暗記メーカー

暗記メーカー

​

general 6

general 6
56問 • 2年前
  • ユーザ名非公開
    • 通報

    問題一覧

  • 1

    Under what circumstances may the FAA refuse to issue a special flight permit under the provisions of title 14 CFR part 21.197

    For conducting customer demonstration flights in new production aircraft that have not satisfactory completed production flight test

  • 2

    Each person performing an annual or 100 hour inspection shall use a checklist that contains at least those items in the

    14 CFR, part 43 (Could say appendix D)

  • 3

    An FAA form 337 is used to record and document

    Major repairs, and major alterations

  • 4

    Major repairs, and major alterations to a light sport aircraft requires

    An entry into the maintenance records and an FAA form 337 in duplicate

  • 5

    After a mechanic, holding an airframe and powerplant rating, completes a 100 hour inspection, what action is required before the aircraft is returned to service

    Make the proper entries in the aircraft maintenance record

  • 6

    which of the following may a certificated, airframe and powerplant mechanic, perform on an aircraft and approved for return to service 1) 100 hour inspections 2). Annual inspections. 3) progressive inspections (under specified circumstances)

    1, 3

  • 7

    When approving for return to service after maintenance or alteration, the approving person must enter in the maintenance record of the aircraft

    A description (Or reference to acceptable data) Of work performed date of completion, the name of the person performing the work(If someone else) Signature certificate number, and kind of certificate held

  • 8

    What is/are the appropriate actions concerning minor repairs performed on a certificated aircraft 1) Entries must be made in the aircraft maintenance record 2)FAA form 337 must be completed 3) The owner of the aircraft must submit a record of all minor repairs to the FAA at least annually

    2

  • 9

    When work is performed on an aircraft that necessitates the use of FAA form, 337 who should prepare the form

    The person who performs or supervises the work

  • 10

    What is the status of data used as a basis for approving major repairs or alterations for return to service?

    Data must be FAA approved prior to its use for that purpose

  • 11

    Which statement is true regarding the use of FAA form 337

    FAA form 337 is not authorized for use with other than the US registered aircraft

  • 12

    After making a certain repair to an aircraft engine, that is to be returned to service and FAA form 337 is prepared how many copies are required and what is the disposition of the completed forms

    2. one copy for the aircraft owner and one copy for the FAA

  • 13

    Who is responsible for upkeep of the required maintenance records for an aircraft

    The aircraft owner

  • 14

    For aircraft operated under part 91 which of the following records must be retained for at least one year, or until the work is repeated or superseded

    Records of maintenance alterations, preventative maintenance, one Hundred hour, Annual and progressive inspections

  • 15

    A certificated mechanic without an inspection authorization who signed the appropriate block on FAA form 337 is doing what

    Certifying that the work was done in accordance with the requirements of 14 CFR, part 43

  • 16

    For aircraft operated under part 91, which of the following records must be retained and transferred with the aircraft when it is sold

    Records of current status of applicable ADs and date and time when recurring ADs are next due

  • 17

    If you do an annual on the 15th of the month, when would the next one be due?

    The last day of the 12th month

  • 18

    An aircraft owner was provided a list of discrepancies on an aircraft that was not approved for return to service after an annual inspection, which of the following statements is/our true concerning who may correct the discrepancies 1) only a mechanic with an inspection authorization 2) An appropriately rated mechanic 3) Any certificated repair station

    2

  • 19

    When a discrepancy list is provided to an aircraft owner or operator after an inspection, it says in effect that

    Except for these discrepancies, the item inspected is airworthy

  • 20

    In order to reconstruct, lost or destroyed aircraft maintenance records, what is necessary to establish it

    Total time in service of the airframe

  • 21

    Who is responsible for making the entry in the maintenance records after an annual 100 hour or progressive inspection?

    The person approving or disapproving for return to service

  • 22

    which aircraft record entry best describes a repair of a dent in a tubular steel structure dented at a cluster

    Welded a reinforcing plate over the dented area

  • 23

    A person installing a product part appliance on a type certificated product must make certain that the items records document document what type of statement

    Product part or material meets FAA airworthiness standards

  • 24

    If more space is needed for work, description entered on FAA form 337. What information should be included on the attached sheets, in addition to the rest of the work description

    Aircraft, nationality, and registration mark and the date the work was accomplished

  • 25

    For aircraft operated under part 91 what difference is there if any between record entry requirements for maintenance? (E.G.repair or alteration) And the record entry requirements for inspections(Beyond the description of the work performed, and the type and extent of inspection)

    Aircraft total time is required to be included only in the inspection entry

  • 26

    For aircraft operated Under part 91 when is aircraft total time required to be recorded in aircraft maintenance records

    After satisfactorily completing inspections

  • 27

    When a 100 hour inspection is completed if separate maintenance records for the airframe power, plants and propellers are maintained. Where is the entry for the inspection recorded

    In each record

  • 28

    Which statement is true regarding the requirements for maintenance record format

    Any format which provides record continuity, and includes the required information may be used

  • 29

    After an annual inspection is performed any defect found must be listed and provided to the owner and kept for how long

    Until the defects are corrected

  • 30

    What is the means by which the FAA notifies aircraft owners, and other interested persons of unsafe conditions, and prescribes the condition under which the product may continue to be operated?

    Airworthiness directives

  • 31

    Which is an appliance major repair

    overhaul of A hydraulic pressure pump

  • 32

    Where should you find this entry? “ Removed right wing from aircraft and remove skin from outer 6 feet. Repaired buckled spar, 49 inches from tip in accordance with figure 8 in the manufacturer structural repair manual number 28 – 1”

    FAA form 337

  • 33

    Which maintenance action is an airframe major repair

    The repair of portions of skin sheets by making additional seams

  • 34

    Which aircraft record entry is the best description of the replacement of several damaged tile coils in a casting

    Eight 1/4(20 inch standard heli coils were replaced. The damaged inserts were extracted the tap holes gauged the new inserts installed and tangs removed)

  • 35

    Which maintenance record entry best describes the action taken for a control cable showing approximately 20% wear, on several of the individual outer wires at a fairlead

    wear within acceptable limits repair not necessary

  • 36

    Which maintenance record entry best describes the action taken for a .125 inch deep dent in a straight section of 1/2 inch aluminum alloy tubing

    Dented section removed and replaced with identical new tubing flared to 37°

  • 37

    During an annual inspection, if a defect is found, which makes the aircraft unworthy the person disapproving must

    Provide a written notice of the defect to the owner

  • 38

    If work performed on an aircraft has been done satisfactorily The signature of an authorized person on the maintenance records for maintenance or alterations performed constitutes

    Approval for return to service only for the work performed

  • 39

    Where is the record of compliance with airworthiness directives or manufacturer service Bulletins normally indicated

    Aircraft, maintenance records

  • 40

    What is the ratio of a gasoline fuel load of 200 gallons to one of 1680 pounds

    5 : 7

  • 41

    How much current does a 30 V 1/2 horsepower motor that is 85% efficient draw from the bus (Note one horsepower equals 746 W)

    14.6 amp

  • 42

    maximum life for certain part is 1100 hours recently 15 of these parts were removed from different aircraft with an average life of 835.3 hours what percent of the maximum life has been achieved

    75.9%

  • 43

    The parts departments Profit is 12% on a new part how much does the part cost if the selling price is $145.60

    $130

  • 44

    A certain aircraft bolt has an overall length of 1-1/2 inches with a shank length of 1- 3/16 inches and a threaded portion length of 5/8 of an inch. What is the grip length

    .5625 inch

  • 45

    Examples of units used in the Conventional(US or English) Measurement include

    Inch ounce and pound

  • 46

    What is the speed ratio of a gear with 36 teeth meshed to a gear with 20 teeth?

    1:1:8

  • 47

    a pinion gear with 14 teeth is driving a spur gear with 42 teeth at 140 RPM determine the speed of the pinion gear

    420rpm

  • 48

    If an airplane has 2 28 gallon fuel tanks, how many quarts would it contain if they are full?

    224

  • 49

    A four-cylinder aircraft engine has a cylinder bore of 3.78 inches and is 8.5 inches deep with the piston on bottom center at the top of the piston measures 4 inches from the bottom of the cylinder. What is the approximate piston displacement of this engine

    200 cubic inches

  • 50

    A rectangular shaped fuel tank measures 37-1/2 inches in length 14 inches in width and 8-1/4 Inches in depth how many cubic inches are within the tank

    4331.25

  • 51

    A six cylinder engine with a bore of 3.5 inches a cylinder height of 7 inches and a stroke of 4.5 inches will have a total piston displacement of

    259.77 cubic inches

  • 52

    If the volume of a cylinder with the piston at bottom center is 84 in.³ and the piston displacement is 70 in.³ then the compression ratio is

    6 : 1

  • 53

    What is the speed of a spur gear with 42 teeth driven by a pinion gear With 14 teeth turning 420 RPM

    140 RPM

  • 54

    What force is exerted on the piston and a hydraulic cylinder if the area of the piston is 1.2 in.² and the fluid pressure is 850 PSI

    1020 pounds

  • 55

    A rectangular shaped fuel tank measures 60 inches in length 30 inches and width and 12 inches in depth how many cubic feet are within the tank

    12.5

  • 56

    What is the piston displacement of a master cylinder with a 1.5 inch diameter bore and a piston stroke of 4 inches?

    7.0686 cubic inches

    • general

    general

    ユーザ名非公開 · 197問 · 2年前

    general

    general

    197問 • 2年前
    ユーザ名非公開

    問題一覧

  • 1

    Under what circumstances may the FAA refuse to issue a special flight permit under the provisions of title 14 CFR part 21.197

    For conducting customer demonstration flights in new production aircraft that have not satisfactory completed production flight test

  • 2

    Each person performing an annual or 100 hour inspection shall use a checklist that contains at least those items in the

    14 CFR, part 43 (Could say appendix D)

  • 3

    An FAA form 337 is used to record and document

    Major repairs, and major alterations

  • 4

    Major repairs, and major alterations to a light sport aircraft requires

    An entry into the maintenance records and an FAA form 337 in duplicate

  • 5

    After a mechanic, holding an airframe and powerplant rating, completes a 100 hour inspection, what action is required before the aircraft is returned to service

    Make the proper entries in the aircraft maintenance record

  • 6

    which of the following may a certificated, airframe and powerplant mechanic, perform on an aircraft and approved for return to service 1) 100 hour inspections 2). Annual inspections. 3) progressive inspections (under specified circumstances)

    1, 3

  • 7

    When approving for return to service after maintenance or alteration, the approving person must enter in the maintenance record of the aircraft

    A description (Or reference to acceptable data) Of work performed date of completion, the name of the person performing the work(If someone else) Signature certificate number, and kind of certificate held

  • 8

    What is/are the appropriate actions concerning minor repairs performed on a certificated aircraft 1) Entries must be made in the aircraft maintenance record 2)FAA form 337 must be completed 3) The owner of the aircraft must submit a record of all minor repairs to the FAA at least annually

    2

  • 9

    When work is performed on an aircraft that necessitates the use of FAA form, 337 who should prepare the form

    The person who performs or supervises the work

  • 10

    What is the status of data used as a basis for approving major repairs or alterations for return to service?

    Data must be FAA approved prior to its use for that purpose

  • 11

    Which statement is true regarding the use of FAA form 337

    FAA form 337 is not authorized for use with other than the US registered aircraft

  • 12

    After making a certain repair to an aircraft engine, that is to be returned to service and FAA form 337 is prepared how many copies are required and what is the disposition of the completed forms

    2. one copy for the aircraft owner and one copy for the FAA

  • 13

    Who is responsible for upkeep of the required maintenance records for an aircraft

    The aircraft owner

  • 14

    For aircraft operated under part 91 which of the following records must be retained for at least one year, or until the work is repeated or superseded

    Records of maintenance alterations, preventative maintenance, one Hundred hour, Annual and progressive inspections

  • 15

    A certificated mechanic without an inspection authorization who signed the appropriate block on FAA form 337 is doing what

    Certifying that the work was done in accordance with the requirements of 14 CFR, part 43

  • 16

    For aircraft operated under part 91, which of the following records must be retained and transferred with the aircraft when it is sold

    Records of current status of applicable ADs and date and time when recurring ADs are next due

  • 17

    If you do an annual on the 15th of the month, when would the next one be due?

    The last day of the 12th month

  • 18

    An aircraft owner was provided a list of discrepancies on an aircraft that was not approved for return to service after an annual inspection, which of the following statements is/our true concerning who may correct the discrepancies 1) only a mechanic with an inspection authorization 2) An appropriately rated mechanic 3) Any certificated repair station

    2

  • 19

    When a discrepancy list is provided to an aircraft owner or operator after an inspection, it says in effect that

    Except for these discrepancies, the item inspected is airworthy

  • 20

    In order to reconstruct, lost or destroyed aircraft maintenance records, what is necessary to establish it

    Total time in service of the airframe

  • 21

    Who is responsible for making the entry in the maintenance records after an annual 100 hour or progressive inspection?

    The person approving or disapproving for return to service

  • 22

    which aircraft record entry best describes a repair of a dent in a tubular steel structure dented at a cluster

    Welded a reinforcing plate over the dented area

  • 23

    A person installing a product part appliance on a type certificated product must make certain that the items records document document what type of statement

    Product part or material meets FAA airworthiness standards

  • 24

    If more space is needed for work, description entered on FAA form 337. What information should be included on the attached sheets, in addition to the rest of the work description

    Aircraft, nationality, and registration mark and the date the work was accomplished

  • 25

    For aircraft operated under part 91 what difference is there if any between record entry requirements for maintenance? (E.G.repair or alteration) And the record entry requirements for inspections(Beyond the description of the work performed, and the type and extent of inspection)

    Aircraft total time is required to be included only in the inspection entry

  • 26

    For aircraft operated Under part 91 when is aircraft total time required to be recorded in aircraft maintenance records

    After satisfactorily completing inspections

  • 27

    When a 100 hour inspection is completed if separate maintenance records for the airframe power, plants and propellers are maintained. Where is the entry for the inspection recorded

    In each record

  • 28

    Which statement is true regarding the requirements for maintenance record format

    Any format which provides record continuity, and includes the required information may be used

  • 29

    After an annual inspection is performed any defect found must be listed and provided to the owner and kept for how long

    Until the defects are corrected

  • 30

    What is the means by which the FAA notifies aircraft owners, and other interested persons of unsafe conditions, and prescribes the condition under which the product may continue to be operated?

    Airworthiness directives

  • 31

    Which is an appliance major repair

    overhaul of A hydraulic pressure pump

  • 32

    Where should you find this entry? “ Removed right wing from aircraft and remove skin from outer 6 feet. Repaired buckled spar, 49 inches from tip in accordance with figure 8 in the manufacturer structural repair manual number 28 – 1”

    FAA form 337

  • 33

    Which maintenance action is an airframe major repair

    The repair of portions of skin sheets by making additional seams

  • 34

    Which aircraft record entry is the best description of the replacement of several damaged tile coils in a casting

    Eight 1/4(20 inch standard heli coils were replaced. The damaged inserts were extracted the tap holes gauged the new inserts installed and tangs removed)

  • 35

    Which maintenance record entry best describes the action taken for a control cable showing approximately 20% wear, on several of the individual outer wires at a fairlead

    wear within acceptable limits repair not necessary

  • 36

    Which maintenance record entry best describes the action taken for a .125 inch deep dent in a straight section of 1/2 inch aluminum alloy tubing

    Dented section removed and replaced with identical new tubing flared to 37°

  • 37

    During an annual inspection, if a defect is found, which makes the aircraft unworthy the person disapproving must

    Provide a written notice of the defect to the owner

  • 38

    If work performed on an aircraft has been done satisfactorily The signature of an authorized person on the maintenance records for maintenance or alterations performed constitutes

    Approval for return to service only for the work performed

  • 39

    Where is the record of compliance with airworthiness directives or manufacturer service Bulletins normally indicated

    Aircraft, maintenance records

  • 40

    What is the ratio of a gasoline fuel load of 200 gallons to one of 1680 pounds

    5 : 7

  • 41

    How much current does a 30 V 1/2 horsepower motor that is 85% efficient draw from the bus (Note one horsepower equals 746 W)

    14.6 amp

  • 42

    maximum life for certain part is 1100 hours recently 15 of these parts were removed from different aircraft with an average life of 835.3 hours what percent of the maximum life has been achieved

    75.9%

  • 43

    The parts departments Profit is 12% on a new part how much does the part cost if the selling price is $145.60

    $130

  • 44

    A certain aircraft bolt has an overall length of 1-1/2 inches with a shank length of 1- 3/16 inches and a threaded portion length of 5/8 of an inch. What is the grip length

    .5625 inch

  • 45

    Examples of units used in the Conventional(US or English) Measurement include

    Inch ounce and pound

  • 46

    What is the speed ratio of a gear with 36 teeth meshed to a gear with 20 teeth?

    1:1:8

  • 47

    a pinion gear with 14 teeth is driving a spur gear with 42 teeth at 140 RPM determine the speed of the pinion gear

    420rpm

  • 48

    If an airplane has 2 28 gallon fuel tanks, how many quarts would it contain if they are full?

    224

  • 49

    A four-cylinder aircraft engine has a cylinder bore of 3.78 inches and is 8.5 inches deep with the piston on bottom center at the top of the piston measures 4 inches from the bottom of the cylinder. What is the approximate piston displacement of this engine

    200 cubic inches

  • 50

    A rectangular shaped fuel tank measures 37-1/2 inches in length 14 inches in width and 8-1/4 Inches in depth how many cubic inches are within the tank

    4331.25

  • 51

    A six cylinder engine with a bore of 3.5 inches a cylinder height of 7 inches and a stroke of 4.5 inches will have a total piston displacement of

    259.77 cubic inches

  • 52

    If the volume of a cylinder with the piston at bottom center is 84 in.³ and the piston displacement is 70 in.³ then the compression ratio is

    6 : 1

  • 53

    What is the speed of a spur gear with 42 teeth driven by a pinion gear With 14 teeth turning 420 RPM

    140 RPM

  • 54

    What force is exerted on the piston and a hydraulic cylinder if the area of the piston is 1.2 in.² and the fluid pressure is 850 PSI

    1020 pounds

  • 55

    A rectangular shaped fuel tank measures 60 inches in length 30 inches and width and 12 inches in depth how many cubic feet are within the tank

    12.5

  • 56

    What is the piston displacement of a master cylinder with a 1.5 inch diameter bore and a piston stroke of 4 inches?

    7.0686 cubic inches