Discussion -2 Six Sigma

31 questions • 2024-03-01
Jef Marc Valencia
Report

Question

Anything that does not meet customer requirements

Answer

Question

The Goal of Six Sigma

Answer

Question

Phases of Six Sigma

Answer

Question

Phase in Six Sigma where it validate the problem, describes the QI and issues starting with a project charter

Answer

Question

Phase in Six Sigma where it collects data to measure the process and establish a baseline.

Answer

Question

Phase in Six Sigma where it verify the rootcauses

Answer

Question

phase in Six Sigma where it pilot process changes and evaluates and fine-tunes the new process

Answer

Question

phase in Six Sigma where it maintains process gains.

Answer

Question

It calculates the difference between QC results and target means

Answer

Question

CUMULATIVE SUM CHART Common method

Answer

Discussion -2 Six Sigma

TestMaker

Score

0 / 10

Correct rate

0%

Correct: 0

Incorrect: 0

Unanswered: 10

 
ankimaker.com

Question list

  • 1

    Anything that does not meet customer requirements

    DEFECT

  • 2

    The Goal of Six Sigma

    3.4 DPMO, 99.9997% YIELD

  • 3

    Phases of Six Sigma

    DEFINE, MEASURE, ANALYZE, IMPROVE, CONTROL

  • 4

    Phase in Six Sigma where it validate the problem, describes the QI and issues starting with a project charter

    DEFINE

  • 5

    Phase in Six Sigma where it collects data to measure the process and establish a baseline.

    MEASURE

  • 6

    Phase in Six Sigma where it verify the rootcauses

    ANALYZE

  • 7

    phase in Six Sigma where it pilot process changes and evaluates and fine-tunes the new process

    IMPROVE

  • 8

    phase in Six Sigma where it maintains process gains.

    CONTROL

  • 9

    It calculates the difference between QC results and target means

    CUMULATIVE SUM CHART

  • 10

    CUMULATIVE SUM CHART Common method

    V-MASK

  • 11

    It identifies consistent bias problems; it requires computer implementation and the plot will give the earliest indication of systemicerrors ( trend) and can be used with the 13 S rule

    CUMULATIVE SUM CHART

  • 12

    Found in clin. Laboratories w/ microcomputer Q.C. programs

    DECISION LIMIT CUSUM

  • 13

    Very sensitive to SE but does NOT provide very good detection of RE

    DECISION LIMIT CUSUM

  • 14

    The results are out of control when the slope exceeds 45 degree or a decision ( +/-2.7 SD ) is excéeded

    DECISION LIMIT CUSUM

  • 15

    CUSUM value is compared w/ a

    NUMERICAL LIMIT

  • 16

    QC Chart used to compare results obtained on a high and low conrol serum from different laboratories

    YOUDEN PLOT, SCATTER DIAGRAM

  • 17

    Presents information in an efficient, graphical format and accomplished with a simple listing of items

    CHECK SHEET

  • 18

    Its use may be enhanced by incorporating a depiction of the system under analysis into the form

    CHECK SHEET

  • 19

    Used to identify factors that have the greatest cumulative effect on the system which allows the user to focus attention on a few important factors in a process

    PARETO CHART

  • 20

    Used in Cumulative frequencies of the relative frequency data are plotted in descending order

    PARETO CHART

  • 21

    Used to associate multiple possible causes with a single effect

    CAUSE AND EFFECT DIAGRAM

  • 22

    represents the effect (quality characteristic that is intended to be improved & controlled)

    PRIMARY BRANCH

  • 23

    Branch corresponds to major causes that directly relates to the effect

    MAJOR BRANCH

  • 24

    Branch for more detailed causal factors

    MINOR BRANCH

  • 25

    Pictorial representations of a process where it used in identifying where errors are likely to be found in the system

    FLOW CHART

  • 26

    Provides a simple, graphical view of accumulated data, including its dispersion & central tendency allowing ease of construction

    HISTOGRAM

  • 27

    Provide the easiest way to evaluate the distribution of data

    HISTOGRAM

  • 28

    MAIN GOAL of Six Sigma

    TO REDUCE NUMBER OF DEFECT TO NEAR ZERO

  • 29

    Seeks to identify, measure, and eliminate the large gaps of inefficiency in a process

    SIX SIGMA

  • 30

    Six Sigma Hands-on process with the single mantra of

    IMPROVEMENT

  • 31

    DPMO means

    DEFECT PER MILLION OPPORTUNITY