1:100

80問 • 2年前

عبدالله مدني

通報

問題一覧

Which of the following is NOT a part of the safety at work process

deleting elements

What is the purpose of the safety at work circle

All of the above

Which of the following is the step in the safety at work process

Risk Assessment

What is the purpose of risk assessment

All of the above

Which of the following is an example of a hazard control

All of the above

Which of the following is the highest level in the hierarchy of controls

Elimination

Which of the following is an example of an engineering control

Installing a guard on a machine to prevent workers from getting injured

Which of the following is an example of an administrative control

Training workers on safe work procedures

Which of the following is the least effective level in the hierarchy of controls

Personal protective equipment (PPE)

What is the main purpose of a work permit system

All of the above.

When is a work permit required

All of the above.

Who is typically responsible for issuing and approving work permits

The permit issuer.

What are the essential steps in a work permit system

All of the above.

What is the purpose of a work permit checklist

All of the above.

A work permit is required for work in which of the following conditions

All of the above

A work permit is also required for which of the following activities

All of the above

A work permit is required for the introduction of ignited sources where not permanently allowed. This includes which of the following activities

All of the above

A work permit is required when performing manual or powered excavations, regardless of the depth.

False

A work permit is required for the use of mobile cranes, regardless of the lifting capacity and the specific location of the operation

False

A work permit is required for handling insulation or catalysts, regardless of the amount or the potential hazard posed by these materials

False

A work permit is required for the use of adapters in situations where they are used to connect incompatible equipment or piping systems

True

A work permit is required for product conversions of stationary or mobile or portable vessels and containers, regardless of the type of product involved and the potential hazards associated with the conversion

False

A work permit is required for temporary or permanent changes, alterations, or modifications to equipment or processes, even if the changes are considered minor or do not introduce new hazards

True

A work permit is required for work activities where there is exposure to traffic, regardless of the proximity to traffic lanes or the potential for accidents

False

A work permit is required for activities where there is exposure to moving/rotating machinery, regardless of the type of machinery, its size, or the potential for injury

True

A work permit is required for work activities conducted in proximity of vents, liquids, or gases, regardless of the nature of the substances involved and the potential for explosions or leaks

True

A work permit is required for work activities performed on process lines where there is a risk of gas release, regardless of the type of gas, its quantity, or the potential for explosions or fires

True

The Work Permit System is implemented to ensure that work is conducted safely

True

The Work Permit System ensures that all work activities are authorized and properly planned before execution

True

The Work Permit System helps to identify, assess, and mitigate potential hazards associated with specific work activities

True

The Work Permit System requires that all work activities are coordinated with relevant stakeholders, such as production personnel, customers, and suppliers

True

The Work Permit System ensures that the work area is properly secured and isolated before work commences

True

The Work Permit System facilitates the handover of the work area back to production once the work is completed and safety checks are conducted

True

The Work Permit System is crucial for minimizing the risk of occupational accidents and ensuring a safe working environment

True

Who is responsible for collecting and organizing information to uncover the true causes of an accident

The investigator

What is the main objective of an accident investigation

To prevent a recurrence of the accident

What are the three main steps in an accident investigation

Instant response, securing the site, and conducting an investigation

What are some of the things that an investigator should do immediately upon making a decision to open an investigation

Activate the emergency and contact group, notify all departments to secure the site, and inform the site to maintain the site as it is

What is the purpose of the Work Permit System

To ensure that all work activities are authorized and properly planned before execution

Why is it important to review flowsheets, drawings, and specifications before work begins

To ensure that all key personnel involved in the job have a thorough understanding of the work

What specific information should be reviewed from the flowsheets, drawings, and specifications

Pressure, temperature, valve identification, equipment specification, operating and maintenance instructions, materials of construction and compatibilities

How does reviewing flowsheets, drawings, and specifications help ensure safety during work activities

By providing a clear understanding of the work to be done, it can help to identify potential hazards and risks

What are some of the consequences of failing to review flowsheets, drawings, and specifications before work begins

Accidents can occur due to the misidentification of hazards or the failure to take appropriate safety precautions

Why is it important for personnel involved in the Work Permit System to visit the worksite prior to work commencement

To familiarize themselves with the work area and identify potential hazards

What specific aspects of the worksite should be inspected during a pre-worksite visit

Neighbouring activities, site rules, ove

What types of potential hazards should be identified during a worksite inspection

Flammable, oxygen-deficient, toxic substances, confined spaces, electrical hazards, pressure, temperature, moving objects, traffic hazards, falls, trips, and slips

What are the consequences of failing to conduct a thorough worksite inspection before work commences

Potential accidents caused by unidentified hazards and inadequate safety precautions

What type of energy source is shown in the image

Electrical

What is the purpose of the lock-out/tag-out device shown in the image

All of the above

Who is responsible for locking out and tagging out an electrical panel

Both of the above

What are the consequences of failing to lock out and tag out an electrical panel before performing work

All of the above

The image shows an electrical panel with a single circuit breaker. How many lockout/tag-out devices are required to lock out and tag out this electrical panel

One

What type of energy source is shown in the image

Electrical

Is the electrical panel shown in the image locked out and tagged out

Yes

What is the purpose of the lock-out/tag-out device shown in the image

All of the above

Who is responsible for ensuring that the lock-out/tag-out device remains in place until all work on the electrical panel is complete

Both of the above

What are the consequences of removing a lock-out/tag-out device while work is still in progress

All of the above

Based on the image, what type of lock-out/tag-out device is being used

Circuit breaker lock

What type of energy source is shown in the image

Electrical

Is the electrical panel shown in the image locked out and tagged out

Yes

What information is required on the handwritten tag shown in the image

All of the above

Who is responsible for ensuring that the lock-out/tag-out device remains in place until all work on the electrical panel is complete

Both of the above

What are the consequences of removing a lock-out/tag-out device while work is still in progress

All of the above

Based on the information on the handwritten tag, what is the reason for locking out and tagging out the electrical panel

Repairing a broken wire

Why is it important to have legislation for workplace safety

All of the above

Who is responsible for enforcing health and safety legislation in the workplace

Both the HSE and local government

What are the consequences of a business failing to comply with health and safety legislation

Both fines and imprisonment

What can employees do to play an active role in promoting safety in the workplace

All of the above

In addition to legal obligations, what should employers and employees also do to ensure a safe workplace

All of the above

What is the overarching goal of the Health and Safety at Work Act 1974 (HASWA)

To provide a mechanism for updating safety legislation as needed

How does HASWA categorize the responsibilities for workplace safety

Both employers and employees share responsibility for maintaining a safe working environment

What is the significance of HASWA being considered an "umbrella act"

It allows for the incorporation of future safety legislation

Why is HASWA referred to as an "enabling act"

It paves the way for introducing new safety regulations and amendments

What are the implications of assigning safety responsibilities to both employers and employees

It empowers employees to take ownership of their safety and contribute to a safer work environment

According to HASWA, what is the responsibility of employees regarding the implementation of safety policies

Employees must actively cooperate with safety policies and take all reasonable steps to comply with them

What is the responsibility of employees regarding the safe use of equipment

Employees must use equipment in accordance with the manufacturer's instructions and the employer's safety procedures

What is the responsibility of employees regarding the wearing of provided protective clothing (PPE)

Employees must wear PPE whenever it is required for their safety, regardless of whether they have been specifically instructed to do so

What is the responsibility of employees regarding attendance at safety training sessions

Employees must attend all safety training sessions that are mandatory for their job role

What is the responsibility of employees regarding the reporting of potential or actual hazards

Employees must report any potential or actual hazards they observe, regardless of how minor they may seem

Who does the Health and Safety (Display Screen Equipment) Regulations 1992 apply to

Employees who use VDUs as part of their normal work