificate

One of the primary differences between Category M1/M2 and Category B1.1/B2 is

Only Category "B1.1/B2" can do the first certification of RII items.

"Personal authorization application should be applied by ?"

Individual

Regarding B1.1/B2 privilege for CAT II/III, which of following is correct

Both of the above

"Routine maintenance means pre-/post- flight check, transit check, daily or overnight check, in addition to sign off on the task card for such check, maintenance staff should also make a entry on maintenance log(TLB)?"

Yes, it's necessary

"RSM, QCM and MMM are published in CAL-EMO intranet. If once internet is down, which unit can provide CD-ROM for use?"

"The certificate of airworthiness becomes invalid under which condition?"

all of the above

"The effective time period of airworthiness certificate of R.O.C registered aircraft is"

one year

"The first certification of RII should be what Category and above?"

B1.1/B2 Category

The range of mark N/A shall be made by drawing a line from upper right corner through lower left corner that involved TASK INSTRUCTION and SIGNOFF, and

Put stamp (or signature, ID) date and reason on the column which is marked with "N/A".

"The revision and revision date of each section in RSM is recorded in which section?"

1.2 List of Effective Pages

"The RII regulation and item list was stated in which section of General Maintenance Manual?"

GMM Section 8.6

"The round stamp with ""I-XXX"" authorization number will be issued for?"

Inspector B1.1 or B2 with I Category

The triangle stamp will be issued for?

Technicians who are authorized according to GMM 6.2

"The valid duration of authorization categories (M1~M5, specialized service, B1, B2, S3, S4, S5) is ?"

2 years

TLB 的 MEL 欄位中的”M”是指--

M Procedure

TLB 的 STATUS 欄位--

以上皆是

TLB 的CAT I-CAT III之到期日為

UTC時間

TLB-DD 登錄作業何者為非?

只要依據填寫規則，可隨時VOID該頁面，不需確認該缺點是否已被改正。

"TLB上有一項未改正的缺點，但DAILY CK 已完成，此時授權簽放人員可否簽證TLB之CRS欄位?"

"不可以，必須等缺點被改正或依據MEL轉入DD管制。"

"TLB上的一項結構缺點，執行完成修理工作後，如果所依據之工作單/ AMM / SRM 等，仍有後續檢查確認等規範時，"

"依據工作單或手冊轉入 TLB DD 並後續列管執行。"

"Under CAA authorization, for what category DD(Defer Defect),its correction interval can be extended one time?"

CAT. B/C

What do you need to do if the pilot reports "AUTOLAND FAILED"?

Follow FIM procedures for fault isolation and CAT downgrade to CAT I

What documents and data must be current and accessible when the relevant work is being done?

All of the above

What is main purpose of GMM6.2 qualification system?

For suitable mechanics with suitable knowledge to perform a job.

What is the purpose of AD(Airworthiness Directive) ?

To notify an unsafe condition of aircraft/ Engine/ component.

What is the topic of chapter 6 of GMM?

"Personnel Qualification and Training Requirements"

What is the topic of chapter 9 of GMM?

Maintenance

What is the topic of GMM 6.2?

Requirements for Maintenance Personnel

What is the topic of GMM 9.3?

Certificate of Release to Service for Aircraft and Aircraft Components after Maintenance

What should be done if authorization stamp is lost?

Report to department General Manager and inform M8 to make another stamp

What should be done if PME lab inform that a PME tool is found abnormal.

The PME should attach a copy of evaluation form of Working Standard Nonconformity to tool library or shop by Email . The tool library or shop shall check the borrowing record , notify unit chief and all users to complete all use case incurred affects an

"When a situation arises at an out-station where a possible duplicate inspection is necessary, an RII authorization on one- time basis is coordinated through"

Maintenance Operation Center (MOC) of Line Maintenance Department

When doing maintenance on Taiwan Tiger Air aircraft, which quality manual can not be the reference document?

China Airlines GMM

"When make a entry to maintenance log or task card, you shall not use?"

pencil

"When performing AD task cards, if discover the inspection area has already performed repair/alteration, and cause current status of inspection area is different from description in task cards, what should be done?"

AMOC (Alternate Method of Compliance) should be applied to CAA/FAA

"When performing maintenance for customer aircraft, which manual should be followed for the RII items and how to sign off maintenance log?"

customer manual

"When performing maintenance on CAL B-registered aircraft, to judge major/minor repair/modification shall be in accordance with which document?"

GMM 8.5 (07-02A)

"When suspect unapproved parts is discovered, which chapter of GMM should be followed to report to Quality Assurance Division."

GMM 10.4, SUP

"When there is no existing maintenance document available to solve the problem, maintenance personnel should"

"Fill out Technical Assistance Requisition form"

100

"Where can you get the description of difference between ""M"" and ""S"" category authorization?"

GMM 6.2

RENEW

chia-chun Fang · 46問 · 2年前

RENEW

46問 • 2年前

chia-chun Fang

RENEW2024_2

chia-chun Fang · 100問 · 1年前

RENEW2024_2

100問 • 1年前

chia-chun Fang

RENEW2024_3

chia-chun Fang · 100問 · 1年前

RENEW2024_3

100問 • 1年前

chia-chun Fang

RENEW2024_4

chia-chun Fang · 100問 · 1年前

RENEW2024_4

100問 • 1年前

chia-chun Fang

RENEW2024_5

chia-chun Fang · 89問 · 1年前

RENEW2024_5

89問 • 1年前

chia-chun Fang

RENEW2024_6

chia-chun Fang · 12問 · 1年前

RENEW2024_6

12問 • 1年前

chia-chun Fang

問題一覧

06-02A第19條規定，航空器有下何者為不合於適航安全條件：

以上皆是

About SDR items, which manual/section shall be referenced?

CAL GMM 3.2

According CAR 07-02A, article 147, the aircraft operator shall establish inspection system, and identify required inspection items(RII), which following is not correct?

inspection shall be performed in accordance with repair station capability list manual

Imprisonment not more than 3 years,detention, or in lieu of or addition to, a fine of up to NT$1,000,000

According to 07-02A, Article 150, how long shall the operator keep routine daily maintenance work records?

one year

According to 07-02A, article 152, maintenance personnel shall be given a rest period at how many consecutive hours during seven consecutive days?

24 hours

According to 07-02A, article 9, the operator shall establish what system from 2009.Jan.1, and report to CAA for approval?

safety management system

According to CAR 06-01A, article 21, to perform major repair/modification shall be in accordance with what kind of data?

CAA approved data

"According to CAR 06-01A, article 6, authorized certify staff shall fill out what kind of form after major repair/modification completed?"

CAA Form 337

"According to CI GMM, A Base Maintenance Release Certificate (BMRC) shall be issued by certifying staff with ?"

category C

"According to CI GMM, which maintenance task can be performed and signed-off by category M1/M2 ?"

light test

"According to Quality Procedure Numbering System, what does the code ""08"" in QP08M8052 mean for？"

Relevant Subject Code

"According to Quality Procedure Numbering System, what does the code ""52"" in QP08M8052 mean for？"

Quality Procedure Serial Number

AD EO完工後、應於Maintenix系統Task Detail的Action欄位及實體AD Job card的action taken欄位填寫為何?

per EO xxx-xx-xx-xxxx completed inspection (replace或modify等) ；per Job card xxxx-xx-xxxx completed inspection (replace或modify)

AD/EO/AMP工作單時，若發現數值落於相關範圍限制之外應如何處理?(QAB-19-003)

授權人員應確認應依據相關維護手冊執行缺點改正 (例如開立TLB, GLB或轉入TLB DD)

"After aircraft return service, the operator/repair station shall sign off CAA Form 337 and report to CAA through FSMIS for major repair/modification items?"

48 hours

"After complete A check or above maintenance check on aircraft, the certify staff to sign off Base Maintenance Release Certificate shall have which authorization?"

Deferred into TLB-DD with condition and time limitation controlled.

After completion of items on the job card, authorization personnel should

All of the above

"After maintenance scheduled checks which form should be fillout as an evidence of airworthy for safe flight and can be checked by CAA?"

Certificate of release to service after maintenance

Aircraft daily schedule maintenance includes

all of the above

Aircraft maintenance check shall be recorded in?

in aircraft log book

Aircraft operator can consign CAA approved individual, group or repair station to perform maintenance on aircraft, and who is responsible for aircraft continue airworthiness?

aircraft operator

"Because of special circumstance when approved by the CAA, the weighing schedule may be extended but in no circumstance to exceed"

four years

CAA Form 337放置處，下列何者為誤

工作單位自存。

Can over due precision measuring equipment be borrowed for temporary use?

Over due precision measuring equipment of all units shall not be allowed use.

Certificate of release to service 的定義為何? (GMM 1.4/RSM1.3)

"Except RII, some tasks can be designated the items that shall be inspected by inspectors. Such items are?"

SII(Supplementary Inspection Item)

Final Inspection 應應確認那些項目?

以上皆是

For CAL-EMO, which of following description is correct

AD must be RII.

For following items, which one is not B1 certify staff privilege?

Electrical power generation and distribution system tasks

For following items, which one is not M1 authorization?

perform operation/functional tests

"For Hong Kong register aircraft, which of following Operation Specification should be applied by CAL-EMO?"

HKAR-145 Approval

"For N-register aircraft, which of following Operation Specification should be applied by CAL-EMO?"

FAR-145 Approval

"For R.O.C. register aircraft, which of following Operation Specification should be applied by CAL-EMO?"

CAA 06-02A Approval

For special ferry flight permit procedure, which of the following is correct?

All of the above is correct.

"同一架飛機於連續 15 個航班，同 sub ATA 相同故障於維護記錄簿上登錄幾次（含）以上？定義為重複缺點。"

3 次

For the device which has been booking “MISSING” or “NOT IN USE, how to make it become serviceable again?

"The device which has been booking “MISSING” or “NOT IN USE” should be re- calibration before use."

For the following description about the RII, which one is not correct?

there is still have RII task on component maintenance.

"For the material/part brought out from warehouse, if damage founded or function abnormal, you shall fill out?"

SIT

"For the privileges of each kind of maintenance personnel(except specialized services personnel), you shall refer to which manual/section?"

GMM 6.2

"For the provision and requirements of test flight on CAL aircraft, you shall refer to which manual/section?"

GMM 9.1

For TLB-DD transfer, if it is M procedure item in MEL, what you should do ?

Note "M procedure completed" in Action Column" of TLB

"Form the following description about CAL GMM, which is correct?"

it has two volume(Volume I/Volume II)

"How can you know directly from your authorization owned by EMO ?"

TMS

"How does the manufacturer of an aircraft or engine keep the mechanics in the field aware of changes that affect the safety and performance of the aircraft or engines?"

Both of the above

"How many year is it required that aircraft must be weighed for basic weight and balance once ?"

three years

diverted or technical landing at alternate airport, and no qualified certify staff at the alternate airport

"If cabin defect is listed in MEL item and it need to transfer to DD, to which log book you should transfer?"

TLB-DD

If the PME tool can not be calibrated by CAL-EMO, can it be sent to any institude which is willing to perform calibration for CAL-EMO?

The “TRACEABILITY” of subcontractor should meet the requirement of the aviation safety authorities (e.g. FAR-145).

In accordance 06-02A,repair station shall retain the maintenance records for how long?

two years at least

In accordance 07-02A, article 150, the operator shall retain the detailed maintenance records(ex: A/C check task card)and its maintenance release records for how long?

"shall retain the maintenance records until the time the work has been repeated or replaced by other work, minimum of one year."

"In accordance 07-02A, article 33, how long shall the operator keep fuel/engine oil usage record?"

three months

"In accordance with QCM section 5.1, when performing maintenance work on customer aircraft, RII items should be followed with"

Related RII procedure in customer GMM

Certifying staff of China Airlines

In R.O.C. Taiwan CAA regulation, for the airman penalty(fine) shall refer CAR 01-01A which article? And fine by?

Article 111, fine from NTD 60K to 300K.

In the following item, which is SDR item?

Both of the above

M1/M2 工作人員是否可獨自完成飛機系統測試工作

"須在合格授權人員督導之下完成並須在工單上共同簽署"

"Once completed maintenance on Engine/Component, the certify shall sign off ARC to return to service, the ARC is?"

Authorized Release Certificate

One of the primary differences between Category M1/M2 and Category B1.1/B2 is

Only Category "B1.1/B2" can do the first certification of RII items.

"Personal authorization application should be applied by ?"

Individual

Regarding B1.1/B2 privilege for CAT II/III, which of following is correct

Both of the above

Yes, it's necessary

"RSM, QCM and MMM are published in CAL-EMO intranet. If once internet is down, which unit can provide CD-ROM for use?"

"The certificate of airworthiness becomes invalid under which condition?"

all of the above

"The effective time period of airworthiness certificate of R.O.C registered aircraft is"

one year

"The first certification of RII should be what Category and above?"

B1.1/B2 Category

The range of mark N/A shall be made by drawing a line from upper right corner through lower left corner that involved TASK INSTRUCTION and SIGNOFF, and

Put stamp (or signature, ID) date and reason on the column which is marked with "N/A".

"The revision and revision date of each section in RSM is recorded in which section?"

1.2 List of Effective Pages

"The RII regulation and item list was stated in which section of General Maintenance Manual?"

GMM Section 8.6

"The round stamp with ""I-XXX"" authorization number will be issued for?"

Inspector B1.1 or B2 with I Category

The triangle stamp will be issued for?

Technicians who are authorized according to GMM 6.2

"The valid duration of authorization categories (M1~M5, specialized service, B1, B2, S3, S4, S5) is ?"

2 years

TLB 的 MEL 欄位中的”M”是指--

M Procedure

TLB 的 STATUS 欄位--

以上皆是

TLB 的CAT I-CAT III之到期日為

UTC時間

TLB-DD 登錄作業何者為非?

只要依據填寫規則，可隨時VOID該頁面，不需確認該缺點是否已被改正。

"TLB上有一項未改正的缺點，但DAILY CK 已完成，此時授權簽放人員可否簽證TLB之CRS欄位?"

"不可以，必須等缺點被改正或依據MEL轉入DD管制。"

"TLB上的一項結構缺點，執行完成修理工作後，如果所依據之工作單/ AMM / SRM 等，仍有後續檢查確認等規範時，"

"依據工作單或手冊轉入 TLB DD 並後續列管執行。"

"Under CAA authorization, for what category DD(Defer Defect),its correction interval can be extended one time?"

CAT. B/C

What do you need to do if the pilot reports "AUTOLAND FAILED"?

Follow FIM procedures for fault isolation and CAT downgrade to CAT I

What documents and data must be current and accessible when the relevant work is being done?

All of the above

What is main purpose of GMM6.2 qualification system?

For suitable mechanics with suitable knowledge to perform a job.

What is the purpose of AD(Airworthiness Directive) ?

To notify an unsafe condition of aircraft/ Engine/ component.

What is the topic of chapter 6 of GMM?

"Personnel Qualification and Training Requirements"

What is the topic of chapter 9 of GMM?

Maintenance

What is the topic of GMM 6.2?

Requirements for Maintenance Personnel

What is the topic of GMM 9.3?

Certificate of Release to Service for Aircraft and Aircraft Components after Maintenance

What should be done if authorization stamp is lost?

Report to department General Manager and inform M8 to make another stamp

What should be done if PME lab inform that a PME tool is found abnormal.

"When a situation arises at an out-station where a possible duplicate inspection is necessary, an RII authorization on one- time basis is coordinated through"

Maintenance Operation Center (MOC) of Line Maintenance Department

When doing maintenance on Taiwan Tiger Air aircraft, which quality manual can not be the reference document?

China Airlines GMM

"When make a entry to maintenance log or task card, you shall not use?"

pencil

AMOC (Alternate Method of Compliance) should be applied to CAA/FAA

"When performing maintenance for customer aircraft, which manual should be followed for the RII items and how to sign off maintenance log?"

customer manual

"When performing maintenance on CAL B-registered aircraft, to judge major/minor repair/modification shall be in accordance with which document?"

GMM 8.5 (07-02A)

"When suspect unapproved parts is discovered, which chapter of GMM should be followed to report to Quality Assurance Division."

GMM 10.4, SUP

"When there is no existing maintenance document available to solve the problem, maintenance personnel should"

"Fill out Technical Assistance Requisition form"

100

"Where can you get the description of difference between ""M"" and ""S"" category authorization?"

GMM 6.2