What is the first metal used by man

What is the meaning of HTTP

Thermodynamics comes from the word

How many bytes are there in 1 kilobyte?

Which of the following is the unit of strain?

What do you call an adiabatic process with no work done?

What is the most common language used in web designing?

What do you call a process of converting gas to solid?

Which of the following impurities in cast-iron that makes it hard and brittle?

The property of material by virtue by which it can be beaten or rated into plates. (thin sheets)

It is the ability of material which allows it to be drawn in smaller section. (thin wire)

The color of the star depends on ___.

What is the shortcut key to reach the end of document.

What device is used to measure fluid velocity as well as the velocity of fluid inside the pipe?

What is the minimum age for the person to become a member of the board of EE?

Which of the following not used in programming application?

what is defined as an alloy of iron and carbon, with the carbon being restricted within certain concentration limits?

what type of steel has carbon as its principal hardening agent

what type of steel has 0.8% of carbon and 100% pearlite

galvanized steel are steel products coated with

the use of acids to remove oxides and scale on hot worked steel is known as

what do you call tin mill steel without a coating

what combination of elements has high electrical resistance high corrosion resistance and high strength at red heat temperature making it useful in resistance heating

a steel cannot qualify for stainless prefix until it has at least how many percent of chromium

what do you add to compensate for the remaining high iron oxide content of the steel

which of the following cast iron is high carbon, iron-carbon-silicon alloy

which of the following cast irons is a heat treated for ductility

what is considered as the general purpose oldest type and widely used cast iron

which cast iron is hard and wear resistant

what is the advantage of quench hardening

what is the lowest temperature diffusion hardening process and does not require a quench

which of the following is a requirement for hardening a steel

what field of study encompasses the procurement and production of metals

what do you call earth and stone mixed with the iron oxides

what is a coal that has been previously burn in an oxygen poor environment

what is the most common alloying ingredient in copper

what refers to the case hardening process by which the carbon content of the steel near the surface of a part is increased

what is the most undesirable of all the elements commonly found in steels

what impurity in steel can cause red shortness which means the steel becomes unworkable in high temperature

what is the process of producing a hard surface and a steel having sufficiently high carbon content to respond to hardening by rapid cooling of a surface

what is the most common reinforcement for polymer composites

in electrochemistry, oxidation is a loss of

what is the process of putting back the lost electrons to convert the ion back to metal

what do you call a fluid that conducts electricity

what is defined as a local corrosion damage characterized by surface cavities

what do you call the removal of zinc from brasses

what is the scaling off a surface inflicts or layers as the result of corrosion

what refers to a shape achieved by allowing a liquid to solidify in a mold

what cast iron has a nodular of spheroidal graphite

what is a process for making glass reinforce shapes that can be generated by pulling resin impregnated glass strands through a die

what is a natural substance that makes up a significant portion of all plant life

what term is used to denote a family of thermosetting polymers that are reaction products of alcohols and acids

what refers to the application of any process whereby the surface of steel is altered so that it will become hard

what is the chief ore of tin

what is the chief ore of zinc

what is the mixture of gibbsite and diaspore of which aluminum is derived

the term bronze is used to designate any alloy containing

the term brass is used to designate an alloy containing

what is the most abundant metal in nature

What steel relief process is used with hypoeutectoid steels to change martenite into pearlite?

the portland cement is manufactured from the following elements except

what is another term for tempering

all are steel surface hardening processes except

the pressure which a substance is capable of supporting without fracturing

the dimensionless parameter describing deformation

the general law of mechanics that stress is directly proportional to strain

Which plant takes the least time in starting from cold conditions to full load operations

April 2023: A company is making an effort to improve its project performance and create historical records of past projects. What is the BEST way to accomplish this?

the need for ____ is one of the major driving forces for communication in a project.

April 2023: which of the following is CORRECT?

effective project integration usually requires an emphasis on

when it comes to changes, the project manager's attention is BEST given to

April 2023: all of the following are characteristics of a project except

Labor Code of the Philippines Rule _______ : Personal Protective Equipment and Devices

It is an unexpected or unplanned event which may or may not result in injury or damage or property loss or death.

It is an event which represents deviation from the intended sequence of designed steps.

In probability of the realization of potential for loss or damage or injury.

Inherent property of a substance or an occurrence which has potential to cause loss or damage property, person or environment.

April 2022: What color is used to designate caution, limited to warning against starting, use of, or movement of equipment which is under repair or being worked upon?

Sept 2022: As of OSHS standard color of signs, what color is used for alert to designate dangerous parts of machines or energized equipment which may cut, crush, shock or otherwise injure.

_____ shall be provided where the processes or operations present hazards of flying objects, liquids, injurious radiation, glare or a combination of these hazards.

When selecting _______, consideration should be given to the hazards to which the wearer may be exposed to and the ease and free movement of the fingers.

Sept 2022: Protection of workers from impact penetration from falling and flying objects, blows, and from limited electric shock and burns shall be provided where there is reasonable probability of exposure to such hazards.

Sept 2021: What is the standard color for safety signages to indicate the presence of radiation hazards example in the X-ray laboratory in the hospital?

Sept 2022: Color used for traffic and good housekeeping signage?

Sept 2021: This provides detailed information about a specific hazardous material and contains some of the following such name of substance, physical hazards, health hazards, safe handling procedures, control measures, emergency first aid-procedures, etc. What is this called?

April 2023: Which of the following is not a hazardous practice?

Yellow and black sign means:

in @abcgmail.com what is abc

an abbreviation that represents the op code of a computer instruction

pentium is related with which part of a computer

who invented the world wide web

any organization's initial web page is known as

part of computer which is responsible for executing programs doing arithmetic and exercising general control

the process of moving from one website to another website is known as

which of the following is not one of the four major data processing functions of a computer

the term bus refers to

the digital circuit is also referred to a/an ____ circuit

what is the term used to describe the moving of data from one another to your computer

"MAN" stands for