Staff
問題一覧
1
The required force to pull the vent manifold into the closed position is____.
6 to 7 pounds
2
The torque of the cylinder to the F-2B life raft is _____.
140 to 150 pounds
3
Lanyards on the LPU 3/P AND 10/P are manufactured at ____.
4-1/2 +1/4 – 0
4
The LPU-6/P (INFANT COT) securing straps length is ____.
17 to 19 inches
5
The PSI of the LPU 3/P, 10/P and 6/P life preservers is ____.
2 PSI
6
The length of sea anchor retention line nylon cord for the LRU-1/P is ____.
15 foot ±6 inches
7
The length of sea anchor retention line nylon cord for the F-2B life raft is ____.
25 foot ±6 inches
8
At every ____inspection cycle, the F-2 life raft will be flipped over prior to repack.
Third
9
The length of the actuating line of the life raft is ____.
5 feet
10
To hold flares in place, the use of _____ is acceptable
Rubber Band
11
When stenciling flares date of installation, use _____inch letters.
1/4 or 1/2
12
Flares do not have space available for stenciling DOI. When stenciling, use month and year format as ____.
Jan 1998
13
_______ Cord is NOT authorized in combat zones for lanyards on survival kits.
White
14
Lanyards will be a minimum of ____ inches and maximum of ____ inches in length.
30 to 36 inches
15
Tourniquets are secured to the survival kits with ____.
8/4 (olive drab), unwaxed
16
To secure the flare to the survival kit, form a ____ inch non slipping loop in the free end of retaining lanyard.
1-1/2 inch
17
The length of the neck lanyard for the compass is ____ in circumference.
60 inches
18
The compass has a shelf life of how many years?
12
19
The service life of the compass is stamped in which format?
Year/Month/Lot#
20
The retention cord on the life raft repair plugs are a length of ____.
16 to 18 inches
21
IR Chem lights have a shelf life of ____.
36 months
22
Standard Chem lights have a shelf life of ____.
48 months
23
Tourniquets are places in a plastic bag and configured in what configuration?
One-hand configuration
24
Flex pack water has a shelf life of _____months.
60 months
25
The MBU-12/P mask comes in how many sizes?
5
26
The CRU-8/P connector is essentially a _____manifold block.
Three-way
27
The CrU-8/P force required to disconnect should be between ___ and __ pounds. This force shall be applied with a slow steady pull.
12 and 20 pounds
28
CSEL Operating temperature is ___.
-20 °C to +55 °C
29
CSEL Storage Temperature of Radio and/or Battery is ____.
-40 °C to +71 °C
30
Saltwater Immersion depth/duration is ____
1 Meter (m) for 12 hours; 10 M for 5 minutes
31
The factory frequencies of the CSEL Radio are ____.
121.5, 123.1, 243.0, 282.8 MHz
32
GPS time is recommended pre-mission, or no longer than _____ days prior, to provide accuracy needed for immediate Ultra High Frequency Satellite Communications (UHF SATCOM).
5 Days
33
The Radio’s gaining/responsible unit shall register the radio into the ______before being issued to operational personnel.
Joint SARSAT Electronic Tracking System (JSETS)
34
If a BIT failure occurs, rerun BIT up to an additional ____ times.
2
35
It is a security violation to open or access internal radio components.
True
36
When replacing the antenna on the CSEL radio, the antenna is torque to ____.
40 ± 4 in-oz
37
A non-rechargeable battery with a capacity of ____ or greater may remain in service.
80%
38
Adjust the air pressure to ____ psi when conducting the water immersion test.
3 psi
39
The URT-46 Beacon integrates with what equipment?
ACES II Kits, BA-22, and LPP parachutes
40
The URT-46 is equipped with two external trailing antennas. What are they?
VHF/UHF AND Trailing GPS
41
The AN/URT-46 can also provide homing signals on what frequencies?
121.5 MHz and 243 MHz
42
The AN/URT-46 can operate in how many different modes?
4
43
What are the modes of operation for AN/URT46?
Triple BCN, Dual Frequency, 406 Only Mode, and BIT Test
問題一覧
1
The required force to pull the vent manifold into the closed position is____.
6 to 7 pounds
2
The torque of the cylinder to the F-2B life raft is _____.
140 to 150 pounds
3
Lanyards on the LPU 3/P AND 10/P are manufactured at ____.
4-1/2 +1/4 – 0
4
The LPU-6/P (INFANT COT) securing straps length is ____.
17 to 19 inches
5
The PSI of the LPU 3/P, 10/P and 6/P life preservers is ____.
2 PSI
6
The length of sea anchor retention line nylon cord for the LRU-1/P is ____.
15 foot ±6 inches
7
The length of sea anchor retention line nylon cord for the F-2B life raft is ____.
25 foot ±6 inches
8
At every ____inspection cycle, the F-2 life raft will be flipped over prior to repack.
Third
9
The length of the actuating line of the life raft is ____.
5 feet
10
To hold flares in place, the use of _____ is acceptable
Rubber Band
11
When stenciling flares date of installation, use _____inch letters.
1/4 or 1/2
12
Flares do not have space available for stenciling DOI. When stenciling, use month and year format as ____.
Jan 1998
13
_______ Cord is NOT authorized in combat zones for lanyards on survival kits.
White
14
Lanyards will be a minimum of ____ inches and maximum of ____ inches in length.
30 to 36 inches
15
Tourniquets are secured to the survival kits with ____.
8/4 (olive drab), unwaxed
16
To secure the flare to the survival kit, form a ____ inch non slipping loop in the free end of retaining lanyard.
1-1/2 inch
17
The length of the neck lanyard for the compass is ____ in circumference.
60 inches
18
The compass has a shelf life of how many years?
12
19
The service life of the compass is stamped in which format?
Year/Month/Lot#
20
The retention cord on the life raft repair plugs are a length of ____.
16 to 18 inches
21
IR Chem lights have a shelf life of ____.
36 months
22
Standard Chem lights have a shelf life of ____.
48 months
23
Tourniquets are places in a plastic bag and configured in what configuration?
One-hand configuration
24
Flex pack water has a shelf life of _____months.
60 months
25
The MBU-12/P mask comes in how many sizes?
5
26
The CRU-8/P connector is essentially a _____manifold block.
Three-way
27
The CrU-8/P force required to disconnect should be between ___ and __ pounds. This force shall be applied with a slow steady pull.
12 and 20 pounds
28
CSEL Operating temperature is ___.
-20 °C to +55 °C
29
CSEL Storage Temperature of Radio and/or Battery is ____.
-40 °C to +71 °C
30
Saltwater Immersion depth/duration is ____
1 Meter (m) for 12 hours; 10 M for 5 minutes
31
The factory frequencies of the CSEL Radio are ____.
121.5, 123.1, 243.0, 282.8 MHz
32
GPS time is recommended pre-mission, or no longer than _____ days prior, to provide accuracy needed for immediate Ultra High Frequency Satellite Communications (UHF SATCOM).
5 Days
33
The Radio’s gaining/responsible unit shall register the radio into the ______before being issued to operational personnel.
Joint SARSAT Electronic Tracking System (JSETS)
34
If a BIT failure occurs, rerun BIT up to an additional ____ times.
2
35
It is a security violation to open or access internal radio components.
True
36
When replacing the antenna on the CSEL radio, the antenna is torque to ____.
40 ± 4 in-oz
37
A non-rechargeable battery with a capacity of ____ or greater may remain in service.
80%
38
Adjust the air pressure to ____ psi when conducting the water immersion test.
3 psi
39
The URT-46 Beacon integrates with what equipment?
ACES II Kits, BA-22, and LPP parachutes
40
The URT-46 is equipped with two external trailing antennas. What are they?
VHF/UHF AND Trailing GPS
41
The AN/URT-46 can also provide homing signals on what frequencies?
121.5 MHz and 243 MHz
42
The AN/URT-46 can operate in how many different modes?
4
43
What are the modes of operation for AN/URT46?
Triple BCN, Dual Frequency, 406 Only Mode, and BIT Test