暗記メーカー

CHAPTER7B (PART2)

CHAPTER7B (PART2)

18問 • 1年前

Dorian Pinuellas

問題一覧

1

What two factors make up the air metering force in a pressure carburetor? a. ______________ b. ______________

impact air, Venturi suction

2

The mixture control in a pressure carburetor varies the fuel/air ratio by controlling the _________ (air or fuel) metering force.

air

3

A water injection system used on reciprocating engines may also be referred to as ______-____________ injection.

anti detonation

4

Field adjustments to carburetors are generally limited to: a. ______________ b. ______________

idle speed, idle mixture

5

______________________________ (continuous flow or direct injection) fuel injection systems meter the fuel and deliver it to the intake port of each cylinder

continuous flow

6

Two functions of the flow divider valve during idle conditions are: a. ______________ b. ______________

creates downstream pressure for fuel control, cuts off fuel and leaves the lines full of fuel

7

RSA fuel injector nozzles ___________ (are or are not) interchangeable between engines and between cylinders.

are

8

Lengthening the connecting rod between the throttle fuel valve and the throttle air valve of an RSA injection system ___________ (richens or leans) the idling fuel/air mixture.

richens

9

The adjustable orifice in a Teledyne Continental Motors fuel injection pump adjusts the ___________ (high or low) unmetered fuel pressure.

high

10

The relief valve in the Teledyne Continental Motors fuel injection pump adjusts the ___________ (high or low) unmetered fuel pressure.

low

11

Vapor is removed from the fuel in a Teledyne Continental Motors fuel injection system in the ___________________ ______________ (what unit).

fuel pump

12

The orifice in a Teledyne Continental Motors fuel injection pump used with a turbocharged engine is automatically adjusted by an evacuated ___________.

bellows

13

The orifice size in a Teledyne Continental Motors fuel injection pump is varied by the amount of upper deck pressure. This pressure is actually the ___________ ___________ pressure.

turbocharger discharge

14

The manual mixture control in a Teledyne Continental Motors fuel injection system is a form of ___________ valve.

selector

15

The ____________ ____________ in the fuel control unit limits the maximum amount of fuel that can flow in a Teledyne-Continental fuel injection system during full-throttle, full-rich operating conditions.

metering orifice

16

Two basic functions of the fuel manifold valve in a Teledyne-Continental fuel injection system are: a. ______________ B. ______________

distribute fuel evenly to all cylinders, provide positive shut off of fuel

17

A set of C-size nozzles will flow one-half gallon of fuel per hour ___________ (more or less) than a set of B-size nozzles.

more

18

Fuel injector nozzles may be cleaned by soaking them in _____________ or _____________ ________.

acetone, lacquer thinner

CHAPTER 1A

CHAPTER 1A

Dorian Pinuellas · 53問 · 2年前

CHAPTER 1A

CHAPTER 1A

53問 • 2年前

Dorian Pinuellas

chapter1b

chapter1b

Dorian Pinuellas · 31問 · 2年前

chapter1b

chapter1b

31問 • 2年前

Dorian Pinuellas

CHAPTER3A

CHAPTER3A

Dorian Pinuellas · 27問 · 2年前

CHAPTER3A

CHAPTER3A

27問 • 2年前

Dorian Pinuellas

3a part2

3a part2

Dorian Pinuellas · 26問 · 2年前

3a part2

3a part2

26問 • 2年前

Dorian Pinuellas

CHAPTER4

CHAPTER4

Dorian Pinuellas · 20問 · 2年前

CHAPTER4

CHAPTER4

20問 • 2年前

Dorian Pinuellas

CHAPTER3B

CHAPTER3B

Dorian Pinuellas · 10問 · 2年前

CHAPTER3B

CHAPTER3B

10問 • 2年前

Dorian Pinuellas

CHAPTER4B

CHAPTER4B

Dorian Pinuellas · 28問 · 2年前

CHAPTER4B

CHAPTER4B

28問 • 2年前

Dorian Pinuellas

CHAPTER5B

CHAPTER5B

Dorian Pinuellas · 9問 · 2年前

CHAPTER5B

CHAPTER5B

9問 • 2年前

Dorian Pinuellas

CHAPTER6B

CHAPTER6B

Dorian Pinuellas · 13問 · 2年前

CHAPTER6B

CHAPTER6B

13問 • 2年前

Dorian Pinuellas

CHAPTER8E P858-862

CHAPTER8E P858-862

Dorian Pinuellas · 30問 · 1年前

CHAPTER8E P858-862

CHAPTER8E P858-862

30問 • 1年前

Dorian Pinuellas

CHAPTER8E PART2

CHAPTER8E PART2

Dorian Pinuellas · 24問 · 1年前

CHAPTER8E PART2

CHAPTER8E PART2

24問 • 1年前

Dorian Pinuellas

CHAPTER8F

CHAPTER8F

Dorian Pinuellas · 14問 · 1年前

CHAPTER8F

CHAPTER8F

14問 • 1年前

Dorian Pinuellas

CHAPTER7A

CHAPTER7A

Dorian Pinuellas · 12問 · 1年前

CHAPTER7A

CHAPTER7A

12問 • 1年前

Dorian Pinuellas

CHAPTER7B (PART 1)

CHAPTER7B (PART 1)

Dorian Pinuellas · 18問 · 1年前

CHAPTER7B (PART 1)

CHAPTER7B (PART 1)

18問 • 1年前

Dorian Pinuellas

CHAPTER 7C

CHAPTER 7C

Dorian Pinuellas · 15問 · 1年前

CHAPTER 7C

CHAPTER 7C

15問 • 1年前

Dorian Pinuellas

問題一覧

1

What two factors make up the air metering force in a pressure carburetor? a. ______________ b. ______________

impact air, Venturi suction

2

The mixture control in a pressure carburetor varies the fuel/air ratio by controlling the _________ (air or fuel) metering force.

air

3

A water injection system used on reciprocating engines may also be referred to as ______-____________ injection.

anti detonation

4

Field adjustments to carburetors are generally limited to: a. ______________ b. ______________

idle speed, idle mixture

5

______________________________ (continuous flow or direct injection) fuel injection systems meter the fuel and deliver it to the intake port of each cylinder

continuous flow

6

Two functions of the flow divider valve during idle conditions are: a. ______________ b. ______________

creates downstream pressure for fuel control, cuts off fuel and leaves the lines full of fuel

7

RSA fuel injector nozzles ___________ (are or are not) interchangeable between engines and between cylinders.

are

8

Lengthening the connecting rod between the throttle fuel valve and the throttle air valve of an RSA injection system ___________ (richens or leans) the idling fuel/air mixture.

richens

9

The adjustable orifice in a Teledyne Continental Motors fuel injection pump adjusts the ___________ (high or low) unmetered fuel pressure.

high

10

The relief valve in the Teledyne Continental Motors fuel injection pump adjusts the ___________ (high or low) unmetered fuel pressure.

low

11

Vapor is removed from the fuel in a Teledyne Continental Motors fuel injection system in the ___________________ ______________ (what unit).

fuel pump

12

The orifice in a Teledyne Continental Motors fuel injection pump used with a turbocharged engine is automatically adjusted by an evacuated ___________.

bellows

13

The orifice size in a Teledyne Continental Motors fuel injection pump is varied by the amount of upper deck pressure. This pressure is actually the ___________ ___________ pressure.

turbocharger discharge

14

The manual mixture control in a Teledyne Continental Motors fuel injection system is a form of ___________ valve.

selector

15

The ____________ ____________ in the fuel control unit limits the maximum amount of fuel that can flow in a Teledyne-Continental fuel injection system during full-throttle, full-rich operating conditions.

metering orifice

16

Two basic functions of the fuel manifold valve in a Teledyne-Continental fuel injection system are: a. ______________ B. ______________

distribute fuel evenly to all cylinders, provide positive shut off of fuel

17

A set of C-size nozzles will flow one-half gallon of fuel per hour ___________ (more or less) than a set of B-size nozzles.

more

18

Fuel injector nozzles may be cleaned by soaking them in _____________ or _____________ ________.

acetone, lacquer thinner