問題一覧
1
A semi-conductor electronic device or component that permits current to flow in only one direction.
Diode
2
SWOT is an analysis based on the gathered data from the immediate environment market. SWOT stands for?
Strengths, Weaknesses, Opportunities, Threats
3
The follow are principles of planning except:
Must be complex
4
It is the end of the nail plate that is shaped during manicure and pedicure.
Free edge
5
It refers to the study and practice of beauty culture.
Cosmetology
6
It is used for smoothing or for producing textured surfaces on cement plaster.
Common float
7
A wood finishing process that remove scratches and excess adhesive that remained on the surface by using sand paper of 180 to 280 grit size.
Sanding
8
These are event/exchanges which affect the asset, liabilities, owner's equity of an organization
Business transaction
9
Which of the following are commonly minced into small bits to be used as ingredients and garnishes.
Herbs, vegetables and nuts
10
It is any substance that has a useful function when taken into the cells of the body.
Nutrients
11
Which of the following are sources of albumin?
Vegetable and fruits
12
Compounds made up of carbon, hydrogen and oxygen formed by plants.
Carbohydrates
13
It is needed for growth, tissue repair, immune function, making essential hormones and enzymes, energy when carbohydrate is not available, and for preserving lean muscle mass.
Proteins
14
The process of thinning, tapering and shortening the hair.
Hair cutting
15
Overall term for parts of hygiene and cosmetology involving the hair on the human head.
Hair care
16
The correct misshaped eyebrows, it is best to use _________.
Eyebrow pencil
17
It is a device for converting a varying current from one voltage to another.
Transformer
18
Is a three-dimensional figure with a polygonal base and triangular lateral faces.
Prism
19
Stair unit which consist of one tread and one riser.
Step
20
The horizontal distance from the first step to the last riser of stair flight.
Run
21
Is a principal beam extending from wall to wall. It is the major horizontal support member upon which the floor system is laid.
Girder
22
An imaginary cut taken through an object so as to reveal a shape or interior contruction.
Section
23
Used to control a circuit from two different locations.
Three Way Switch
24
The fine line use to show clearly the dimension limits
Dimension line
25
A horizontal guide line drawn between cap line and base line used to determine the general height of lower case letters.
Cap line
26
The commonly used method in making Isometric Drawings.
Box method
27
It is a built-up frame commonly employed on a long span roof unsupported by intermediate columns or partitions. Is a series of triangles used to distribute load and stiffen the structure spacing which offer flexibility for the interior as well as strength and rigidity.
Truss
28
A drawing instrument that serves as guide in drawing vertical and diagonal lines in triangles. It is generally used in drawing horizontal lines.
T-square
29
Is part of the drain-waste system that allows you to gain access for cleaning clogged lines.
Cleanouts
30
In plumbing, DMV stands for ________.
Drainage, waste, vent
31
Prevents the back passage of air without materially affecting the flow of sewage through it.
Trap
32
The system of sewers or drainage of a town.
Sewerage
33
Describes water that is safe for drinking and cooking purposes.
Potable
34
Is known as two-point perspective drawing.
Angular perspective
35
Are circles having no common center.
Eccentric circle
36
The following are function the body except:
It prevents the nutrients to move around the body
37
The following are tips for chopping except:
Cut too fast
38
All of these foods are good sources of vitamin C. which one has the most vitamin C?
1 cup of orange sections
39
Water boild at 212 degrees. What does "rolling boil means" the bubble are ________.
Rolling non stop
40
Which nutrients is an anti-oxidant?
Vitamin E
41
What is the basis in computing the size of the size of a house drain?
Surge flow rate of water discharge from the kitchen sink.
42
A plumber needs to bend copper tubing without kicking it. Unfortunately, his pipe bender breaks. What is the best thing to do?
Use a tubing bender
43
This line is projected shorter line in a drawing.
Inclined line
44
If you are skilled electrician working on a house wiring installation and there is a need for you to join straight run wires, what kind of joint will you use?
Western union short and long tie
45
If the transistor is an NPN type the base is ______.
Positive
46
Which of the following is a safe and acceptable way to thaw a frozen chicken?
Gradual thawing under refrigeration
47
When semi-conductor diode's anode terminal is supplied with negative DC voltage and the cathode with positive DC voltage, the diode bias is.
Reverse
48
A good draftman will never letter without the use of ________.
Guidelines
49
If you are a licensed technician, how are you going to state the formulas for three equations of ohm's law?
E = I×R or I = E/R or R = E/I
50
Lumber is a good as its preparation. When it is dried the process involved is _________.
seasoning
51
There are numerous kinds of saw. The one used for sawing along the grain of wood is called __________.
Rip saw
52
When the diameter of cylindrical object is to be measured, the tool to be used is _________.
calliper
53
Fastening materials are important in woodworks. The most common of these materials is _________.
Nails
54
The smallest division of the metric scale that you can find in the steel rule is __________.
Millimeter
55
The strongest form of wood joint applicable for table legs is ________.
mortice and tenon
56
You are almost finished with your project. One of the procedures below is done before the application of finishing materials.
sanding
57
What is the conversion equivalent of one inch to centimetres?
2.54
58
A surfaced lumber where four of its sides are smooth or planed is called _________.
S4S
59
In carpentry, splicing or joining of wood using two side blocks is called _________.
Scarfing
60
A seasoned lumber is ideal for carpentry works. Which among the following is best to use?
Kiln dried
61
There is considerable number of wood joints. The simplest and easiest to make is _________.
Butt joint
62
In a wooden floor system, the major horizontal support member upon which the floor system is laid is _________.
Floor joist
63
A type of roof frame consisting of series of triangles used to distribute loads and stiffen the structure of the roof.
Truss
64
A wood product made of three or more veneer slice that are laid one upon the other and bonded with synthetic resin.
Plywood
65
Which of the following tools is used in checking the squareness of the corners and flatness of a surface?
Tri square
66
Find the total number of board feet of six pieces of lumber with a dimension of 2" x 4" x 12"
4 bd. ft.
67
Horizontal line are best drawn using this instrument
t-square
68
To completely describe a cone, sphere, and rectangular pyramid the number of views needed is _________.
Six
69
This line is projected as a shorter line in a drawing.
inclined line
70
Geometrical solids are usually drawn in _________.
Six views
71
These lines are used to indicate the measurement of objects and are represented by fine dark solid lines.
Dimension lines
72
If a drawing has an equal measure then it refers to ________.
Isometric drawing
73
Boxing method is most widely used method of drawing a/an __________.
Isometric view
74
When parts that are not seen are represented by series of light dash lines then this line is classified as _________.
Invisible line
75
If all the information needed to complete construction of a product is shown then this type of mechanical drawing is called _________.
Working drawing
76
One of the best practice of a good draftman is to NEVER letter without __________.
Guidelines
77
If a drawing has one surface that is parallel to the picture plane then this method is called ________.
Oblique drawing
78
This pictorial view is normally seen by the observer's eyes. Which one is it?
Perspective drawing
79
A drawing instrument that serves as a guide in drawing vertical and diagonal lines as in triangles. It is generally used in drawing horizontal lines. Which one is it?
Triangle
80
The fine line used to show clearly the dimension limits is called _________.
Dimension line
81
A type of section used to emphasize the interior construction of an object without destroying the continuity of the exterior view.
Phantom section or Hidden section
82
A horizontal guide line used to determine the general height of lower case letters.
Waist line
83
Letters that are composed of uniform width elements are classified as _________.
Text letters
84
The most widely used mansonry materials for construction works
Bricks
85
It is the mansory material manufactured from clay and other materials
Bricks
86
What is the tool used to guide the vertical position in laying bricks?
Plumb bob
87
Which of the following is NOT a requirement to consider in proportioning concrete mixture
Flexibility
88
Concrete is said to be workable if it can be molded or deformed without segregation. This characteristic is known as ________.
Workability
89
Following are factors that regulate the strength of concrete except one. Which is it?
Dropping concrete mixture from high elevation
90
What class of concrete mixture is consisting of 1 bag cement, 2 cu. ft. of sand, and 4 cu. ft. of gravel or 1:2:4?
Class A
91
Which among the following is a surface finishing tool for concrete?
Float
92
Bricks are laid where its longer side is exposed to view. This arrangement is called _________.
Stretcher
93
In setting up concrete pavers, what material is used to prevent erosion from drainage?
Filter fabric
94
A person who install pipes, fixtures and other apparatus to convey the supply water in buildings and to dispose and discharge waste water.
Plumber
95
What must be installed to prevent siphonage or backflow of the water seal in the drainage system?
Vent pipe
96
Which of the following is NOT required by the National Plumbing Code?
No ventilation pipe is needed
97
The pipe that conveys waste from various fixture other than from the water closet.
Waste pipe
98
It is a fitting or device that provides liquid seal to prevent the back passage of air.
Trap
99
The tools used to tighten or loosen hexagonal fittings like unions and other metal fittings.
Wrenches
100
It is a receptacle or vault used to collect organic waste discharged from the house sewer.
Septic tank
Problem Solving
Problem Solving
ZULHAMMEEN C. SENDAD · 23問 · 3年前Problem Solving
Problem Solving
23問 • 3年前CSE General Information
CSE General Information
ZULHAMMEEN C. SENDAD · 35問 · 3年前CSE General Information
CSE General Information
35問 • 3年前Table
Table
ZULHAMMEEN C. SENDAD · 7問 · 3年前Table
Table
7問 • 3年前Algebraic Expression / Translation
Algebraic Expression / Translation
ZULHAMMEEN C. SENDAD · 12問 · 3年前Algebraic Expression / Translation
Algebraic Expression / Translation
12問 • 3年前PREVIOUS LEA EXAM
PREVIOUS LEA EXAM
ZULHAMMEEN C. SENDAD · 240問 · 4年前PREVIOUS LEA EXAM
PREVIOUS LEA EXAM
240問 • 4年前Reading Comprehension
Reading Comprehension
ZULHAMMEEN C. SENDAD · 19問 · 3年前Reading Comprehension
Reading Comprehension
19問 • 3年前Identifying Error
Identifying Error
ZULHAMMEEN C. SENDAD · 22問 · 3年前Identifying Error
Identifying Error
22問 • 3年前Phil. Constitutions, Human Rights & R.A. 6713
Phil. Constitutions, Human Rights & R.A. 6713
ZULHAMMEEN C. SENDAD · 38問 · 3年前Phil. Constitutions, Human Rights & R.A. 6713
Phil. Constitutions, Human Rights & R.A. 6713
38問 • 3年前Paragraph Organization
Paragraph Organization
ZULHAMMEEN C. SENDAD · 10問 · 3年前Paragraph Organization
Paragraph Organization
10問 • 3年前Number Analogy
Number Analogy
ZULHAMMEEN C. SENDAD · 9問 · 3年前Number Analogy
Number Analogy
9問 • 3年前Sentence Structure (Grammar & Correct Usage)
Sentence Structure (Grammar & Correct Usage)
ZULHAMMEEN C. SENDAD · 14問 · 3年前Sentence Structure (Grammar & Correct Usage)
Sentence Structure (Grammar & Correct Usage)
14問 • 3年前Logical Analysis (Assumption)
Logical Analysis (Assumption)
ZULHAMMEEN C. SENDAD · 10問 · 3年前Logical Analysis (Assumption)
Logical Analysis (Assumption)
10問 • 3年前Vocabulary
Vocabulary
ZULHAMMEEN C. SENDAD · 8問 · 3年前Vocabulary
Vocabulary
8問 • 3年前Sentence Completion
Sentence Completion
ZULHAMMEEN C. SENDAD · 12問 · 3年前Sentence Completion
Sentence Completion
12問 • 3年前Word Analogy
Word Analogy
ZULHAMMEEN C. SENDAD · 32問 · 3年前Word Analogy
Word Analogy
32問 • 3年前PENOLOGY EXAMINATION
PENOLOGY EXAMINATION
ZULHAMMEEN C. SENDAD · 55問 · 3年前PENOLOGY EXAMINATION
PENOLOGY EXAMINATION
55問 • 3年前CSE General Information
CSE General Information
ZULHAMMEEN C. SENDAD · 8問 · 3年前CSE General Information
CSE General Information
8問 • 3年前問題一覧
1
A semi-conductor electronic device or component that permits current to flow in only one direction.
Diode
2
SWOT is an analysis based on the gathered data from the immediate environment market. SWOT stands for?
Strengths, Weaknesses, Opportunities, Threats
3
The follow are principles of planning except:
Must be complex
4
It is the end of the nail plate that is shaped during manicure and pedicure.
Free edge
5
It refers to the study and practice of beauty culture.
Cosmetology
6
It is used for smoothing or for producing textured surfaces on cement plaster.
Common float
7
A wood finishing process that remove scratches and excess adhesive that remained on the surface by using sand paper of 180 to 280 grit size.
Sanding
8
These are event/exchanges which affect the asset, liabilities, owner's equity of an organization
Business transaction
9
Which of the following are commonly minced into small bits to be used as ingredients and garnishes.
Herbs, vegetables and nuts
10
It is any substance that has a useful function when taken into the cells of the body.
Nutrients
11
Which of the following are sources of albumin?
Vegetable and fruits
12
Compounds made up of carbon, hydrogen and oxygen formed by plants.
Carbohydrates
13
It is needed for growth, tissue repair, immune function, making essential hormones and enzymes, energy when carbohydrate is not available, and for preserving lean muscle mass.
Proteins
14
The process of thinning, tapering and shortening the hair.
Hair cutting
15
Overall term for parts of hygiene and cosmetology involving the hair on the human head.
Hair care
16
The correct misshaped eyebrows, it is best to use _________.
Eyebrow pencil
17
It is a device for converting a varying current from one voltage to another.
Transformer
18
Is a three-dimensional figure with a polygonal base and triangular lateral faces.
Prism
19
Stair unit which consist of one tread and one riser.
Step
20
The horizontal distance from the first step to the last riser of stair flight.
Run
21
Is a principal beam extending from wall to wall. It is the major horizontal support member upon which the floor system is laid.
Girder
22
An imaginary cut taken through an object so as to reveal a shape or interior contruction.
Section
23
Used to control a circuit from two different locations.
Three Way Switch
24
The fine line use to show clearly the dimension limits
Dimension line
25
A horizontal guide line drawn between cap line and base line used to determine the general height of lower case letters.
Cap line
26
The commonly used method in making Isometric Drawings.
Box method
27
It is a built-up frame commonly employed on a long span roof unsupported by intermediate columns or partitions. Is a series of triangles used to distribute load and stiffen the structure spacing which offer flexibility for the interior as well as strength and rigidity.
Truss
28
A drawing instrument that serves as guide in drawing vertical and diagonal lines in triangles. It is generally used in drawing horizontal lines.
T-square
29
Is part of the drain-waste system that allows you to gain access for cleaning clogged lines.
Cleanouts
30
In plumbing, DMV stands for ________.
Drainage, waste, vent
31
Prevents the back passage of air without materially affecting the flow of sewage through it.
Trap
32
The system of sewers or drainage of a town.
Sewerage
33
Describes water that is safe for drinking and cooking purposes.
Potable
34
Is known as two-point perspective drawing.
Angular perspective
35
Are circles having no common center.
Eccentric circle
36
The following are function the body except:
It prevents the nutrients to move around the body
37
The following are tips for chopping except:
Cut too fast
38
All of these foods are good sources of vitamin C. which one has the most vitamin C?
1 cup of orange sections
39
Water boild at 212 degrees. What does "rolling boil means" the bubble are ________.
Rolling non stop
40
Which nutrients is an anti-oxidant?
Vitamin E
41
What is the basis in computing the size of the size of a house drain?
Surge flow rate of water discharge from the kitchen sink.
42
A plumber needs to bend copper tubing without kicking it. Unfortunately, his pipe bender breaks. What is the best thing to do?
Use a tubing bender
43
This line is projected shorter line in a drawing.
Inclined line
44
If you are skilled electrician working on a house wiring installation and there is a need for you to join straight run wires, what kind of joint will you use?
Western union short and long tie
45
If the transistor is an NPN type the base is ______.
Positive
46
Which of the following is a safe and acceptable way to thaw a frozen chicken?
Gradual thawing under refrigeration
47
When semi-conductor diode's anode terminal is supplied with negative DC voltage and the cathode with positive DC voltage, the diode bias is.
Reverse
48
A good draftman will never letter without the use of ________.
Guidelines
49
If you are a licensed technician, how are you going to state the formulas for three equations of ohm's law?
E = I×R or I = E/R or R = E/I
50
Lumber is a good as its preparation. When it is dried the process involved is _________.
seasoning
51
There are numerous kinds of saw. The one used for sawing along the grain of wood is called __________.
Rip saw
52
When the diameter of cylindrical object is to be measured, the tool to be used is _________.
calliper
53
Fastening materials are important in woodworks. The most common of these materials is _________.
Nails
54
The smallest division of the metric scale that you can find in the steel rule is __________.
Millimeter
55
The strongest form of wood joint applicable for table legs is ________.
mortice and tenon
56
You are almost finished with your project. One of the procedures below is done before the application of finishing materials.
sanding
57
What is the conversion equivalent of one inch to centimetres?
2.54
58
A surfaced lumber where four of its sides are smooth or planed is called _________.
S4S
59
In carpentry, splicing or joining of wood using two side blocks is called _________.
Scarfing
60
A seasoned lumber is ideal for carpentry works. Which among the following is best to use?
Kiln dried
61
There is considerable number of wood joints. The simplest and easiest to make is _________.
Butt joint
62
In a wooden floor system, the major horizontal support member upon which the floor system is laid is _________.
Floor joist
63
A type of roof frame consisting of series of triangles used to distribute loads and stiffen the structure of the roof.
Truss
64
A wood product made of three or more veneer slice that are laid one upon the other and bonded with synthetic resin.
Plywood
65
Which of the following tools is used in checking the squareness of the corners and flatness of a surface?
Tri square
66
Find the total number of board feet of six pieces of lumber with a dimension of 2" x 4" x 12"
4 bd. ft.
67
Horizontal line are best drawn using this instrument
t-square
68
To completely describe a cone, sphere, and rectangular pyramid the number of views needed is _________.
Six
69
This line is projected as a shorter line in a drawing.
inclined line
70
Geometrical solids are usually drawn in _________.
Six views
71
These lines are used to indicate the measurement of objects and are represented by fine dark solid lines.
Dimension lines
72
If a drawing has an equal measure then it refers to ________.
Isometric drawing
73
Boxing method is most widely used method of drawing a/an __________.
Isometric view
74
When parts that are not seen are represented by series of light dash lines then this line is classified as _________.
Invisible line
75
If all the information needed to complete construction of a product is shown then this type of mechanical drawing is called _________.
Working drawing
76
One of the best practice of a good draftman is to NEVER letter without __________.
Guidelines
77
If a drawing has one surface that is parallel to the picture plane then this method is called ________.
Oblique drawing
78
This pictorial view is normally seen by the observer's eyes. Which one is it?
Perspective drawing
79
A drawing instrument that serves as a guide in drawing vertical and diagonal lines as in triangles. It is generally used in drawing horizontal lines. Which one is it?
Triangle
80
The fine line used to show clearly the dimension limits is called _________.
Dimension line
81
A type of section used to emphasize the interior construction of an object without destroying the continuity of the exterior view.
Phantom section or Hidden section
82
A horizontal guide line used to determine the general height of lower case letters.
Waist line
83
Letters that are composed of uniform width elements are classified as _________.
Text letters
84
The most widely used mansonry materials for construction works
Bricks
85
It is the mansory material manufactured from clay and other materials
Bricks
86
What is the tool used to guide the vertical position in laying bricks?
Plumb bob
87
Which of the following is NOT a requirement to consider in proportioning concrete mixture
Flexibility
88
Concrete is said to be workable if it can be molded or deformed without segregation. This characteristic is known as ________.
Workability
89
Following are factors that regulate the strength of concrete except one. Which is it?
Dropping concrete mixture from high elevation
90
What class of concrete mixture is consisting of 1 bag cement, 2 cu. ft. of sand, and 4 cu. ft. of gravel or 1:2:4?
Class A
91
Which among the following is a surface finishing tool for concrete?
Float
92
Bricks are laid where its longer side is exposed to view. This arrangement is called _________.
Stretcher
93
In setting up concrete pavers, what material is used to prevent erosion from drainage?
Filter fabric
94
A person who install pipes, fixtures and other apparatus to convey the supply water in buildings and to dispose and discharge waste water.
Plumber
95
What must be installed to prevent siphonage or backflow of the water seal in the drainage system?
Vent pipe
96
Which of the following is NOT required by the National Plumbing Code?
No ventilation pipe is needed
97
The pipe that conveys waste from various fixture other than from the water closet.
Waste pipe
98
It is a fitting or device that provides liquid seal to prevent the back passage of air.
Trap
99
The tools used to tighten or loosen hexagonal fittings like unions and other metal fittings.
Wrenches
100
It is a receptacle or vault used to collect organic waste discharged from the house sewer.
Septic tank