ram air

ambient and 1,000 degrees depending on the section of the engine

Multi-engine aircraft primarily to house the engines

cables, Teleflex control and control rods

additional weight and friction

controlled and uncontrolled.

abnormal operation

the artificial feel unit and a Throttle Control unit (TCU), by adjustable rods

a fireproof bulkhead Firewall

separates wet zone from dry zone

the aircraft weight and balance will not be adversely affected when the engine is removed

Prior to removal and fitted after the engine is mounted

all open pipes must be blanked off to prevent foreign particle ingress

Possible in case the aircraft is multi-engine No manufacturer approval required.

vertical, side and thrust loads to the aircraft pylon

the engine mounted cone bolts

rods ,bell crank and cables

25% support combustion and 75% cooling

composite material which will be abraded away should the tip of a rotating blade touch the material. That maintain minimum tip clearance but do not effect balance

house the engines. They are located below, or at the leading edge of the wing or on the tail of the aircraft.