問題一覧
1
What is made by bonding together thin layers of wood in a way that the grain of each layer is at right angles to the grain of each adjacent layer?
Plywood
2
What is the main masonry component in the Philippines that is made of lightweight and heavyweight materials for interior and exterior wall and partitions?
CHB
3
What is the term used for each layer of the plywood?
Veneer
4
What is casting of concrete in a reusable mold or "form cured" in a controlled environment, transported to the construction site and lifted into place?
Pre-cast Concrete
5
What is a subject to pure tension under the action of external loads?
Tensile Structures
6
What is considered as the skeletal system of the human body?
Structural System
7
What is composed of straight members connected at their ends by hinged connections to form a stable configuration?
Trusses
8
True or False: Plain Concrete is a stone as a result of mixing cement, fine aggregates, and coarse aggregates.
False
9
Slabs, piers and other heavy mass construction has an allowable deflection of?
50mm
10
What lumber is used in heavy construction for load-bearing purposes?
Structural Lumber
11
What is the masonry unit that architectural in element that provides visual obscuration while admitting light?
Glass Block
12
What is the type of cement that is siliceous and aluminous material which has volcanic origin?
Pozzolanic Cement
13
What is termed as the fashion accessories in buildings?
Finishes
14
Reinforced Concrete is a Concrete with reinforcement properly embedded in such manner that the two materials act together in resisting forces.
True
15
How is concrete tested in strength?
Cylinder Test
16
True or False: Weight method is measuring concrete mixtures through molecular components and standards.
False
17
In reporting, what is considered a grand stair?
Bifurcated
18
What is not a basic structural system?
Keystone
19
What is the type of aggregate that passes through a 5 mm sleve?
Fine
20
What is a rough field stone usually used for filling materials?
Pebble
21
True or False: In the reporting, finishing trims are provided to hide imperfection in the workmanship.
True
22
What is a building stone igneous rock, very hard, durable and has a high gloss polish used in flooring wall paneling and counter top?
Granite
23
What is the regularly shaped and roughly dressed stones?
Rubble
24
What is the most common and convenient way using empty cement bags or measuring box for sand and gravel in molding concrete?
Volume Method
25
What is intended for use in shops or meals making sash doors and cabinets?
Shop Lumber
26
True or False: Concrete are not waterproof.
True
27
True or False: Masonry is the building of structures from individual units laid and bound together by concrete.
False
28
What is considered as the minimum ceiling height of room with natural ventilation?
2.70m
29
True or False: Bending bars should be along the main nb.
True
30
What is the best way to but joint lumbers in an engineered wood lumber?
Finger Joint
31
True or False: Green lumber is the best to use since it dries out and shrinks if allowed to stand too long before the concrete is placed.
False
32
What is the masonry unit that is manufactured by clay or cement widely used for ventilation?
Decorative Block
33
What are materials in the form of powder or fluids that are added to the concrete to give it certain characteristics not obtainable with plain concrete mixes?
Chemical Admixtures
34
During form works, use nails abundantly in the construction of forms to ensure stability and adds the labor of working but also renders the lumber until for continued use
False
35
What is used as a protective and decorative covering for interior and exterior walls and surfaces in masonry units?
Stone Veneer
36
The strongest lumber is that made of heartwood of the log.
True
37
It's term used to build up several layers of wood whose grains direction are all substantially parallel and held together with glue as lastening.
Laminated Lumber
38
What is used to finish the face of the concrete hollow block?
Conc. Plaster
39
Among listed what is load bearing wall?
Retaining Wall
40
What is a rod having surface irregularities, transverse ridges, and surface projections that increase its bond strength when used in reinforced concrete?
Deformed Bar