If a structure is built in an area with history of freezing winter temperatures and ice, a self adhering polymer modified bitumin underlayment must extend from the eaves of the structures towhat minimum distance inside the exterior building line of the structure:

24”

What is the maximum elevation below the threshold of an egress door for the landing or floor:

1 1/2"

Fireblocks in a concealed space of stud walls and partitions must be at what horizontal intervals:

10'

On a two story wood framed house how far does the footer protrude past the foundation walls on each side of the foundation wall:

Concrete in walls, footings or beams of appreciable height should be placed in horizontal layers not exceeding:

18"

The top of foundation walls should be a minimum of how far above the finish ground level:

6 inches

What is the minimum amount of resting surface for a joist on masonry:

A load bearing masonry wall must have what minimum thickness:

4”

What is the minimum thickness mortar bed for setting glass block:

1/4”

What should be the maximum thickness for a brick mortar joint if not the initial bed joint:

3/8”

At what minimum distance from the foundation must grading away from and down from take place:

10’

What is the maximum spacing for fasteners of the wall bottom steel track to the foundation:

6’

A hole in a floor joist may be done no closer than what dimension of the top or bottom of the joist:

2”

What is the minimum separation from earth for any wood framing member that is not pessure treated:

18”

What is the minimum flange width for a steel stud:

1 5/8"

What is the minimum flange width for steel framing track or runner:

1 1/4"

What is the minimum attachment face of a 25 ga steel stud:

1 5/8"

What is the maximum spacing for fasteners of the wall bottom steel track to the foundation:

6’

What size screw is recommended to fasten a steel non- load bearing studs to their tracks:

What is the maximum size hole in a 2 X 4 steel wall stud:

1 1/2”